Go Back   RCCrawler Forums > RCCrawler General Tech > General Crawlers
Loading

Notices

Thread: My RR10 bomber build.

Reply
 
LinkBack Thread Tools Display Modes
Old 04-07-2016, 12:38 PM   #1
Newbie
 
Join Date: Mar 2016
Location: US
Posts: 12
Default My RR10 bomber build.

Looking for a bit of help. Getting an idea of exactly what I'm wanting to purchase before buying the wrong stuff.

What I'm looking to do:
Mainly trails. Not building for comps by any means. Terrain will be mix of rock, mud, sand, and dirt. Midwest creeks. Loose rocky muddy hills as well. Not at all racing. Wanting about 10mph top speed for tire cleanout and steeper hills. Also wanting better crawl control as I will mostly be moving slow.

My idea so far:
Vanquish rockjock currie axles front and rear.
Vanquish chubs and knuckles
Vanquish HD axle shafts
Ssd driveshafts
Vanquish titanium steering and suspension links
Vanquish servo armor
Method 2.2 wheels
Beef tubes front and rear.
Deuces 2 stage foams
Pitbull rock beast xor tires
Savox 1230 steering servo
Holmes revolver 540 1800 kv motor
Mamba Max pro esc
Axial 2 speed kit

What I'm unsure about:
Gearing
Size bec
Will I have any issues with all of this?
Is this setup good for what I'm wanting?

Any and all input is greatly appreciated.
Thank you.



Sent from my HTC6535LVW using Tapatalk
mklemp2015 is offline   Reply With Quote
Sponsored Links
Old 04-07-2016, 12:48 PM   #2
Quarry Creeper
 
Join Date: Dec 2015
Location: United States
Posts: 447
Default Re: My RR10 bomber build.

Scale Rigs Brand Specific Tech - Axial RR10 Bomber
Soldat Vaillant is offline   Reply With Quote
Old 04-07-2016, 10:06 PM   #3
I wanna be Dave
 
Join Date: Apr 2014
Location: North Carolina
Posts: 2,254
Default Re: My RR10 bomber build.

Welcome and congrats on the soon-to-be Bomber. A few things jump out at me:
1. The Revolver is a sweet motor (I have 2 of them), but I wouldn't recommend it for regular use in mud and creeks. Crud is likely to work its way into the revolving can and cause premature wear. Better to go with a brushed or sensored brushless inrunner. Run 3S with higher turn/lower kv, and gear down if needed to keep temps in line.
2. Your ESC and Servo aren't WP out of the box. You will either need to waterproof them (which voids the warranty, FYI) or get WP alternatives. The HH BLE ESC (available waterproofed) is an excellent alternative to the MMP, and the Holmes HV500 and Xpert 7701 are excellent WP servos with tons of torque and plenty of speed.
3. The stock trailing arms are weak, and I don't see any upgrades on your list. Either get the Axial reinforcement plates or pick up a set of aftermarket TAs (UCFab, VP, Blue Monkey).

Rock Beast XORs are fantastic with CI 2-stage foams.

Good luck and enjoy!
new2rocks is offline   Reply With Quote
Reply



My RR10 bomber build. - Similar Threads
Thread Thread Starter Forum Replies Last Post
Yoda's RR10 Bomber Build... B1B IFS! 84yoda Axial RR10 Bomber 80 04-03-2023 02:07 PM
bilinvic's RR10 Bomber Build bilinvic Axial RR10 Bomber 712 04-25-2020 08:09 AM
EmeryworX RR10 Bomber Build by cmbscx10 cmbscx10 Axial RR10 Bomber 59 07-12-2016 09:33 PM
nfcrockett's RR10 Bomber Build nfcrockett Axial RR10 Bomber 28 06-27-2016 08:24 PM
Forestbumpr's RR10 Bomber Build forestbumpr Axial RR10 Bomber 29 12-28-2015 09:12 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com