08-12-2009, 09:49 AM | #1 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| Super 300 CVD's All the parts are in, and the packaging has begun. Shipments should start arriving at vendors next week Here is what showed up at my door step on Monday! The tolerances were very tight, so it took about 5 mins to assemble Warning: Picture was taken for entertainment purposes only! The accuracy of this measurement is very questionable Trying to hold it level, straight, and taking a picture with a few beers in me was very challenging. Got them installed, and its obvious I am going to need some high steer/clearance knuckles to take full advantage on these bad boys! Super 300 Berg CVD's are virtually indestructible berg cvd's, and made from the highest quality materials. Designed to be as strong as possible yet allowing 50.5 degrees of steering angle. Super 300 Specs: Heat treated 300m chromoly, 6mm diameter shafts with a 5mm thread on the stubs, and improved locker engagement. Includes: 2 300m Inner shafts 2 300m Outer shafts 2 3/32 cross pins 4 Bearings and installation instructions. Required: Stock berg knuckles. AX10 knuckles will not fit. Factory 12mm wheel hexes need to be modified to 6mm ID. PRE-ORDER Link at TCScrawlers.com Last edited by Fishmaxx; 08-12-2009 at 10:05 AM. |
Sponsored Links | |
08-12-2009, 09:54 AM | #2 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
|
I can't wait |
08-12-2009, 10:01 AM | #3 |
I wanna be Dave Join Date: Feb 2006 Location: Campbell, CA 4 hrs 2Rubicon !
Posts: 2,044
|
ahh So where does one get them ? ? ? ? ? ? ? ? ?
|
08-12-2009, 10:01 AM | #4 |
I wanna be Dave Join Date: Dec 2008 Location: ?
Posts: 5,055
|
How do you limit them to 45% so I don't crake the pin:?
|
08-12-2009, 10:04 AM | #5 | |
I wanna be Dave Join Date: Feb 2005 Location: Burnsville
Posts: 3,096
| The Crawler Store Quote: Last edited by SVEN; 08-12-2009 at 10:10 AM. | |
08-12-2009, 10:11 AM | #6 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| |
08-12-2009, 10:16 AM | #7 |
I wanna be Dave Join Date: Dec 2008 Location: ?
Posts: 5,055
|
thanks I had a pair in my axial these weekend. I cracked the pin in about 5 min.:? I didn't mess with the epa I just put them in and said dam this things got steering |
08-12-2009, 10:16 AM | #8 |
I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
|
Awesome!!
|
08-12-2009, 10:37 AM | #9 |
I wanna be Dave Join Date: Aug 2007 Location: JERSEY BOONDOCKS
Posts: 3,360
|
If they are pre-ordered now, will we have them before Worlds? I don't wana drop $130 before the comp if they arent gonna show till after. |
08-12-2009, 10:46 AM | #10 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| |
08-12-2009, 12:04 PM | #11 |
ghetto fabulous newbie Join Date: Sep 2007 Location: with your mom
Posts: 2,526
|
So are you ever planning on doing a axial knuckle version?
|
08-12-2009, 12:16 PM | #12 |
Rock Crawler Join Date: Feb 2009 Location: On the "ROCKS"
Posts: 571
| .
Sign me up!!!! I need some. |
08-12-2009, 12:27 PM | #13 |
Pebble Pounder Join Date: May 2005 Location: Dallas/Ft Worth Texas
Posts: 129
| You didn't have a pair of these in your Axial. These are for Berg axles only. They will not fit in an Axial.
|
08-12-2009, 03:38 PM | #14 |
Quarry Creeper Join Date: Jun 2008 Location: Honolulu
Posts: 421
| |
08-12-2009, 04:47 PM | #15 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| |
08-12-2009, 06:12 PM | #16 |
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
| |
08-12-2009, 07:24 PM | #17 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
|
what high clearance knuckle is that in the picture above......
|
08-12-2009, 07:25 PM | #18 | ||
Rock Crawler Join Date: Dec 2008 Location: dallas
Posts: 968
| Quote:
Quote:
while we are working on the axial version, Spad is right u didnt have super 300's. the axial version will probably be supplied with a new locker that will hold up to the task of almost bombproof axles. there will be a tester set at worlds in an axial!! u wont break the cvd pin in these. | ||
08-12-2009, 07:27 PM | #19 |
I wanna be Dave Join Date: Jan 2004 Location: Detroit
Posts: 3,583
| |
08-12-2009, 07:46 PM | #20 |
Rock Crawler Join Date: Dec 2008 Location: dallas
Posts: 968
| |
| |