|
| LinkBack | Thread Tools | Display Modes |
04-20-2023, 12:04 PM | #1 |
Quarry Creeper Join Date: Nov 2011 Location: Thunder Bay, Ontario
Posts: 329
| Replacement motor advice needed for my XR10
Hey everyone, I could use some motor advice. I’m not all that knowledgeable when it comes down to the electronics despite being in RC hobbies a long time with all kinds of vehicles in the air and on the ground. Generally lean on my friends for advice on what to get. Many moons ago I built an XR10… here's the actual build thread from that if you're interested... Mysterious' Switch Slow build thread I've used it sparingly over the last decade but one of the motors just pooched on me. It gets hot and won’t go til you give it of a bump. My friend broke it down and checked it out and he said it needs replacing. So I'm looking at buying a new matched pair of motors to install. When I originally built this I put on Team Brood Apocalypse with these components.... Apocalypse Options: Wind and Armature: 45 Turn Type SR (+$10.00) Armature Upgrades: Dye Balance: Drill (Standard) Comm Size: 7.5mm (Small) Brush Configuration: Laydown (Standard) Brush: Stock Springs: Purple 9oz Heavy (Standard) Lightweight: Stock Bearings: Steel ABEC 7 Bearings Matched: Yes (Quanity Must Be Two) Timing: 6 Rotation: Normal Vehicle: XR10 So I was thinking about either getting another set of Apocalypse with the same components (even though you can only indicate the wind, timing, and rotation now): https://teambrood.net/product/apocalypse/ OR… A friend of mine suggested I look at Holmes hobbies... and I came across these TORQUEMASTER PRO 540 45T motors which look comparable. https://holmeshobbies.com/motors/bru...o-540-45t.html Which set would you guys suggest is better? Or do you have an alternate that you would suggest? I crawl for fun not in competition, though as you can tell I spent a lot on building this crawler cause I wanted something that was very capable so I'm looking to put quality motors. I run 3S & want to stick with 45T FYI. Thanks in advance for any replies. |
Sponsored Links | |
Replacement motor advice needed for my XR10 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Getting cold feet... ESC+Motor advice needed | Reyhn | Axial SCX10 II | 13 | 09-20-2016 01:28 PM |
Replacement Servo Advice | My(2)Cents | Axial Wraith | 7 | 06-29-2013 03:29 PM |
Holmes Motor for XR10 - need advice | bikeboy | Axial XR10 | 13 | 02-15-2011 11:44 AM |
Advice needed for xr10 build | dusty sweep | Axial XR10 | 27 | 10-16-2010 05:30 AM |
nitro motor stupidity - advice needed... | Big Mike | Chit Chat | 22 | 10-01-2007 03:38 PM |
| |