Can you post a pic of the slotting, and it this something you can do if I send in my motors? |
Quote:
|
Hey Can you give us a rough idea when you'll have another batch of 16t's ready. Thanks"thumbsup" Kieren |
I will take a pic of the slotting once this batch is done. I just have a half dozen more to wind today, and previous orders will be shipping by Wednesday. Once the current and previous orders for the 16t are filled I will put 10 more 16t on the site, so another batch will start on Wednesday. |
Ok, I think the refresh button might be getting a workout:ror: Thanks again"thumbsup" Kieren |
Quote:
Looks Like John's got two ready now. Get fast !!!!!! |
Well they are mine now! Thanks Kieren |
Quote:
Glad I can help. Quote:
|
Come on Wednesday!!!!!! Lolol |
Quote:
|
Broke the bit slotting the batch, so the next batch is on hold for a few more days. |
I think I can wait since these are the only parts of got for my new build:ror: Thanks for the update"thumbsup" Kieren |
Any more update's John? Thanks"thumbsup" Kieren |
I keep breaking bits, thats an update :lol: I think the cross screws on my mill may be worn out. I slotted the first 10 arms no sweat, then I started getting chatter. I have tightened the gibs and the nut but haven't been able to totally get rid of the vibrations. After I get through the waterproof ESC backorders today I will put a few more hours on the mill and see if I can work through it. If I can't I will have to send arms out for milling. |
Does that mean mine are done, since I got the early two:ror: Sucks though if you are having trouble with your mill though, hopefully you can get it fixed"thumbsup" Thanks Kieren |
The first ten were for team drivers and such before I put them on the site for sale, yours were not in that batch. |
Ok no worries, well hopefully you get things running right again though"thumbsup" Kieren |
Working hard to get this sorted or find someone that can. In the mean time I just got delivery of a little lot of 16t arms that were wound to my specs. Since I can't keep up with the winding and normal work myself, I can at least teach others how to do it and hire them for it. |
How do you think a pair of 11T 454's would go in an XR10, I have a new one here. Is it best just to order one more or do you do matched pairs? |
You can just order another one. Matching them based on RPMs is pretty easy. I don't have a dyno here that can run them anyway. The 11t works very well on 2s lipo. 3s may overheat it too quickly unless you are doing very short runs. |
JRH will you be getting any 500s back in stock? |
Nope, no more cans to be had. I am working on a suitable brushed replacement for them, as well as a brushless version. |
Hey. John Any word on the 454 motor yet its going on two weeks now Thanks |
Quote:
|
Any update when you will be able the slot the coms? |
I sent a batch of arms off to a more professional machinist for slotting, since I haven't been able to get clean cuts on my machine. I have plenty of 16t wound up here though, they are on the site now. 1beatjeep, if you want a substitution or refund at any time for the order just let me know. I certainly didn't expect to have the slotting cost so much time on my behalf, or else I wouldn't have offered them until I had a big batch already done. |
[QUOTE=JohnRobHolmes 1beatjeep, if you want a substitution or refund at any time for the order just let me know. I certainly didn't expect to have the slotting cost so much time on my behalf, or else I wouldn't have offered them until I had a big batch already done.[/QUOTE] hey John Ill wait thanks anyway |
How long are we looking at before they ship? Thanks"thumbsup" Kieren |
Just out of curiousity, how many amps would a 16T slotted 454 pull on 3 cells?? I am thinking of pairing these with a pair of Mamba Micro Max ESCs. |
I asked John this in the tech thread question, and I was told that either the mamba micro or micro sidewinder should be fine with the 16ts. However I wasn't told an amp draw as such. Kieren |
Quote:
That is enough of an answer....thanks much. |
Quote:
Quote:
Quote:
Quote:
Kieren |
Quote:
Yep....I found most of those posts before posting here. I just was looking for some sort of confirmation that the 454 16TS will work with Mamba Micro Pros. I have no complaints about my current motors, but am looking to shave more weight from my Bully V1 Rig. |
Actually I don't know if that's on 3s or 2s? JRH could you please clarify that? Thanks"thumbsup" Kieren |
3s. |
Thanks"thumbsup" Kieren |
Any word on the slotting? Thanks"thumbsup" Kieren |
Yeah I wonder too- ordered a 454 slotted fm the website. Thanks |
Just sent a email to the machinist that I sent em off to. He got caught up in the snow storm like I did and it put him a bit behind too. |
Hey john, I just got my 16 turn motors and wanted to know if they come timed at zero. I am guessing that the cans are from some 11 turns right? Thanks TY. |
All times are GMT -6. The time now is 06:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com