Go Back   RCCrawler Forums > RCCrawler General Tech > General Crawlers
Loading

Notices

Thread: Nylint wheel adapter for emaxx

Reply
 
LinkBack Thread Tools Display Modes
Old 01-16-2006, 05:52 PM   #1
Newbie
 
Join Date: Dec 2005
Location: Omaha
Posts: 29
Default Nylint wheel adapter for emaxx

Where can I get a wheel adapter to put Nylint 1:6 scale wheels on an Emaxx?
DrasticSports is offline   Reply With Quote
Sponsored Links
Old 01-22-2006, 07:13 AM   #2
Rock Stacker
 
Join Date: Jan 2006
Location: newhampton
Posts: 50
Default try this...

I have posted a reply to another thread as well...however.f you can coto a snowmobile shop or marina and get some of the tool kits that commonly are disgarded..they have sume stamped or pressed sockets that are essentialy a pipe pressed to be a socket so they are hex inside and out. now in your case you could fint the "socket" that fits your truck and add a piece of hex stock inside to fit the wheel....do you follow? I dont have a digital cammera so...but I do have claw max tires with e maxx wheels on my nylint.....check it out....good luck
shawnf6 is offline   Reply With Quote
Old 01-22-2006, 09:14 AM   #3
Rock Crawler
 
Join Date: Feb 2005
Location: Hardin, KY
Posts: 976
Default

shawn, he is trying to go DOWN in size, not up....

you would need a wheel widener/adaptor because otherwise you would have to machine the hex down on your wheels, and i reeeallllly dont think you want to do that.

you would have to go from 14mm (i THINK thats what maxx is, right?) to 10mm to run the nylint wheels.
SlammedMini469 is offline   Reply With Quote
Old 01-22-2006, 09:21 PM   #4
Rock Stacker
 
Join Date: Jan 2006
Location: newhampton
Posts: 50
Default

Quote:
Originally Posted by SlammedMini469
shawn, he is trying to go DOWN in size, not up....

you would need a wheel widener/adaptor because otherwise you would have to machine the hex down on your wheels, and i reeeallllly dont think you want to do that.

you would have to go from 14mm (i THINK thats what maxx is, right?) to 10mm to run the nylint wheels.
hey slammed mini...I hear what you are saying however you should read my whole post.....I didnt say he was doing the same as I ...just that the same piece I used witha small piece of 10mm hex stock inserted with a hole in it for the screw? do you get it now....it would take about 10 minutes....I just picked up a set of stock nylints for my buddy to do this exact thing...I will post pictures of it when we do it...
shawnf6 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com