RCCrawler Forums

Aussie Nerd · 01-09-2011, 10:43 PM

I thought as such, but just wondered anyway.

Thanks

Kieren

kineteks · 01-10-2011, 11:13 AM

...any word yet on how close "we" are to being able to start a production run? Not that I'm anxious to get my paws on a set of these axles or anything

SDS Customz · 01-12-2011, 09:29 AM

Quote:

Originally Posted by kineteks

...any word yet on how close "we" are to being able to start a production run? Not that I'm anxious to get my paws on a set of these axles or anything

Ive been really busy with work and some family stuff the last 5-6 days, I'm trying to get the all of the pms returned though I havent caught up as of yet. I will post an update shortly

Aussie Nerd · 01-13-2011, 05:01 AM

Just for reference could someone please clarify the diameter of the gear pins. There are two diameters listed as spare parts on TCS, either 1.5mm or 2mm. It might help myself and other's in purchasing the parts needed to complete the axles. Oh and also the bearings sizes inside the case's. I know the locker bearings are 10x15, but are the 3rd and 2nd gear bearings 5x10 or 5x11? And finally anyone have a source for the 3x4mm coutersink screws? I got my last lot from tcs, but they don't seem to be stocking them any longer

Thanks

Kieren

mattin · 01-13-2011, 06:50 AM

Hey,
the bearrings in the case are 5x10, the gearpins 1,5mm.

greetings

Martin

SDS Customz · 01-13-2011, 09:37 AM

Mcmastercarr, they have lots of screws

Aussie Nerd · 01-13-2011, 04:55 PM

Thanks to both

Kieren

SDS Customz · 01-14-2011, 11:28 PM

You are welcome sir.

phllint · 01-24-2011, 10:51 AM

Iam in for an aluminum set. Where do I send the money to what PayPal acct? Its ready for you to have. Thanks a lot for a perfect set of axles long awaited and much needed for perfection

phllint · 01-24-2011, 12:21 PM

Anybody have a phone # for sds customs. My phone crapped out and I lost all my numbers.

RickM · 01-24-2011, 02:20 PM

I dont have his number but I am pretty sure he was on the entry list for a pretty large comp this weekend in Arizona. I am guessing he is traveling today so you might just want to give him a chance to catch his breath and get back in. At least that is what I am doing as I am anxious to get some 300's from him!!

SDS Customz · 01-29-2011, 10:17 PM

I have recieved payments from the following thus far, I know that several payments are on the way, though these are the ones that I have in hand.

Al/Ti-Fighters-

Harley

Woody

Crawler Innovations(customer)

Kinetics

86Jeep (Super)

Phllint

TI-Fighters

House

Marogg

Jon Leno

TCTZ28

Aussie Nerd · 01-29-2011, 10:32 PM

I'll still be a month or two out but I'm definitely getting a set

Kieren

SDS Customz · 01-29-2011, 10:41 PM

several guys are having to wait till there taxes get back or mid to end of Feb.

Aussie Nerd · 01-30-2011, 12:50 AM

I'm just waiting for more money

Kieren

Aggie01 · 01-30-2011, 09:05 AM

I'll keep buying my lottery tickets.

Ty · 01-30-2011, 10:51 AM

I cant wait, come on people get that money sent!!!

bigjeff1313 · 01-30-2011, 05:05 PM

Can't wait!!! I'm Crawler Innovations(customer). Not verry good at crawling yet. Just found out I'm gonna to have to learn how to crawl again. I'm willing to do that. I like the way they look & the set-up. Can't wait!!! Guess I'm gonna have to.

Question, do I have to put them together or do they come put together?

whoodie · 01-30-2011, 07:14 PM

Quote:

Originally Posted by bigjeff1313

Question, do I have to put them together or do they come put together?

I'm more than certain you have to put them together. I doubt that SDS Customs is going to loctite every nut and bolt for you.

Harley · 01-30-2011, 07:30 PM

Quote:

Originally Posted by whoodie

I'm more than certain you have to put them together. I doubt that SDS Customs is going to loctite every nut and bolt for you.

+ they don't come with internals, so even if they were assembled you will still need to disassemble them to install those pieces.

01-13-2011, 05:01 AM	#44
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Just for reference could someone please clarify the diameter of the gear pins. There are two diameters listed as spare parts on TCS, either 1.5mm or 2mm. It might help myself and other's in purchasing the parts needed to complete the axles. Oh and also the bearings sizes inside the case's. I know the locker bearings are 10x15, but are the 3rd and 2nd gear bearings 5x10 or 5x11? And finally anyone have a source for the 3x4mm coutersink screws? I got my last lot from tcs, but they don't seem to be stocking them any longer Thanks Kieren Last edited by Aussie Nerd; 01-13-2011 at 06:04 AM.

01-13-2011, 09:37 AM	#46
SDS Customz Rock Crawler Join Date: Dec 2008 Location: dallas Posts: 968	screws Mcmastercarr, they have lots of screws

01-24-2011, 10:51 AM	#49
phllint Quarry Creeper Join Date: Dec 2009 Location: aurora Posts: 344	ti fighters Iam in for an aluminum set. Where do I send the money to what PayPal acct? Its ready for you to have. Thanks a lot for a perfect set of axles long awaited and much needed for perfection

01-24-2011, 12:21 PM	#50
phllint Quarry Creeper Join Date: Dec 2009 Location: aurora Posts: 344	ti fights Anybody have a phone # for sds customs. My phone crapped out and I lost all my numbers.

01-29-2011, 10:17 PM	#52
SDS Customz Rock Crawler Join Date: Dec 2008 Location: dallas Posts: 968	Pre-Sale payment updates I have recieved payments from the following thus far, I know that several payments are on the way, though these are the ones that I have in hand. Al/Ti-Fighters- Harley Woody Crawler Innovations(customer) Kinetics 86Jeep (Super) Phllint TI-Fighters House Marogg Jon Leno TCTZ28 Last edited by SDS Customz; 02-15-2011 at 08:53 PM.

01-09-2011, 10:43 PM	#41
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	I thought as such, but just wondered anyway. Thanks Kieren

01-10-2011, 11:13 AM	#42
kineteks Quarry Creeper Join Date: Feb 2009 Location: Warwick Posts: 281	...any word yet on how close "we" are to being able to start a production run? Not that I'm anxious to get my paws on a set of these axles or anything

01-13-2011, 06:50 AM	#45
mattin Rock Stacker Join Date: Dec 2006 Location: Dortmund/Germany Posts: 83	Hey, the bearrings in the case are 5x10, the gearpins 1,5mm. greetings Martin

01-13-2011, 04:55 PM	#47
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Thanks to both Kieren

01-14-2011, 11:28 PM	#48
SDS Customz Rock Crawler Join Date: Dec 2008 Location: dallas Posts: 968	You are welcome sir.

01-24-2011, 02:20 PM	#51
RickM RCC Addict Join Date: Jan 2010 Location: Dallas Posts: 1,848	I dont have his number but I am pretty sure he was on the entry list for a pretty large comp this weekend in Arizona. I am guessing he is traveling today so you might just want to give him a chance to catch his breath and get back in. At least that is what I am doing as I am anxious to get some 300's from him!!

01-29-2011, 10:32 PM	#53
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	I'll still be a month or two out but I'm definitely getting a set Kieren

01-29-2011, 10:41 PM	#54
SDS Customz Rock Crawler Join Date: Dec 2008 Location: dallas Posts: 968	several guys are having to wait till there taxes get back or mid to end of Feb.

01-30-2011, 12:50 AM	#55
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	I'm just waiting for more money Kieren

01-30-2011, 09:05 AM	#56
Aggie01 Quarry Creeper Join Date: Jun 2010 Location: NTXRCC Posts: 488	I'll keep buying my lottery tickets.

Sponsored Links

01-30-2011, 10:51 AM	#57
Ty Quarry Creeper Join Date: Apr 2009 Location: Lincoln Posts: 371	I cant wait, come on people get that money sent!!!

01-30-2011, 05:05 PM	#58
bigjeff1313 Pebble Pounder Join Date: Jun 2009 Location: Van Posts: 129	Can't wait!!! I'm Crawler Innovations(customer). Not verry good at crawling yet. Just found out I'm gonna to have to learn how to crawl again. I'm willing to do that. I like the way they look & the set-up. Can't wait!!! Guess I'm gonna have to. Question, do I have to put them together or do they come put together? Last edited by bigjeff1313; 01-30-2011 at 05:11 PM.

RCCrawler Forums

Thread: TI-Fighters for sale