|
| LinkBack | Thread Tools | Display Modes |
03-29-2013, 03:46 PM | #1 |
Rock Stacker Join Date: May 2010 Location: tx
Posts: 73
| DIY/Homemade transfer case
I am looking for some direction on building a transfer. I've tried search but only came up with a hand full of threads. The one I am looking to do is the two pinion gears sandwiched between to steel or alloy plates. Thanks P.S I dont have a CNC machine |
Sponsored Links | |
03-29-2013, 07:37 PM | #2 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: DIY/Homemade transfer case
May want to PM "bob1961" (I believe) since I know he has done "drill press transfer cases" before. He is a member of GSRCRC, my local group. |
03-30-2013, 07:13 AM | #3 |
Pebble Pounder Join Date: Nov 2011 Location: Kittanning
Posts: 181
| Re: DIY/Homemade transfer case
Let me know what happens now... coz i have been wanting to build one also thanks |
03-30-2013, 01:35 PM | #4 |
Rock Crawler Join Date: May 2012 Location: Australia
Posts: 517
| Re: DIY/Homemade transfer case
You don't really need a cnc. Make it like a crawler chassis. Clamp the 2 plates together and drill them in one go, that want all your holes line up. Then use standoff to space it apart. About the most important thing is to make your you measure your gear centers correctly, so you maintain correct gear mesh |
04-03-2013, 01:29 PM | #5 |
Newbie Join Date: Jun 2008 Location: Barstow
Posts: 37
|
I've made my own tranny before, same method as above, using an axial center diff mated straight to the pinion. You could do it with two center diffs though. I used flanged bearings and instead of standoffs I made a case by stacking up styrene sheet to the proper thickness and cut out the shape I needed. Drill press was my only tool. Sent from my SCH-I605 using Tapatalk 2 |
DIY/Homemade transfer case - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Homemade transfer case | firefighter1211 | General Scale Talk | 13 | 06-28-2011 11:57 PM |
1:18 transfer case? | the_ghetto_rig | General Scale Talk | 1 | 12-25-2009 02:14 PM |
GIVEAWAY-Cold Case, CRT 1.5 Transfer Case | Crawln Coles | Scale Accessories | 215 | 02-02-2009 03:31 PM |
DIY for bending homemade links | cdl822 | General Crawlers | 8 | 07-25-2008 07:09 PM |
| |