|
| LinkBack | Thread Tools | Display Modes |
03-08-2007, 12:12 PM | #1 |
Quarry Creeper Join Date: Mar 2006 Location: Juneau Alaska
Posts: 244
| Scale steering box setup?????
Well I got to thinking again after reading and posting in this thread about servo's and steering options. I came up with an idea for a scale steering box with a reduction and uses a standard servo. The idea uses a guitar tunner (modified of course), servo shaft with a u-joint. The tunner I have found in 4:1 and up to 16:1 and they are worm geared. As for a cost they range from 15 bucks to over 150 bucks To hook it up take off the thumb knob and install a set screw u-joint. Then put in a shaft to the servo with a shaft and u-joint. On the tunner shaft where the string would go put a pitman arm on and then you should have a scale steering boxset up. The servo might have to be hacked to be a constant turn with a pot placed someplece to center it agian if wanted. I think this is one for MicroGoat to try |
Sponsored Links | |
03-08-2007, 12:41 PM | #2 |
Quarry Creeper Join Date: Jan 2007 Location: I live in my own world,they know me here
Posts: 402
|
But remember folks,push pull steering is crap(in the real world)like the setup shown,but that shouldn't stop anyone from trying a crossover steering setup with these parts |
03-08-2007, 01:20 PM | #3 |
I wanna be Dave Join Date: Feb 2005 Location: Cleveland, OH
Posts: 8,009
|
Hmmmmmm....... |
| |