Confuzzling LED setup

[nedmo]

Hi there,

I am getting all the bits together to put together my rigs lighting system and have come to the fun part how I am going to control it all!

i was hoping you could help me out with my planned lighting setup.

I have seen the HeyOk controller and also want to use there KOH rear lights. https://www.freewebstore.org/heyok-p..._15352965.aspx

Please see a rough schematic of the layout and functionality required.


The four very rear lights are angel eye style as seen here. 2Leds 5mm Yellow+Red Angel & Demon Eyes LED Headlight Back Light for 1/10 RC Car | eBay

I would like to be able to have the following controls.

F1 - All off
F2 - Upper and lower brake lights functioning on trigger neutral and reverse functionality on reverse with hazards after x time of inactivity.
F3 - Headlight and rear Running light on with all F2 functions active
F4 - KOH amber and blue flashing with all F3 functions active
F5 - Driving lights on with F4 functions active

My setup is running 2s lipo, with a CC 2.0 BEC and a hacked Flysky Gt3b with a 6ch rx.

Any help would be appreciated.

Ned

[BAD RC]

Check out Open Source Lights.


https://www.rcgroups.com/forums/show...ght-Controller

Sent from Mars.

[magic_yeti]

U can contact heyok here over the forum. very nice guy which can set u up with a light controller, he also makes custom ones

[nedmo]

Yeah he was my first port of call. Already let me know he will take a look tomorrow.

Sent from my Pixel using Tapatalk