02-28-2014, 03:05 PM | #1 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| SCX10 Shocks Build
So my friend asked me to build him a really nice set of SCX10 Shocks for one of his Comp rigs so here's what I am building for him... Parts list: ~RCBros Eggressor Shock Bodies ~RCBros Aluminum Shock Caps ~Notch Eight Designs SCX Shock Collars ~Jeepindoug Springcups ~Titanium Shock Shafts ~Axial Machined Pistons ~Traxxas Shock Rebuild kit TRA2362 (2) ~HPI 9x3.5mm Shock Bladder HPI87065 These Aluminum Shock caps are super nice really good machining perfect fit just like all RCBros products First thing I did was drill out the shock caps for bleeding the shocks. Next I installed the HPI Shock Bladders in the caps. Finished shock caps Next thing were the shock bodies from RCBros. Like the shock caps amazing machine and everything is perfect on them. Installing the Traxxas Shock kit was easy except the C-Clips Small thin plastic washer Xring seal Thick white spacer Xring Seal Large thing plastic washer C-clip Put the Caps and collars on the shocks and they are done for now just waiting on the Ti Shafts and Machined Pistons. The Notch Eight Shock collars are super nice. They have a nice snug fit over the shock bodies and you can get them in different colors |
Sponsored Links | |
02-28-2014, 05:26 PM | #2 |
RCC Addict Join Date: Apr 2012 Location: Williamsport, PA
Posts: 1,360
| Re: SCX10 Shocks Build
Very nice write up Everett. Looking forward to checking out the shafts when you get them.
|
02-28-2014, 09:22 PM | #3 |
Fifth dimension Join Date: Oct 2012 Location: Quakertown
Posts: 2,066
| Re: SCX10 Shocks Build
Good stuff EY! See world, I'm not the only guy who gets folks to make my stuff when need be;)
|
03-03-2014, 10:37 AM | #4 |
Quarry Creeper Join Date: Jul 2008 Location: Reno
Posts: 388
| Re: SCX10 Shocks Build
Updates? Who's making the shafts?
|
04-07-2014, 04:15 PM | #5 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: SCX10 Shocks Build Time for an update... Shafts finally showed up after spending almost 4 weeks en route to me... The fit and finish on these is amazing and they are super smooth I got them and installed the Axial Machined Pistons on them which went on easily and fit perfectly. Next I installed them and filled the shocks with oil and bled them... I installed the Jeepindoug spring cups and MRC Silver Springs. (Didn't have Mini-T Silvers) |
04-07-2014, 07:49 PM | #6 |
Rock Crawler Join Date: May 2008 Location: The Beautiful South
Posts: 617
| Re: SCX10 Shocks Build
Sweet build detail.
|
04-07-2014, 08:15 PM | #7 |
Rock Crawler Join Date: Feb 2006 Location: Where the foams are always wet
Posts: 878
| Re: SCX10 Shocks Build
Do you have weight comparisons of all these fancy parts?
|
04-07-2014, 09:22 PM | #8 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: SCX10 Shocks Build Thanks! Sorry I don't... I would if I had a scale that weighs in grams The guy I built these for came and picked them up and we installed them on his XR... They replaced the Big Bores he was running on there and now the shocks are buttery smooth |
04-12-2014, 06:14 AM | #9 |
RCC Addict Join Date: Jul 2009 Location: Reno, Nv
Posts: 1,964
| Re: SCX10 Shocks Build
Do you have a ball bark on the cost of them?
|
04-12-2014, 07:29 AM | #10 |
RCC Addict Join Date: May 2012 Location: Folsom
Posts: 1,867
| Re: SCX10 Shocks Build
The shock bodies alone are near $100. This is definitely not a cheap route for shock absorbers
|
04-12-2014, 09:15 AM | #11 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: SCX10 Shocks Build These were around $140 for everything for them give or take a few $$ The shock bodies are $55 so not too bad |
04-12-2014, 09:39 AM | #12 |
RCC Addict Join Date: May 2012 Location: Folsom
Posts: 1,867
| Re: SCX10 Shocks Build
^ you're right! it's been a while since I looked at this option. The shock bodies used to be $45 per pair (on sale). I remember because I was given $100 from my parents for my birthday and looked to buy a set all four would have wiped out my cash. I decided to go another route.
|
04-12-2014, 10:53 AM | #13 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Sent from my VS980 4G using Tapatalk |
04-12-2014, 11:53 PM | #14 | |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: SCX10 Shocks Build Quote:
LOL yeah They are spending but soo nice... Got some feedback from my friend and he said they are soo much better than the Big Bores that he had on there... No leaky issues and super smooth | |
04-23-2014, 09:52 PM | #15 |
Newbie Join Date: Mar 2014 Location: paradise
Posts: 40
|
That is very clean they been put to the test yet? What weight oil you running Sent from my HTC6600LVW using Tapatalk |
04-23-2014, 11:24 PM | #16 |
Fifth dimension Join Date: Oct 2012 Location: Quakertown
Posts: 2,066
| Re: SCX10 Shocks Build |
04-24-2014, 12:41 PM | #17 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: SCX10 Shocks Build |
| |