RCCrawler Forums

AsILayDying · 10-10-2011, 06:10 PM

Well Im just trying to set it up asap. Lets figure out who is going. I am in, but if there isnt enough interest or people going Ill just be going to the Sanford Boat Ramp. Lets see who wants to make it a good day out there..... Make some vids.

iamsuperbleeder · 10-10-2011, 07:01 PM

if enough people respond, I'm game

hopefully my Boggers will be in by the weekend (and my new transmitter and receiver) and I'll be able to have some good fun in the water and sand

kennyj · 10-10-2011, 08:21 PM

I am in.

version_three · 10-10-2011, 09:05 PM

I'll be there - no scaler though

iamsuperbleeder · 10-10-2011, 11:30 PM

yeah we definitely need some more scalers to come out! you better be water proof though if you want to get the most out of the area

Sent from my space age wireless communication device.

Scattman · 10-11-2011, 06:20 AM

1.9 Iroks came in so my scaler will be ready, might even waterproof it again.

Scattman · 10-11-2011, 06:21 AM

Gonna try and have you a scaler to run Kenny.

kennyj · 10-11-2011, 07:09 AM

We'll see how it goes.

iamsuperbleeder · 10-11-2011, 10:57 AM

also just scored a Wraith trans and 20t motor to bolt onto the rig

that'll be really awesome if that shows up by Saturday so I can install it! the drilled through outputs should eliminate the notorious drive shaft yoke popping off thing, and the added length on one side of the trans because of the dig option should help out my rear driveshaft from being pretty much fully extended all the time :P PLUS, the 20t motor should give the rig a little more pep

should be a blast out there if it all shows up for me!

Sent from my space age wireless communication device.

AsILayDying · 10-11-2011, 03:16 PM

My 200 dollar order of parts from RPP should be here by Thursday so Ill have some work to do but Im def in for Sunday.
@Version when will you head out there , Ill follow you or head out with you which ever. I will also have both my Scalers running so you will be running in the water with us. Unless i can drive both at the same time.

Anyways Ill be ready to go first thing Sunday, just let me know when and where to meet up with you.

version_three · 10-12-2011, 05:30 AM

@dying, let's plan on meeting at my place around 730. I'll txt you my address in a bit.

If anyone else in the sanford area wants to meet up and carpool or follow us down, we can meet at my place in Deltona or at the park'n'ride right off I4 on Saxon.

cameraman · 10-12-2011, 06:31 AM

im not goin to be able to make it its biketober and im goin riding

speed ghilliesniper · 10-12-2011, 05:37 PM

Just put in an order to rpp and amain, both with priority. If they come in then I'll head out to Gainesville, how early do y'all usually get out there?

iamsuperbleeder · 10-12-2011, 07:36 PM

I'm going to shoot for 9:30ish. I'll go straight there since I actually know where it's at this time

Scattman · 10-12-2011, 07:56 PM

Where are you coming to in Gainesville? Straight to the creek or meet up at the comp spot? The creek is about 10 mins from the comp spot.
I kinda need too show you guys where it is at, there are many diff sections of the creek in town.

iamsuperbleeder · 10-12-2011, 08:55 PM

aw crap that's right, I DON'T know where the creek is at

can you pinpoint it on Google Maps?

version_three · 10-13-2011, 01:50 PM

If we get on the road by 730 like I'm planning, AsILayDying and I should be at the comp spot by around 930.

Robotboy · 10-13-2011, 03:31 PM

I'm planning on being there about the same time as well

Scattman · 10-13-2011, 03:58 PM

I'll plan on the same time, show the guys the scale spots at the comp site, then have them follow me over to the creek. My comp rig is not together so no real need for me to stay at the comp site.

Scattman · 10-13-2011, 04:10 PM

Anybody got any spare outdrives for an Axial tranny? Trying to get a scaler together for Kenny to run. That is the only thing holding me up for this weekend for the 2nd scaler. If someone had one I could swap it in on Sunday for Kenny.

10-10-2011, 06:10 PM	#1
AsILayDying RCC Addict Join Date: Jul 2011 Location: Orlando Posts: 1,153	Gainesville Sunday October 16th Well Im just trying to set it up asap. Lets figure out who is going. I am in, but if there isnt enough interest or people going Ill just be going to the Sanford Boat Ramp. Lets see who wants to make it a good day out there..... Make some vids.

10-10-2011, 07:01 PM	#2
iamsuperbleeder Quarry Creeper Join Date: Jul 2011 Location: Lake City, Fl Posts: 380	if enough people respond, I'm game hopefully my Boggers will be in by the weekend (and my new transmitter and receiver) and I'll be able to have some good fun in the water and sand Last edited by iamsuperbleeder; 10-10-2011 at 08:59 PM.

10-12-2011, 07:56 PM	#15
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	Where are you coming to in Gainesville? Straight to the creek or meet up at the comp spot? The creek is about 10 mins from the comp spot. I kinda need too show you guys where it is at, there are many diff sections of the creek in town. Last edited by Scattman; 10-12-2011 at 07:58 PM.

10-13-2011, 03:58 PM	#19
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	I'll plan on the same time, show the guys the scale spots at the comp site, then have them follow me over to the creek. My comp rig is not together so no real need for me to stay at the comp site. Last edited by Scattman; 10-13-2011 at 04:10 PM.

10-10-2011, 08:21 PM	#3
kennyj Rock Crawler Join Date: Nov 2009 Location: Wildwood Posts: 502	I am in.

10-10-2011, 09:05 PM	#4
version_three Rock Crawler Join Date: Apr 2010 Location: Central FL Posts: 509	I'll be there - no scaler though

10-10-2011, 11:30 PM	#5
iamsuperbleeder Quarry Creeper Join Date: Jul 2011 Location: Lake City, Fl Posts: 380	yeah we definitely need some more scalers to come out! you better be water proof though if you want to get the most out of the area Sent from my space age wireless communication device.

10-11-2011, 06:20 AM	#6
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	1.9 Iroks came in so my scaler will be ready, might even waterproof it again.

10-11-2011, 06:21 AM	#7
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	Gonna try and have you a scaler to run Kenny.

10-11-2011, 07:09 AM	#8
kennyj Rock Crawler Join Date: Nov 2009 Location: Wildwood Posts: 502	We'll see how it goes.

10-11-2011, 10:57 AM	#9
iamsuperbleeder Quarry Creeper Join Date: Jul 2011 Location: Lake City, Fl Posts: 380	also just scored a Wraith trans and 20t motor to bolt onto the rig that'll be really awesome if that shows up by Saturday so I can install it! the drilled through outputs should eliminate the notorious drive shaft yoke popping off thing, and the added length on one side of the trans because of the dig option should help out my rear driveshaft from being pretty much fully extended all the time :P PLUS, the 20t motor should give the rig a little more pep should be a blast out there if it all shows up for me! Sent from my space age wireless communication device.

10-11-2011, 03:16 PM	#10
AsILayDying RCC Addict Join Date: Jul 2011 Location: Orlando Posts: 1,153	My 200 dollar order of parts from RPP should be here by Thursday so Ill have some work to do but Im def in for Sunday. @Version when will you head out there , Ill follow you or head out with you which ever. I will also have both my Scalers running so you will be running in the water with us. Unless i can drive both at the same time. Anyways Ill be ready to go first thing Sunday, just let me know when and where to meet up with you.

10-12-2011, 05:30 AM	#11
version_three Rock Crawler Join Date: Apr 2010 Location: Central FL Posts: 509	@dying, let's plan on meeting at my place around 730. I'll txt you my address in a bit. If anyone else in the sanford area wants to meet up and carpool or follow us down, we can meet at my place in Deltona or at the park'n'ride right off I4 on Saxon.

10-12-2011, 06:31 AM	#12
cameraman Pebble Pounder Join Date: Sep 2011 Location: edgewater Posts: 138	im not goin to be able to make it its biketober and im goin riding

Sponsored Links

10-12-2011, 05:37 PM	#13
speed ghilliesniper Quarry Creeper Join Date: Dec 2009 Location: St. Augustine Posts: 288	Just put in an order to rpp and amain, both with priority. If they come in then I'll head out to Gainesville, how early do y'all usually get out there?

10-12-2011, 07:36 PM	#14
iamsuperbleeder Quarry Creeper Join Date: Jul 2011 Location: Lake City, Fl Posts: 380	I'm going to shoot for 9:30ish. I'll go straight there since I actually know where it's at this time

10-12-2011, 08:55 PM	#16
iamsuperbleeder Quarry Creeper Join Date: Jul 2011 Location: Lake City, Fl Posts: 380	aw crap that's right, I DON'T know where the creek is at can you pinpoint it on Google Maps?

10-13-2011, 01:50 PM	#17
version_three Rock Crawler Join Date: Apr 2010 Location: Central FL Posts: 509	If we get on the road by 730 like I'm planning, AsILayDying and I should be at the comp spot by around 930.

10-13-2011, 03:31 PM	#18
Robotboy RCC Addict Join Date: May 2009 Location: In the warmth! Posts: 1,163	I'm planning on being there about the same time as well

10-13-2011, 04:10 PM	#20
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	Anybody got any spare outdrives for an Axial tranny? Trying to get a scaler together for Kenny to run. That is the only thing holding me up for this weekend for the 2nd scaler. If someone had one I could swap it in on Sunday for Kenny.

RCCrawler Forums

Thread: Gainesville Sunday October 16th