Info SANWA MX-V 3 channels

[slimfire]

Hi

I am buying a Sanwa MX-V 3 ch for my son, anybody can tell me if the 3rd channel is a 2 or 3 position switch? or is it a proportional channel?

I would like to use the 3rd channel to operate the Winch.

Thanks for any feedback/info!

[Voodoobrew]

High Side: Refers to the position of Auxiliary channel 3 servo movement (pushing the Auxiliary Lever up).

Low Side: Refers to the position of Auxiliary channel 3 servo movement (pushing the Auxiliary Lever down).

Found these lines in the manual suggesting it is 3 position.

But I would get Spektrum RC DX5C 5-Channel DSMR Surface Radio w/SRS6000 Receiver, for $130 myself
or many people like the cheap flysky transmitters

[slimfire]

Originally Posted by Voodoobrew

Found these lines in the manual suggesting it is 3 position.

But I would get Spektrum RC DX5C 5-Channel DSMR Surface Radio w/SRS6000 Receiver, for $130 myself
or many people like the cheap flysky transmitters

Thanks Voodoobrew
I spotted that info though I was not 100% sure about the meaning of it..

The Spektrum RC DX5C looks really interesting and good quality for the price, though I have several SANWA transmitters and even more receivers thus I decided to go for the cheap MX-V for my 6 year old son....who's still treating the radio as a "toy"...

Thanks for your feedback!

[Voodoobrew]

if thats the case, the stock axial ttx300 is 3ch,

MULTI-POSITION: The TTX300 3rd channel can be programmed to function as 2 position, 3 position, 4 position or proportional control switch.Selecting each position and end points for each position are performedsimultaneously. The default position of CH3 is 2 position. To change thefunction of CH3, follow these steps:

and you can find them for like $20 usesd / practiacly new on eBay.
Other then the lack of features I really like my tactic ttx300 and the origional alkaline batteries worked for over a year.
Nothing aganst the remote you chose other than price vs features.

[slimfire]

That’s a good option !

You are right!

Thanks!