09-16-2015, 05:37 PM | #1 |
Quarry Creeper Join Date: Aug 2014 Location: Indy
Posts: 381
| dX4c steering problem.
I've noticed if I try to steer right left real fast the servo stalls. Does this with different servos. Is this a problem with the radio?
|
Sponsored Links | |
09-16-2015, 06:34 PM | #2 |
Quarry Creeper Join Date: Nov 2013 Location: alberta
Posts: 445
| Re: dX4c steering problem.
Is there an adjustment for speed on the radio menu i know on the 4s i can make adjustments to how fast the steering turns or perhaps you have to much amp draw are you using an external bec?
|
09-16-2015, 06:55 PM | #3 |
Quarry Creeper Join Date: Aug 2014 Location: Indy
Posts: 381
| Re: dX4c steering problem.
Yeah I'm running a cc bec and 7990th. It's fine crawling but just goofing off I noticed it stops if I turn it back and forth real fast. Tbh this is my first spectrum and I'm not all that impressed.
|
09-16-2015, 08:04 PM | #4 |
Quarry Creeper Join Date: Nov 2013 Location: alberta
Posts: 445
| Re: dX4c steering problem.
Have you tried feeding the servo directly from the bec and the reciever from the esc i have a dx3c and dx4s and havent had an issue in the two years ive owned them but have been hearing alot about issues with the new avc capable spektrum radios
|
09-17-2015, 01:23 AM | #5 |
Quarry Creeper Join Date: Oct 2012 Location: Canada
Posts: 267
| Re: dX4c steering problem.
When it happens, you should see the orange light on the RX go off... if it's the case, you have a power problem to the RX/Servo/BEC... You could use a glitch buster capacitor on the RX, or power the RX independently from the ESC and the servo by the BEC. |
09-18-2015, 10:08 PM | #6 |
Newbie Join Date: Aug 2015 Location: Left Coast
Posts: 1
| Re: dX4c steering problem.
Sounds like the avc is doing it's job and trying to correct for what it sees as overcontroling.
|
09-18-2015, 11:18 PM | #7 |
Rock Crawler Join Date: Nov 2014 Location: Grimcity, On
Posts: 571
| Re: dX4c steering problem.
Ya I agree it could be avc, but only if you haven't disabled it. Sent from my Nexus 5 using Tapatalk |
09-19-2015, 06:00 AM | #8 |
Quarry Creeper Join Date: Aug 2014 Location: Indy
Posts: 381
| Re: dX4c steering problem.
I don't have an avc rx.
|
09-20-2015, 04:24 AM | #9 |
Quarry Creeper Join Date: May 2013 Location: Knoxville
Posts: 466
| Re: dX4c steering problem.
Sounds like a power issue to me. Power the servo directly with the bec and use the esc internal bec to power the receiver.
|
09-23-2015, 12:53 PM | #10 |
Newbie Join Date: Apr 2015 Location: Greater Seattle Area
Posts: 8
| Re: dX4c steering problem.
Let me guess your receiver is a SRS4210. This has AVC enabled which can not be disabled. Pick up a SR410 or SR210. Your steering problems will go away, at least they did for me.
|
09-23-2015, 01:21 PM | #11 |
Quarry Creeper Join Date: Aug 2014 Location: Indy
Posts: 381
| Re: dX4c steering problem. |
dX4c steering problem. - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Warn winch problem dx4c axial wraith | CrawlCrest | Electronics | 13 | 09-18-2015 05:56 AM |
Spektrum dx4c problem | Dajeepman | Electronics | 3 | 03-28-2015 01:43 PM |
Spectrum dx4c steering problem | millfab313 | Electronics | 3 | 02-25-2015 06:31 PM |
SCX 10, Steering problem... more steering one way than the other? | C_Money | Axial SCX-10 | 7 | 12-28-2009 04:54 PM |
steering problem.... steering is stuck all the way right | lukem80 | General Crawlers | 10 | 12-14-2006 11:30 AM |
| |