RCCrawler Forums

Scattman · 01-17-2011, 01:59 PM

Pics don't do the area justice. We both forgot the cameras.

There are some areas for scalers now that are top-notch.

There is a big tunnel down through the bottom with plenty of room and easy access by scalers from either end of the tunnel as well.

I can't wait to get my scaler out there, probably this week. Might try and get a little more done on the spot.

slammin1984 · 01-17-2011, 03:39 PM

I would like to come up there to gville sometime. Are you guys up there every weekend just about? The area looks really good. I am still new to all this so I would like to see what all is out there.

Scattman · 01-17-2011, 03:48 PM

Quote:

Originally Posted by slammin1984

I would like to come up there to gville sometime. Are you guys up there every weekend just about? The area looks really good. I am still new to all this so I would like to see what all is out there.

We have been out there more lately trying to clean it up while the cold had everything near dead.

We have uncovered numerous new spots out there recently.

Just pm me, I live an hour away but work and go to school in G-ville.

beidave · 01-17-2011, 05:48 PM

Look real good anyone planning to go out this weekend? Sat or Sun.

Scattman · 01-17-2011, 05:57 PM

Probably, got more cleaning to do.

beidave · 01-22-2011, 12:41 PM

Going up tomorrow. Any other takers. I'll bring tools if there's a scope of work...

Scattman · 01-22-2011, 04:19 PM

No for me tomorrow. My rig is apart for rewiring. Got some school work I need to do as well.

Scattman · 01-25-2011, 11:45 AM

This weekend anyone? Pretty sure Kenny is going out as well.

kennyj · 01-25-2011, 12:00 PM

I doubt I will be out. I was in bad shape in the area of axle bearings, so the whole truck is torn apart waiting on bearings and 1 esc. $50 in axle bearings.

And those were the cheap ones.

I also fixed the misplaced link. Thanks Matt.

I also got some big bores from Cwettstain and modded those. Man are these things nice.

Scattman · 01-25-2011, 12:15 PM

We can still work on the area fawker.

Quote:

Originally Posted by kennyj

I doubt I will be out. I was in bad shape in the area of axle bearings, so the whole truck is torn apart waiting on bearings and 1 esc. $50 in axle bearings.

And those were the cheap ones.

I also fixed the misplaced link. Thanks Matt.

I also got some big bores from Cwettstain and modded those. Man are these things nice.

Kinson · 01-25-2011, 01:56 PM

Quote:

Originally Posted by Scattman

This weekend anyone? Pretty sure Kenny is going out as well.

Donnie and I are heading to either Alabama or South Carolina, both are the same distance just trying to figure which one to hit this weekend.

Scattman · 03-23-2011, 07:01 PM

Saturday morning, the 26th.......................be there or be square.

dshelowjr · 03-23-2011, 07:18 PM

I'll be there.

Any Jax. crawlers want to ride?

Scattman · 03-24-2011, 06:31 AM

Quote:

Originally Posted by dshelowjr

I'll be there.

Any Jax. crawlers want to ride?

You are the Jax crawler.

Kenny will be there as well.

cwettstain · 03-24-2011, 07:19 AM

I'll miss it again. I have family coming in.

Have fun.

kennyj · 03-24-2011, 05:00 PM

I will be there.

dshelowjr · 03-24-2011, 05:40 PM

Quote:

Originally Posted by Scattman

You are the Jax crawler.

I guess so. Why is that every time I go to hobby world I run into people with crawlers but nobody around here crawls

Mini · 03-24-2011, 07:17 PM

Quote:

Originally Posted by dshelowjr

I guess so. Why is that every time I go to hobby world I run into people with crawlers but nobody around here crawls

Good to see your back, we miss you

dshelowjr · 03-25-2011, 05:39 PM

All charged up , ready to go.

dshelowjr · 03-27-2011, 09:20 PM

I had a great time this weekend. I can't believe all the work Matt & Kenny has put into this place. Thanks guys for making an awesome place even more unbelievable. I just finished the rod end mod to my shocks & it feels so much better

. I can't wait till the next comp . I won't be missing that one

03-27-2011, 09:20 PM	#160
dshelowjr Quarry Creeper Join Date: Sep 2007 Location: Building a scaler!! Posts: 313	I had a great time this weekend. I can't believe all the work Matt & Kenny has put into this place. Thanks guys for making an awesome place even more unbelievable. I just finished the rod end mod to my shocks & it feels so much better. I can't wait till the next comp . I won't be missing that one

01-17-2011, 01:59 PM	#141
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	Pics don't do the area justice. We both forgot the cameras. There are some areas for scalers now that are top-notch. There is a big tunnel down through the bottom with plenty of room and easy access by scalers from either end of the tunnel as well. I can't wait to get my scaler out there, probably this week. Might try and get a little more done on the spot.

01-17-2011, 03:39 PM	#142
slammin1984 Pebble Pounder Join Date: Dec 2010 Location: SLOcala, FL Posts: 124	I would like to come up there to gville sometime. Are you guys up there every weekend just about? The area looks really good. I am still new to all this so I would like to see what all is out there.

01-17-2011, 05:48 PM	#144
beidave Pebble Pounder Join Date: Jun 2010 Location: ocala Posts: 121	Look real good anyone planning to go out this weekend? Sat or Sun.

01-17-2011, 05:57 PM	#145
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	Probably, got more cleaning to do.

01-22-2011, 12:41 PM	#146
beidave Pebble Pounder Join Date: Jun 2010 Location: ocala Posts: 121	Going up tomorrow. Any other takers. I'll bring tools if there's a scope of work...

01-22-2011, 04:19 PM	#147
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	No for me tomorrow. My rig is apart for rewiring. Got some school work I need to do as well.

01-25-2011, 11:45 AM	#148
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	This weekend anyone? Pretty sure Kenny is going out as well.

01-25-2011, 12:00 PM	#149
kennyj Rock Crawler Join Date: Nov 2009 Location: Wildwood Posts: 502	I doubt I will be out. I was in bad shape in the area of axle bearings, so the whole truck is torn apart waiting on bearings and 1 esc. $50 in axle bearings. And those were the cheap ones. I also fixed the misplaced link. Thanks Matt. I also got some big bores from Cwettstain and modded those. Man are these things nice.

03-23-2011, 07:01 PM	#152
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	Saturday morning, the 26th.......................be there or be square.

03-23-2011, 07:18 PM	#153
dshelowjr Quarry Creeper Join Date: Sep 2007 Location: Building a scaler!! Posts: 313	I'll be there. Any Jax. crawlers want to ride?

Sponsored Links

03-24-2011, 07:19 AM	#155
cwettstain Pebble Pounder Join Date: Mar 2010 Location: Jacksonville Posts: 108	I'll miss it again. I have family coming in. Have fun.

03-24-2011, 05:00 PM	#156
kennyj Rock Crawler Join Date: Nov 2009 Location: Wildwood Posts: 502	I will be there.

03-25-2011, 05:39 PM	#159
dshelowjr Quarry Creeper Join Date: Sep 2007 Location: Building a scaler!! Posts: 313	All charged up , ready to go.

RCCrawler Forums

Thread: The Gainesville Thread