SkyRC T6755 charger - DC plug

[HydeQc]

I have a T6755 charger but I can't find a proper DC plug that will fit with it. As seen in the top right corner of this picture:

http://www.skyrc.com/image/data/980px_en/T6755/4.jpg

I've tried 2 of my local RC shops... And writing to SkyRC directly. No success.

Web store: no luck so far.

Thanks!

[svt923]

The DC connector is just an XT-60 plug, you can get them from just about anywhere and they are dirt cheap. The whole DC adapter wire can be made with a male XT-60 plug, 4 mm bullet plugs, some 12-14 gauge wire, and basic soldering skills.

You can also get a premade plug for a few dollars if your feeling lazy.

15cm XT 60 To 4.0 Banana Plug Balance Charge Cable For Rc Helicopter AD | eBay

[nightcrawler48]

I think you are looking for a cable to connect to the charger and the other end to connect to a 12V car battery so you can field charge when no AC outlet availale. Right? The cable shown here is from a Hitec charger and looks like it is a match for your charger. The connector to the charger on this cable is a male XT-60.

As mentioned by svt923 you could get a XT-60 male plug, a couple of battery clips, and some wire and solder your own, or, probably cheap enough to just buy if so inclined.

[HydeQc]

Thanks!!!!

Now that I know it's a XT-60 connector it will be easy ton make one!

I love this forum! :-)