RCCrawler.com Bulletin Board

DISTURBIN' tha PEACE · 06-09-2008, 08:27 PM

After driving sprint80's OCM last month & driving better with his rig than I do with my own, I knew I had to get one of these. It came in last week, just in time for HRCC's Summer Series comp#1. My original plan was to use my Hustler chassis that has been sitting since getting PC'ed. Well didn't have the time to go get it from the Rydefab shop. So, I tore apart my VF Slingshot w/axials. The berg axles were nearly a direct fit. The only thing I needed to do was to replace the front lower rod ends fron Revo's to Jato's That clocked the front axle back down to give me the proper castor. The rear axle ended up being perfectly clocked to get the motor up & out of the way. It sits at a perfect 12.5wb & a RCH over 3"gc all the way from behind the front tires to in front of the rears.

Axles- enRoute Berg 2.2
Chassis- VF_Slingshot_w/HC_links
Shocks- Losi .6 buggy shocks
1x Cups&ends
4x Ti-niride_shafts
2x Threaded_body
4x Cartridge
1x Shock_pistons
1x 80wt_oil
Springs- Front_red/Rear_black
Battery- 3c Lipo
Motors- 55t lathes for now
ESC- Tekin_FXR
V. regulator- CC_BEC
Steering servo- Hitech_5995tg
Dig servo- Hitech_5245mg
Radio- Spektrum_DX3R
Rims- VF_Stalkers comming soon
Tires- Panther Cougars
Body- Losi_Grappler

Misc.
Revo_rod_ends
Jato_rod_ends

Here's some comp action shots bringing home the gold.

redbaron · 06-09-2008, 08:55 PM

Nice! What did you think of the width with the Berg wheels? Did it give you any troubles with getting thru gates?

dezfan · 06-09-2008, 09:29 PM

Not bad Sheldon, not bad at all!

The wheels are ugly, but the colors were perfect.

yotachump · 06-09-2008, 09:51 PM

Looks good.

Those rock have to much traction

I will have to agree with dezfan on this part

Quote:

Originally Posted by dezfan

The wheels are ugly, but the colors were perfect.

Browncoat · 06-09-2008, 10:13 PM

All your hyperlinks are FUBAR. Looks like you have too many [url] tags.

chrisjlittle · 06-09-2008, 10:16 PM

So...is that a turd bergler?

Nice truck

Thanks for the P/N's for the losi shocks.

JohnRobHolmes · 06-09-2008, 10:16 PM

Sheldon!

Nice rig man, and the lid is awesome

DISTURBIN' tha PEACE · 06-10-2008, 01:43 AM

Quote:

Originally Posted by redbaron

Nice! What did you think of the width with the Berg wheels? Did it give you any troubles with getting thru gates?

Thanks, the width was fine. No problems yesteday, I did hit 1 gate but it was not because of the width. Many had trouble at that gate.

Quote:

Originally Posted by dezfan

Not bad Sheldon, not bad at all!

The wheels are ugly, but the colors were perfect.

Thanks Dez. If it were not for the gold, they'd be still in the box th the rest of the stock stuff.

Quote:

Originally Posted by yotachump

Looks good.

Those rock have to much traction

I will have to agree with dezfan on this part

That spot is a traction nightmare, way too much.

Quote:

Originally Posted by Browncoat

All your hyperlinks are FUBAR. Looks like you have too many [url] tags.

Fixed em.

Quote:

Originally Posted by chrisjlittle

So...is that a turd bergler?

Nice truck

Thanks for the P/N's for the losi shocks.

Thanks.

Quote:

Originally Posted by JohnRobHolmes

Sheldon!

Nice rig man, and the lid is awesome

Thanks JohnRob.

ADDICT · 06-10-2008, 03:01 AM

i like it! im seeing more of these berged based 2.2 more and more. Looks like a future project for me. Nice pics aswell, look like you can get a lot of traction on those rocks. Where the hell did they get those red and blue tennis markers at? great job on the build.

Sprint 80 · 06-10-2008, 03:13 AM

Nice rig in such a short build time!!! But, I wouldn't expect anything less from you. Great job at Sunday's comp. You drove that rig like you were driving that rig all season.

I guess the Bergler stole the Gold!

rn38 · 06-10-2008, 03:31 AM

Yeah congrats again!! Sweet rig these are the future huh. Iv'e been looking at these since they were released. Well I guess I just can't wait

. shhhh

eric113 · 06-10-2008, 07:16 AM

Dtp,

So the .6's would be equal to 3.5'' shock ?

DISTURBIN' tha PEACE · 06-10-2008, 02:23 PM

Quote:

Originally Posted by rtooyak

i like it! im seeing more of these berged based 2.2 more and more. Looks like a future project for me. Nice pics aswell, look like you can get a lot of traction on those rocks. Where the hell did they get those red and blue tennis markers at? great job on the build.

Thanks, the blue & red balls are from walmart. They are called "fun balls"

Quote:

Originally Posted by Sprint 80

Nice rig in such a short build time!!! But, I wouldn't expect anything less from you. Great job at Sunday's comp. You drove that rig like you were driving that rig all season.

I guess the Bergler stole the Gold!

Thanks Alan, I do have a little clod experience, that helps.

Taking home the gold, baby!!

Quote:

Originally Posted by rn38

Yeah congrats again!! Sweet rig these are the future huh. Iv'e been looking at these since they were released. Well I guess I just can't wait

. shhhh

Thanks MIke. If you ain't got one, you'll be left behind.

Quote:

Originally Posted by eric113

Dtp,

So the .6's would be equal to 3.5'' shock ?

I believe so. Front buggy shocks. I'll check at home tonight.

kalani · 06-10-2008, 05:28 PM

So your running two 55t's off of one FX-R? Can handle? If I don't need to, I would just want to run one FX-R. I am thinking of getting this rig, looks very good. Any off body pics? Mahalos.

rn38 · 06-11-2008, 03:38 PM

guess I wont get left behind hehehe sssshhh!

RydeFab · 06-11-2008, 11:58 PM

nice sheldon, i don't know how i missed your build thread. i love the way it looks and crawls. i'm pretty sure there will be alot more of these in the near future in the club. i, for one am impressed on how it did. now i gotta hit some "part times" to finance on getting a set of those.

nice job on sunday sheldon, awesome looking rig

.

crawlercrazed · 06-12-2008, 07:42 PM

i love this truck . ive been doin alot of reading n i desided to buy one when i get my stimulus check . prolly just the axles, mayhem wheels, and a vf chassis or a gc2. what shocks is everyone running?? stock , losi??? what bout tires??

dezfan · 06-12-2008, 07:55 PM

Sheldon, you need to get your avatar made into a decal and run it on the hood, it's hilarious!

DISTURBIN' tha PEACE · 06-13-2008, 05:09 PM

Quote:

Originally Posted by kalani

So your running two 55t's off of one FX-R? Can handle? If I don't need to, I would just want to run one FX-R. I am thinking of getting this rig, looks very good. Any off body pics? Mahalos.

Thanks Kalani.
Yup it can handle.

Quote:

Originally Posted by rn38

guess I wont get left behind hehehe sssshhh!

Not if you have one of these.

Quote:

Originally Posted by RydeFab

nice sheldon, i don't know how i missed your build thread. i love the way it looks and crawls. i'm pretty sure there will be alot more of these in the near future in the club. i, for one am impressed on how it did. now i gotta hit some "part times" to finance on getting a set of those.

nice job on sunday sheldon, awesome looking rig

.

Thanks bro.

Quote:

Originally Posted by crawlercrazed

i love this truck . ive been doin alot of reading n i desided to buy one when i get my stimulus check . prolly just the axles, mayhem wheels, and a vf chassis or a gc2. what shocks is everyone running?? stock , losi??? what bout tires??

Did you even read? It's all listed in the first post.

Quote:

Originally Posted by dezfan

Sheldon, you need to get your avatar made into a decal and run it on the hood, it's hilarious!

I think I might.

Tanis · 06-13-2008, 05:51 PM

Quote:

Originally Posted by eric113

Dtp,

So the .6's would be equal to 3.5'' shock ?

.6's are about 3". The .9's are about 3.5"

06-09-2008, 08:55 PM	#2
redbaron Team Nylint Join Date: Jul 2006 Location: Elberfeld Posts: 2,055	Nice! What did you think of the width with the Berg wheels? Did it give you any troubles with getting thru gates? Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-09-2008, 09:29 PM	#3
dezfan OCCUPY RCC! Join Date: Dec 2005 Location: I am the 53%. Posts: 11,305	Not bad Sheldon, not bad at all! The wheels are ugly, but the colors were perfect. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-09-2008, 10:13 PM	#5
Browncoat Pebble Pounder Join Date: Mar 2007 Location: Delaware, OH Posts: 186	All your hyperlinks are FUBAR. Looks like you have too many [url] tags. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-09-2008, 10:16 PM	#6
chrisjlittle RCC Addict Join Date: Nov 2007 Location: Scalers are more fun Posts: 1,175	So...is that a turd bergler? Nice truck Thanks for the P/N's for the losi shocks. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-09-2008, 10:16 PM	#7
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 14,854	Sheldon! Nice rig man, and the lid is awesome Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-09-2008, 08:27 PM	#1
DISTURBIN' tha PEACE Gold Star Baby! Join Date: Jun 2005 Location: In Kahoots!!!!! Posts: 4,761	The Bergler After driving sprint80's OCM last month & driving better with his rig than I do with my own, I knew I had to get one of these. It came in last week, just in time for HRCC's Summer Series comp#1. My original plan was to use my Hustler chassis that has been sitting since getting PC'ed. Well didn't have the time to go get it from the Rydefab shop. So, I tore apart my VF Slingshot w/axials. The berg axles were nearly a direct fit. The only thing I needed to do was to replace the front lower rod ends fron Revo's to Jato's That clocked the front axle back down to give me the proper castor. The rear axle ended up being perfectly clocked to get the motor up & out of the way. It sits at a perfect 12.5wb & a RCH over 3"gc all the way from behind the front tires to in front of the rears. Axles- enRoute Berg 2.2 Chassis- VF_Slingshot_w/HC_links Shocks- Losi .6 buggy shocks 1x Cups&ends 4x Ti-niride_shafts 2x Threaded_body 4x Cartridge 1x Shock_pistons 1x 80wt_oil Springs- Front_red/Rear_black Battery- 3c Lipo Motors- 55t lathes for now ESC- Tekin_FXR V. regulator- CC_BEC Steering servo- Hitech_5995tg Dig servo- Hitech_5245mg Radio- Spektrum_DX3R Rims- VF_Stalkers comming soon Tires- Panther Cougars Body- Losi_Grappler Misc. Revo_rod_ends Jato_rod_ends Here's some comp action shots bringing home the gold. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook Last edited by DISTURBIN' tha PEACE; 06-10-2008 at 01:33 AM.

06-10-2008, 03:01 AM	#9
ADDICT Rock Crawler Join Date: May 2008 Location: ************************ Why crawl, when you can just jump up there?! Posts: 995	i like it! im seeing more of these berged based 2.2 more and more. Looks like a future project for me. Nice pics aswell, look like you can get a lot of traction on those rocks. Where the hell did they get those red and blue tennis markers at? great job on the build. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-10-2008, 03:13 AM	#10
Sprint 80 Quarry Creeper Join Date: Jun 2007 Location: Waipahu Posts: 438	Nice rig in such a short build time!!! But, I wouldn't expect anything less from you. Great job at Sunday's comp. You drove that rig like you were driving that rig all season. I guess the Bergler stole the Gold! Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-10-2008, 03:31 AM	#11
rn38 Quarry Creeper Join Date: May 2007 Location: Hilo Posts: 446	Yeah congrats again!! Sweet rig these are the future huh. Iv'e been looking at these since they were released. Well I guess I just can't wait. shhhh Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-10-2008, 07:16 AM	#12
eric113 Power of the Portals Join Date: Feb 2004 Location: where ever the wind fawkin blows me, tx Posts: 4,573	Dtp, So the .6's would be equal to 3.5'' shock ? Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-10-2008, 05:28 PM	#14
kalani Pebble Pounder Join Date: Jul 2005 Location: Kahului Posts: 127	So your running two 55t's off of one FX-R? Can handle? If I don't need to, I would just want to run one FX-R. I am thinking of getting this rig, looks very good. Any off body pics? Mahalos. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-11-2008, 03:38 PM	#15
rn38 Quarry Creeper Join Date: May 2007 Location: Hilo Posts: 446	guess I wont get left behind hehehe sssshhh! Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-11-2008, 11:58 PM	#16
RydeFab Rock Crawler Join Date: Aug 2006 Location: sleeping in my truck! Posts: 683	nice sheldon, i don't know how i missed your build thread. i love the way it looks and crawls. i'm pretty sure there will be alot more of these in the near future in the club. i, for one am impressed on how it did. now i gotta hit some "part times" to finance on getting a set of those. nice job on sunday sheldon, awesome looking rig . Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-12-2008, 07:42 PM	#17
crawlercrazed Rock Stacker Join Date: Dec 2007 Location: in the "D" Posts: 72	i love this truck . ive been doin alot of reading n i desided to buy one when i get my stimulus check . prolly just the axles, mayhem wheels, and a vf chassis or a gc2. what shocks is everyone running?? stock , losi??? what bout tires?? Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

06-12-2008, 07:55 PM	#18
dezfan OCCUPY RCC! Join Date: Dec 2005 Location: I am the 53%. Posts: 11,305	Sheldon, you need to get your avatar made into a decal and run it on the hood, it's hilarious! Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

Sponsored Links

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler.com Bulletin Board

Thread: The Bergler