My Berg Revamp

[TheWheelman]

I have run a rig with that set up...as long as nothing binds . you ok. just makes you wide at the wheels
but it is not supposed to be run like that it does require both 8* c hubs and knuckle's....
like the set on my tubes u can see on rcbros build page

[scoutdawg]

I have the 8* chubs and from what I know I need wraith 8* knuckles if I am using sds 300's right
by the way there is no binding at all right here, and thanks for all the input guys it's much appreciated

[Monstergt]

Originally Posted by scoutdawg

I have the 8* chubs and from what I know I need wraith 8* knuckles if I am using sds 300's right
by the way there is no binding at all right here, and thanks for all the input guys it's much appreciated

If you have the first gen 300's you'll need axial stubs to run the 8* stuff if I'm correct . Now if you have the previous release Super 300's u need xr/wraith chubs and knuckles

[scoutdawg]

The knuckles I have on there now were originally on my Berg when I got it and everything I got with my shafts fit right in just like the original berg dog bones did. What knuckles should I be getting then?

[Monstergt]

If your running VP 8* chubs and knuckles for the ax10 u need 300 axial stubs. If your running wraith or xr chubs and knuckles u need either 300 HD's or wraith / xr shafts. Then u have the axles shafts Erik builds

[scoutdawg]

I already have the sds 300 cvd's, I am running vp 8* chubs, I dont know what kind of knuckles that they are I just know they are high steer and that they fit these shafts as well as the stock berg shafts as far as fitting and bearings.

[ittybitty]

You need the VP 8* knuckles for the Ax10. You said the k8* knuckles were on it when you bought it...which knuckles were on it?

Could you post a pic of the knuckle area without the tire and wheel installed?

[scoutdawg]

Maybe these will help

[ittybitty]

Yeah you can see where the collars on the shafts are rubbing on the c-hubs creating a groove. Definitely need the VP knuckles to make sure you don't tear up any parts.

Which knuckles were on it when you bought it?

[scoutdawg]

These were the knuckles on my original tubes when I got it then I bought these tubes off here used and these chubs were on it, they are vp 8*

[ittybitty]

Ok...so all you need are the knuckles.

Axial SCX10 knuckles 8 degree ax30496 ax80004

[scoutdawg]

A few updates. I am right near the end. Just fine tuning and getting everything like I want it. I want to thank everyone for their insight and help with everything I have had questions about and just had no clue what was going on LOL.
Here is what I now have.

Custom T1E Rock Show Chassis
HH Torquemaster Pro's (I think) 35T
Shaved and milled Berg V1 Cases powder coated black
DLux Front tubes-SDS 300 shafts
Clover Rear tubes-RC Axlemaster shafts
Ti Links
3.5'' Big Bores Front
4'' Big Bores Rear
VP Dirty Harrys
VP SLW's
Custom Hybrid Tires
Smashed dual BRXL's
CC BEC
FlySky GT3C Hacked and modded
Custom Battery Holder

This isn't a weight watcher but it's where I am at for the time being. Soon maybe some light wheels and knuckle weights, I also have to get a set of 8* VP knuckles.

[Alamo71]

Dam that berg puts mine to shame very nice sick bro

[scoutdawg]

Thanks bud, it's a constant work in progress. Hoping to run it for a while like this now.

[scoutdawg]

New skins on a totally new rig almost. Been a long time since updating.



Sent from my Galaxy SIII

[Session]

Nice much sleeker! Isn't that a T1E? Before I bought my Double A I looked into that chassis but could not figure out how to get one. Mine is 60/40 I believe but yours looks 50/50 from the looks of your link lengths. Have you run it yet?

[scoutdawg]

Thanks man. It is a T1E Sniper but it has a new custom updated topper, I got my chassis used on here and then got the topper from someone else on here. I have ran it and seem to really like it but would like a bit more forward bias but its all just playing and seeing what works.

[Wizardman]

Originally Posted by scoutdawg

New skins on a totally new rig almost. Been a long time since updating.



Sent from my Galaxy SIII

Man your berg is looking great bud! Nice work....

I just traded for a used berg the other day. Got to gather a couple things before it's comp ready.



Sent from my HTC6435LVW using Tapatalk