01-31-2010, 11:56 AM | #1 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
| My new Berg Tracer 2.2
I still have a lot of things to work on and tweak, but heres a sneak peek. Berg Tracer 2.2 Tekin 55t pro hand wound x 2 Tekin FXR Punk dig Castle bec Spectrum SR3100 DX3R Spectrum JR z9100t servo 3s lipo Vanquish rims Rovers soft CKRC's Heavy Duty Baja Bug Body Lower links-homemade steering link-homemade chassis skid plate-homemade Things I did not like about the Tracer kit. Screws-junk rod ends-fixable link rods-fixable The stuff I didn't already have, I ordered from. TCS crawlers Punk RC CKRC crawlers A Main Hobbies All did a great job of getting me my stuff! Last edited by Grump; 02-01-2010 at 06:39 PM. |
Sponsored Links | |
01-31-2010, 08:06 PM | #2 |
Newbie Join Date: Jul 2008 Location: united kingdom
Posts: 7
|
looks well, how does it compare to the original berg
|
02-03-2010, 10:35 AM | #3 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
|
I don't know how it compares to the original Berg from a first hand perspective. I never had the original Berg. I can say the more I tweak, work, and drive this thing. The more I like it. Hopefully I can get it on some rocks this weekend. At this point I think the only thing left that will take a lot of work to fix is my "driving" I have taken it through the living room a couple of times and have not broke anything on it yet. That alone has beat my previous record of almost making it through the living room with my AX10. |
02-03-2010, 10:47 AM | #4 |
I wanna be Dave Join Date: Dec 2008 Location: ?
Posts: 5,055
|
please bring it to the comp this weekend. Ill break it for ya. |
02-03-2010, 11:04 AM | #5 |
Rock Crawler Join Date: Oct 2008 Location: Florida
Posts: 527
|
Looking forward to hearing how it works for you on the rocks! I have had my v2 axles for a little over a month now and I realy like them. If you havnt done it already you should locktight the screws that hold the axle tube inside the case because after my first serious run on the rocks all of my tubes were loose and one screw backed off enough to rub the gear. and check the cvd grubs after every run. Mine have bean holding once I cleaned them with brake cleaner and lock tighted them in. The stearing looks good as well as the truck |
02-03-2010, 11:41 AM | #6 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
|
saydee1800 I hope to bring it this weekend. I am still trying to make some skids for the front and rear axles. They seem to be in short supply for purchase:-(. goodoldlevi Thanks for the heads up on the locktight. I was going to do it and forgot. |
02-03-2010, 11:55 AM | #7 |
I wanna be Dave Join Date: Dec 2008 Location: ?
Posts: 5,055
| |
02-03-2010, 01:06 PM | #8 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
| |
02-03-2010, 01:11 PM | #9 |
I wanna be Dave Join Date: Dec 2008 Location: ?
Posts: 5,055
|
Even if it not running just bring it along. I have been wanting to check one of these out.
|
02-03-2010, 01:40 PM | #10 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
| |
02-05-2010, 04:58 PM | #11 |
Newbie Join Date: Jan 2009 Location: chattanooga
Posts: 26
|
how about posting some better pictures of youre lower links
|
02-05-2010, 06:05 PM | #12 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
| |
02-05-2010, 06:37 PM | #13 |
Newbie Join Date: Jan 2009 Location: chattanooga
Posts: 26
|
did you make those with flat delrin sheets if so how thick
|
02-06-2010, 02:59 AM | #14 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
| |
02-06-2010, 06:49 AM | #15 |
Newbie Join Date: Jan 2009 Location: chattanooga
Posts: 26
|
thanks for the info
|
02-06-2010, 09:26 AM | #16 |
I wanna be Dave Join Date: Feb 2009 Location: 20 miles southeeast of downtown Sacramento
Posts: 2,373
| |
02-06-2010, 04:31 PM | #17 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
| It climbed like a mountain goat I still need to do some tweeking to the suspension, maybe tighten up the springs on the shocks a little. I was very very happy with it. |
02-09-2010, 05:58 PM | #18 |
Pebble Pounder Join Date: Dec 2006 Location: da big island, HI
Posts: 191
|
nice job on the lower links |
02-25-2010, 05:44 PM | #19 |
Quarry Creeper Join Date: Dec 2008 Location: Fraggle Rock
Posts: 302
|
I now have my new body on this rig. BUG'N |
03-01-2010, 01:09 PM | #20 |
Quarry Creeper Join Date: Jan 2010 Location: Pennington NJ
Posts: 315
|
Have you had any more time on the rocks with it? Curious to see what the ongoing experience is. Have any more changes/upgrades planned?
|
| |