RCCrawler Forums

Bogncrawl · 03-19-2014, 02:42 PM

So I'm about to wrap up this rig for the G6 in April and I've hit a wall. I've got a Dx3e with the sr300wp rx and I've got the light bar plugged into the bind plug for power. Servo obviously in the servo port. Esc in the esc port. Bec in the aux port, but I also have a heyok servo winch I need to plug into the aux port. So can I just make a Y connector for the bec and the servo winch and plug it into the port? I'm running a MMP and pro4 and hitec 7954 servo. And a gearhead trail torch led bar.

Helicopter Len · 03-19-2014, 04:12 PM

I would y link the bec and the light into the bind/battery port and leave the winch by itself in the aux.

Bogncrawl · 03-19-2014, 05:48 PM

Hmmm...

Bogncrawl · 03-20-2014, 03:13 AM

Anyone else....?

Awesome-Sauce RC · 03-20-2014, 03:22 AM

as suggested in post 2, it doesnt matter how you do it, y lead to any of the channels with the bec in one side and whatever was originally in that channel in the other. the voltage is gonna be the same regardless of where you plug it in as its all getting its power from the rx which is supplied by the bec

Bogncrawl · 03-20-2014, 06:31 AM

Alright thanks

03-19-2014, 02:42 PM	#1
Bogncrawl Rock Crawler Join Date: Jul 2012 Location: Grand rapids Posts: 770	Wiring dilemma! Need help! So I'm about to wrap up this rig for the G6 in April and I've hit a wall. I've got a Dx3e with the sr300wp rx and I've got the light bar plugged into the bind plug for power. Servo obviously in the servo port. Esc in the esc port. Bec in the aux port, but I also have a heyok servo winch I need to plug into the aux port. So can I just make a Y connector for the bec and the servo winch and plug it into the port? I'm running a MMP and pro4 and hitec 7954 servo. And a gearhead trail torch led bar.

03-19-2014, 05:48 PM	#3
Bogncrawl Rock Crawler Join Date: Jul 2012 Location: Grand rapids Posts: 770	Re: Wiring dilemma! Need help! Hmmm...

03-20-2014, 03:13 AM	#4
Bogncrawl Rock Crawler Join Date: Jul 2012 Location: Grand rapids Posts: 770	Re: Wiring dilemma! Need help! Anyone else....?

03-20-2014, 03:22 AM	#5
Awesome-Sauce RC Quarry Creeper Join Date: Nov 2013 Location: lethbridge,alberta, its mighty windy here!! Posts: 234	Re: Wiring dilemma! Need help! as suggested in post 2, it doesnt matter how you do it, y lead to any of the channels with the bec in one side and whatever was originally in that channel in the other. the voltage is gonna be the same regardless of where you plug it in as its all getting its power from the rx which is supplied by the bec

03-20-2014, 06:31 AM	#6
Bogncrawl Rock Crawler Join Date: Jul 2012 Location: Grand rapids Posts: 770	Re: Wiring dilemma! Need help! Alright thanks

03-19-2014, 04:12 PM	#2
Helicopter Len Pebble Pounder Join Date: Jun 2012 Location: Canby Posts: 194	I would y link the bec and the light into the bind/battery port and leave the winch by itself in the aux.

Wiring dilemma! Need help! - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Dilemma	aggieljh	Axial Wraith	11	11-15-2013 09:11 AM
Dilemma	Crypt Crawler	Team Losi Comp Crawler	9	05-10-2011 12:54 AM
Tonights dilemma	Harley	Chit Chat	59	02-25-2011 02:55 PM
bit of a dilemma	snowsurfer715	Axial SCX-10	2	08-29-2010 01:29 PM
My dilemma	kurt	Chit Chat	26	04-14-2008 09:22 AM

Sponsored Links

RCCrawler Forums

Thread: Wiring dilemma! Need help!