Binding my STX2 (axial yeti jr) to my AR-3 receiver (axial scx10)

[DjZ0rKy]

Hi guys, i need to bind my STX2 from my axial yeti jr RTR to my old axial SCX10 first gen. But i can't seem to be able...

Is there any steps that i'm missing or it's just impossible to do?

- I put my ar3 in binding mode
- I push right my transmiter when powering on

But the light on the transmitter don't stop flashing...

Thanks

[Ninomaniac]

That's not gonna work. Not even the same brand, let alone same protocol.

[DjZ0rKy]

Which transmitter will work with the AR-3 receiver? Thanks

[ferp420]

Originally Posted by DjZ0rKy

Which transmitter will work with the AR-3 receiver? Thanks

the ax2 was origanaly paired to it but almost any older flysky will pair the most commin is the flysky gt series the gt2 the gt3 gt3b gt3c

the older redcat rtr radios were also fly sky

the newer fkysky radios i think use different protocalls and wont pair with the older recivers

[DjZ0rKy]

Originally Posted by ferp420

the ax2 was origanaly paired to it but almost any older flysky will pair the most commin is the flysky gt series the gt2 the gt3 gt3b gt3c

the older redcat rtr radios were also fly sky

the newer fkysky radios i think use different protocalls and wont pair with the older recivers

So the best option is to change the Transmitter and the receiver righ? ;)

[DjZ0rKy]

Just ordered a DX5C SMART 5CH DSMR TX W/6100AT

need to move on ;)