| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
07-11-2010, 12:43 AM
| #1 |
| Rock Stacker Join Date: Jan 2010 Location: Marshall
Posts: 60
|  What gearing is everyone running?
I was wondering what gearing everyone is running with the ax10 and what turn motor and how it does? I have the stock gearing and 45t Tekin on 3s... runnin pretty good! |
|  |
| Sponsored Links | |
| | |
|
07-11-2010, 02:15 AM
| #2 |
| Quarry Creeper Join Date: Feb 2010 Location: melbourne
Posts: 215
|
I use 32p gears and i have a 54t spur and 15t pinion and i use the velenion brushless motor and esc and it works great for my scale truck. Plus when i used a 87t spur and 24t pinion when i had 48p gears i had good speed but my truck would stutter real bad when crawling but ever since i went to 32p gears i get more speed and no stutter. Me and my wife have the same setup in our trucks and big hills and deep mud holes fear us  |
|
| |
|
07-11-2010, 02:15 AM
| #3 |
| Quarry Creeper Join Date: Feb 2010 Location: melbourne
Posts: 215
|
I use 32p gears and i have a 54t spur and 15t pinion and i use the velenion brushless motor and esc and it works great for my scale truck. Plus when i used a 87t spur and 24t pinion when i had 48p gears i had good speed but my truck would stutter real bad when crawling but ever since i went to 32p gears i get more speed and no stutter. Me and my wife have the same setup in our trucks and big hills and deep mud holes fear us |
|
| |
|
07-11-2010, 10:05 AM
| #4 |
| I wanna be Dave Join Date: Nov 2008 Location: Where freedom is earned.
Posts: 2,011
|
If it's running good, why bother? Don't follow the crowd, use what works for your skill. Gearing and motor turns are a choice. Don't let this forum bottle feed your decision, check out someone elses rig that different if you can and see how you like it.
|
|
| |
|
07-11-2010, 12:37 PM
| #5 |
| Quarry Creeper Join Date: Sep 2009 Location: west sacramento
Posts: 282
|
stock. 35turn. slower rear axle.
|
|
| |
|
| |
Linear Mode
