4ws crawler BEC question I've done a lot of reading on the bec subject and I have a question. Since I have 4ws do I need muiltuble BEC's? Or dose one cover all? |
Re: 4ws crawler BEC question The castle bec pro has dual output at 10 amps each. |
Re: 4ws crawler BEC question Quote:
I would recomend letting the ESC run the receiver and letting the BEC power just the servos. |
Re: 4ws crawler BEC question What servos are you using and what are you putting the 4ws on? That will also make a HUGE difference. |
Re: 4ws crawler BEC question They are Cirrus digital 180oz cheep all metal geared servos. Its a custom build Rock rider steel tube chassie,TLT axles with a Rc4wd 2 speed tranny, Tekin brushed RX Pro 35t system. Running RC4wd xlock 2.2 on GMade beadlocks. I do plan to upgrade the Bead locks and both steering servos. But for now I know I need a BEC. |
Re: 4ws crawler BEC question When I ran 4ws, with 400+ oz servos, I ran the CC BEC Pro and it worked great. |
Re: 4ws crawler BEC question i'd use a dedicated bec for each servo, or use the bigger castle bec for both. |
Re: 4ws crawler BEC question I ran 2 7954's the rx and a 645 winch with no problems on a CC BEC 10A set at 7.4v |
Re: 4ws crawler BEC question http://www.rccrawler.com/forum/elect...iple-becs.html http://www.rccrawler.com/forum/elect...c-bec-pro.html It's been covered in both these places..... And many more. "thumbsup" |
All times are GMT -6. The time now is 01:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com