RCCrawler Forums

Mini · 03-15-2010, 10:35 AM

Lolololol Nice and welcome.

Mini · 03-16-2010, 07:22 AM

UPDATE!!!!

Comp format:

4 course's

10 gate's

5 min. time

40 point out

See everyone soon.

dshelowjr · 03-18-2010, 07:28 PM

9 more days

. Is everyone ready??

Mini · 03-18-2010, 07:32 PM

Updated Drivers list

1. Mini
2. Scattman
3. Goodoldlevi
4. Goodoldlevi JR
5. Goodoldlevi Dad
6. Dshelowjr
7. Floridarocks
8. Tydl
9. Kennyj
10. Motorman
12. Tydl Friend 3
13. Tydl Friend 4
14. NPBCrawlerz
15. DickyT
16. Speedracer19

they better be ready gonna have al kind of course's gonna be sweet.

Scattman · 03-19-2010, 06:37 PM

I have shaved over a pound off of my comp rig so far.

Mini · 03-19-2010, 10:27 PM

Mice work matt make sure you get the push down 12.5 length lol. Am doing some tire and foam tunning to get it just right also trying some new wheel base length. I gotta get a scale and see what weight am at.

DickyT · 03-20-2010, 02:53 AM

Quote:

Originally Posted by Scattman

I have shaved over a pound off of my comp rig so far.

I've done about the same in the past week, going to test it tomorrow and see if I want to redo the front uppers in delrin before the comp with the new vp plate, or save that for after.

DickyT · 03-20-2010, 09:05 AM

Damn bouts of insomnia... I stayed up all night, cut and mounted the VP 4 link\batt plate replacing the ckrc 3/4 link\batt plate (weight savings and it's VP

) did the upper links in 1/4 delrin, and put on the losi gold springs, smooooth like buttah! not on a scale yet, but easily in the mid 5 lb range, it started at 6.6 and feels like a feather in comparison. I will weigh it in this week at work.

Mini · 03-20-2010, 03:15 PM

A shafty at 5lbs thats impresive and at the same time not possiable lololol.

were did you get the delrin from?

Scattman · 03-20-2010, 03:43 PM

Quote:

Originally Posted by Mini

A shafty at 5lbs thats impresive and at the same time not possiable lololol.

were did you get the delrin from?

I wasn't going to be the 1st to say it.

Mini · 03-20-2010, 05:21 PM

Quote:

Originally Posted by Scattman

I wasn't going to be the 1st to say it.

Yea Icome from experiance when it comes to shafty's lolololol

DickyT · 03-20-2010, 05:44 PM

The delrin is from McMaster-Carr. I will put it on a digital scale at my jobs engineering lab this week and see what it says. My guesstimate may be a little light, but I think it is under 6 lbs, my guess is mid fives. You guys certainly have more experience, I'll post a pic on the scale so I can be proven wrong! Won't be a first time.

Mini · 03-20-2010, 05:52 PM

lololololololololol i say 6.5 maybe 7.

DickyT · 03-20-2010, 05:56 PM

Quote:

Originally Posted by Mini

lololololololololol i say 6.5 maybe 7.

It was 6.6 with the 10-24 all thread links, 1/4" 304 stainless link sleeves, heavier front and rear plates, and 2 bullets in the rear wheels. No way is it 7 now... lol, I'll bring it to Warrick's tomorrow, you lift it and guess, then I will photo it on scale!

Scattman · 03-20-2010, 05:58 PM

6.1

DickyT · 03-20-2010, 06:13 PM

Quote:

Originally Posted by Scattman

6.1

I'll buy that, the "hand" scale is far from accurate. I have never so much wanted to go to my main job. lol. Either which way I look forward to next week, it will be fun, and an awesome way to spend a b-day.

Mini · 03-20-2010, 08:40 PM

You gotta make sure you weigh it how your gonna run it. The 7lbs was a joke, still think won't be under 6lbs.

Mini · 03-22-2010, 07:43 AM

And the count down begin's lololololol

dshelowjr · 03-22-2010, 01:18 PM

Is it sat. yet???

Mini · 03-22-2010, 03:08 PM

Just wanted to add to the rules no Offcourse Repair's

03-18-2010, 07:28 PM	#43
dshelowjr Quarry Creeper Join Date: Sep 2007 Location: Building a scaler!! Posts: 313	9 more days. Is everyone ready??

03-20-2010, 09:05 AM	#48
DickyT I wanna be Dave Join Date: Oct 2007 Location: Scumrise, Flooriduh Posts: 5,181	Damn bouts of insomnia... I stayed up all night, cut and mounted the VP 4 link\batt plate replacing the ckrc 3/4 link\batt plate (weight savings and it's VP) did the upper links in 1/4 delrin, and put on the losi gold springs, smooooth like buttah! not on a scale yet, but easily in the mid 5 lb range, it started at 6.6 and feels like a feather in comparison. I will weigh it in this week at work.

03-15-2010, 10:35 AM	#41
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	Lolololol Nice and welcome.

03-16-2010, 07:22 AM	#42
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	UPDATE!!!! Comp format: 4 course's 10 gate's 5 min. time 40 point out See everyone soon.

03-18-2010, 07:32 PM	#44
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	Updated Drivers list 1. Mini 2. Scattman 3. Goodoldlevi 4. Goodoldlevi JR 5. Goodoldlevi Dad 6. Dshelowjr 7. Floridarocks 8. Tydl 9. Kennyj 10. Motorman 12. Tydl Friend 3 13. Tydl Friend 4 14. NPBCrawlerz 15. DickyT 16. Speedracer19 they better be ready gonna have al kind of course's gonna be sweet.

03-19-2010, 06:37 PM	#45
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	I have shaved over a pound off of my comp rig so far.

03-19-2010, 10:27 PM	#46
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	Mice work matt make sure you get the push down 12.5 length lol. Am doing some tire and foam tunning to get it just right also trying some new wheel base length. I gotta get a scale and see what weight am at.

03-20-2010, 03:15 PM	#49
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	A shafty at 5lbs thats impresive and at the same time not possiable lololol. were did you get the delrin from?

03-20-2010, 05:44 PM	#52
DickyT I wanna be Dave Join Date: Oct 2007 Location: Scumrise, Flooriduh Posts: 5,181	The delrin is from McMaster-Carr. I will put it on a digital scale at my jobs engineering lab this week and see what it says. My guesstimate may be a little light, but I think it is under 6 lbs, my guess is mid fives. You guys certainly have more experience, I'll post a pic on the scale so I can be proven wrong! Won't be a first time.

03-20-2010, 05:52 PM	#53
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	lololololololololol i say 6.5 maybe 7.

03-20-2010, 05:58 PM	#55
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	6.1

03-20-2010, 08:40 PM	#57
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	You gotta make sure you weigh it how your gonna run it. The 7lbs was a joke, still think won't be under 6lbs.

Sponsored Links

03-22-2010, 07:43 AM	#58
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	And the count down begin's lololololol

03-22-2010, 01:18 PM	#59
dshelowjr Quarry Creeper Join Date: Sep 2007 Location: Building a scaler!! Posts: 313	Is it sat. yet???

03-22-2010, 03:08 PM	#60
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	Just wanted to add to the rules no Offcourse Repair's

RCCrawler Forums

Thread: S.S.R.C.C. 2010 Comp 1