Servo spline count.....what to use where...

[Charlie-III]

Originally Posted by canadianbacon

Thanks for the info Charlie, helped me out with the info I needed for Savox servos.

Originally Posted by ceedawwg

Don't see anything on Losi servo's...

Originally Posted by toka100

losi should be the same as jr. 23t. same as spectrum servos.

Thanks for the info guys..... I will update in a bit.

Is there a specific Losi servo, or all of them??

I can add to the list as required. Always looking to make this a better list.

[AddictedtoRC1]

Originally Posted by toka100

losi should be the same as jr. 23t. same as spectrum servos.

Spektrum servos are a 25 count.

[Charlie-III]

Originally Posted by toka100

losi should be the same as jr. 23t. same as spectrum servos.

Originally Posted by AddictedtoRC1

Spektrum servos are a 25 count.

Hmmm....maybe it depends on the Spektrum servo? Do either of you have examples with the spline count, we could always list them.

[ceedawwg]

Is there a specific Losi servo, or all of them??

Not sure of model # but whatever comes with the NC. I'm sure all Losi are the same right?

[toka100]

Originally Posted by Charlie-III

Hmmm....maybe it depends on the Spektrum servo? Do either of you have examples with the spline count, we could always list them.

im thinking of the older specturm servos. basicly rebranded jr. i will count a few new ones tomorrow at work. aircraft and surface.

[AddictedtoRC1]

I am currently running an A6020 Spektrum servo with a 25T spline count. I ran Spektrum's in all my old Nitros and they too were 25. I believe Savox is just a re branded Spektrum and they also are a 25.

[benoj]

I have a slightly older spektrum standard servo (only like 50oz torque) in my drifter and it is definitely a 23t spline


Sent from my iPad using Tapatalk

[toka100]

yah the old spectrum z590 is 23. just broke the servo arm on my x-ray t1fk05 after 6 years of use. the z590 has been in there since it was new

[dieselmudder]

if its not already on here, stock Losi LNC pn LOSB0812 is 23 and wraith/axial AS-2 is same as hi-tec 24

[Charlie-III]

Good link provided by Addicted...

Originally Posted by AddictedtoRC1

Here's a simple conversion table for you guys. I have used it and thought I would share.

Online Conversion - Torque Conversion

[Charlie-III]

Added info to 1st post....

[5VoltDetonator]

Originally Posted by AddictedtoRC1

I am currently running an A6020 Spektrum servo with a 25T spline count. I ran Spektrum's in all my old Nitros and they too were 25. I believe Savox is just a re branded Spektrum and they also are a 25.

Man! I was looking for this info! Thanks I really needed a slightly longer horn and wasn't sure which I needed.

I also got a 3 year old S6020 that is left over from my Associated SC10, I have been using in my scx-10 now for a while it seems ok?

Very interesting you think Savox is just re branded Spektrum

[Charlie-III]

Added info (ServoDatabase) to 1st post.

[Tinrabbit]

Excellent thread! Doing a lil shopping for servos soon & want to stay same spline as what I already have, this thread narrowed the search down. Now printed & posted on my board in the build room for easy reference

[johnnyh66]

Originally Posted by Charlie-III

23 splines: Solar

Hot damn, thanks Charlie... searching works!