Tired of novak headaches what should i get?

[mtgrizzlymn]

I run a goat3 on 3s pack in my wraith, which other systems would give same power and crawlability as this does. It runs an 18.5 brushless now. Thankyou ive ran only novak for22 years so i know nothing about other electronics.

[King James]

Mamba max pro is what I use on my honcho. They majority of my friends run them to. Still gives you drag brake(as long as you use the castle link) and it gives you tons of tuning options

[Postclanker]

Try a Mamba Max pro...it'll handle anything.
I ran Tekin for close to 30 years of on and off rc of all kinds...just recently tried a MM pro and now an a couple...love em

[mtgrizzlymn]

What motor would you guys recomend on 3s for what i want to do? Thaks guys

[xgerstandtx]

Run the castle mamba max pro with your same 18.5 motor. The mmp has websites and should work well. Don't forget the castle link also, you will never want orange again.

[Meatwad]

Originally Posted by Postclanker

Try a Mamba Max pro...it'll handle anything.
I ran Tekin for close to 30 years of on and off rc of all kinds...just recently tried a MM pro and now an a couple...love em

I'm glad to be part of the inspiration for trying it

Originally Posted by mtgrizzlymn

What motor would you guys recomend on 3s for what i want to do? Thaks guys

What doesn't your current motor do for you? At this point for raw power either the Holmes sensored outrunners or Tekin pro4 are the big boys in the game, in that order.

[mtgrizzlymn]

Sounds good i will do that.

[Postclanker]

[QUOTE=Meatwad;3684910]I'm glad to be part of the inspiration for trying it

You were indeed Mr. Wad

[mtgrizzlymn]

I like the motor its fine the speed control even comes on red light solid full throttle green reverse blink green just ho it is sopposed to work but motor does nothing tried another motor nothing either.

[Postclanker]

Sensor wire??? Rebind ?? Rcvr working ok ??
Grabbing at straws here....don't know much about the Goat

[mtgrizzlymn]

Ya tried another sensor wire just zero power to motor. Ran motor in goat 2ran fine tried same motor from goat3 on 2 and worked fine just cant understand all the lights working perfect just no power

[Charlie-III]

I've run/still run Novak in my 12th & 10th carpet cars and 10th dirt rigs and have been since the first ESC's came out.

For crawlers I use Castle Creation (various models) and Tekin FX-R's.
Anything can have an issue, but CC & Tekin work well for crawlers.

For a brushed/brushless ESC, I wouls suggest (as have others) a Castle Creations Mamba Max Pro.
-It runs a wide range of motors
-It handles a range of input power
-Great drag brake

Get a CC 10A BEC if your steering servo is over ~200inoz.
Get a CClink to program the ESC & BEC. Yes, you can program some of the ESC with your radio, but the CClink is easier & better.