RCCrawler Forums

smc-93 · 10-14-2021, 11:37 AM

I modified a 1.55 "glue on" I found on Thingiverse and turned it into a face for a 1.7 three piece beadlock. https://www.thingiverse.com/thing:4944090

Using a different 1.9 beadlock I found (https://www.thingiverse.com/thing:4961434) that I didn't like the look of, I resized the rear half and clamp ring but I didn't like how wide the offset was.

These are the custom fount halves mounted on the rear of an RC4WD 1.7 wagon wheel with 1.7 Patigonia tires.

Would anybody be interested in me putting these on Thingiverse? For the record, I'm very new to CAD, these are far from perfect but I'm happy enough with how they turned out I wanted to share. When I have the time to fiddle with them some more, I want to sink them back down to 1.55 (I only had 1.7 tires available)

Sent from my LM-V600 using Tapatalk

Devwon · 10-14-2021, 08:53 PM

Nice work!

smog · 10-15-2021, 09:21 AM

I am not personally looking for something like this, but it is an excellent looking scale version of the trd off-road wheel, nice job!

smc-93 · 10-15-2021, 09:27 AM

I appreciate the compliments. Thank you!

I'm still working on printing a bunch of the Knights customs parts. I'll probably spend the weekend working on the drop bed.

Sent from my LM-V600 using Tapatalk

10-14-2021, 11:37 AM	#1
smc-93 Quarry Creeper Join Date: Jun 2018 Location: Blaine Posts: 466	Just want to show off a bit and see if anyone is interested I modified a 1.55 "glue on" I found on Thingiverse and turned it into a face for a 1.7 three piece beadlock. https://www.thingiverse.com/thing:4944090 Using a different 1.9 beadlock I found (https://www.thingiverse.com/thing:4961434) that I didn't like the look of, I resized the rear half and clamp ring but I didn't like how wide the offset was. These are the custom fount halves mounted on the rear of an RC4WD 1.7 wagon wheel with 1.7 Patigonia tires. Would anybody be interested in me putting these on Thingiverse? For the record, I'm very new to CAD, these are far from perfect but I'm happy enough with how they turned out I wanted to share. When I have the time to fiddle with them some more, I want to sink them back down to 1.55 (I only had 1.7 tires available) Sent from my LM-V600 using Tapatalk Last edited by smc-93; 10-14-2021 at 11:41 AM.

10-14-2021, 08:53 PM	#2
Devwon Rock Stacker Join Date: Jun 2017 Location: NoVA Posts: 80	Re: Just want to show off a bit and see if anyone is interested Nice work!

10-15-2021, 09:21 AM	#3
smog Slow is the new Fast Join Date: Nov 2013 Location: Winterpeg Posts: 2,906	Re: Just want to show off a bit and see if anyone is interested I am not personally looking for something like this, but it is an excellent looking scale version of the trd off-road wheel, nice job!

10-15-2021, 09:27 AM	#4
smc-93 Quarry Creeper Join Date: Jun 2018 Location: Blaine Posts: 466	Re: Just want to show off a bit and see if anyone is interested I appreciate the compliments. Thank you! I'm still working on printing a bunch of the Knights customs parts. I'll probably spend the weekend working on the drop bed. Sent from my LM-V600 using Tapatalk

Just want to show off a bit and see if anyone is interested - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A little bit TRX4, a bit more Crawler County	DrIsotope	Traxxas TRX-4	34	09-27-2021 08:48 PM
CAR SHOW/ HOT ROD SHOW this SUN 19th at FINISHLINE R/C	FinishLineRC	Colorado	2	09-15-2010 03:37 PM
Show me yours and ill show you mine	Crawln1221	General Crawlers	1	08-04-2009 07:14 PM
Show them to me noobs, show me the Emaxxs stock, well close	Jeepernick	Newbie General	15	01-11-2006 07:52 PM

Sponsored Links

RCCrawler Forums

Thread: Just want to show off a bit and see if anyone is interested