09-17-2006, 05:26 PM | #1 |
Quarry Creeper Join Date: Feb 2004
Posts: 373
| IMEX Outrunner GOOD!
I picked up a IMEX Outrunner the other day ,and put it in my Maxx Crawler .Man this little motor has a ton of Power. after a Few packs threw it a got a Tire stuck and twisted a Maxx Shaft. Motor Specs. #5105 ,28x30,400, 760kv,1/8 shaft . Im running 2.2 mashers and a 11.1v Lipo . Last edited by Bigbadwhitey; 09-18-2006 at 11:10 PM. |
Sponsored Links | |
09-17-2006, 06:42 PM | #2 |
I wanna be Dave Join Date: Feb 2005 Location: Cleveland, OH
Posts: 8,009
|
Sweet! Got a link, or a price?
|
09-17-2006, 07:12 PM | #3 |
Quarry Creeper Join Date: Feb 2004
Posts: 373
|
I couldnt find a Link But the price was $49 at the LHS.
|
09-18-2006, 11:40 AM | #4 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
did it bolt right up?
|
09-18-2006, 11:46 AM | #5 |
I wanna be Dave Join Date: Apr 2006 Location: FLAGSTAFF
Posts: 3,728
|
funny thing its not listed on teir site even.......HHHHHHHMMMMMMMMMMMM?
|
09-18-2006, 01:07 PM | #6 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| How about photos, and/or part #'s Edit: I called Imex, and they told me they are not on the webesite. They listed 5106 as a 1290kv and 5105 as a 760kv JRH, sounds like a possible back up to the revolver....you should call them and check it out. Last edited by Fishmaxx; 09-18-2006 at 01:36 PM. |
09-18-2006, 11:09 PM | #7 |
Quarry Creeper Join Date: Feb 2004
Posts: 373
|
It didnt bolt right up just drill new holes or make a motor platr for it .I'll post some pics tommorrow. Yes it the 5105 .Oh ya it says DNZ on the Package also. so..Maybe IMEX is just selling them for DMZ
|
09-21-2006, 05:04 PM | #8 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,076
|
so.. what happened to the link for this motor?
|
09-22-2006, 11:46 AM | #9 |
Quarry Creeper Join Date: Feb 2004
Posts: 373
|
No Link . But heres the pic .Its monter to a T-maxx Tranny. |
| |