|
Re: HH Cobalt Puller- Reborn page 35! 1 Attachment(s) We are here, just down a worker since the fifth but almost caught up. I've been doing nothing but making armatures. We have cobalt puller brushes and 7t arms, but no springs left. Yesterday's batch, only another 20 to go! |
Re: HH Cobalt Puller- Reborn page 35! 1 Attachment(s) And last weeks work |
HH Cobalt Puller- Reborn page 35! John I sent you an email I think Monday for a new motor. When you have a minute please contact me. Don Sent from my iPhone using Tapatalk 2 |
Re: HH Cobalt Puller- Reborn page 35! Where do I get some brushes from? Also I have a 540 size 7t cobalt puller and I am trying to find a different brushed motor that will be close to it performance wise, I want to have something I won't feel bad running in the snow and stuff, any suggestions? |
Re: HH Cobalt Puller- Reborn page 35! Hello I have a ask for you do I need 2 Motors puller 500 which recommends me? is for mounting on double agent xr10 Thanks a greeting |
Re: HH Cobalt Puller- Reborn page 35! Installed my new pullers a couple of days ago and I have to say i'm impressed. Mine are the 30t flow 500's. Plenty of power and speed but still a smooth start plus I lost a little over 3oz off the berg. Thanks alot guy's awsome job! |
Re: HH Cobalt Puller- Reborn page 35! Quote:
|
Re: HH Cobalt Puller- Reborn page 35! |
Re: HH Cobalt Puller- Reborn page 35! Quote:
|
Re: HH Cobalt Puller- Reborn page 35! Is there any other motor that you offer that will give me performance that is close to the 540 puller? I want something that I can use for just playing around to be able to save the puller for use in events only to keep it alive longer. |
Re: HH Cobalt Puller- Reborn page 35! The Revolver S 540 would have equal startup and torque density, if you are into brushless motors. If you want to keep with brushed, there isn't anything else in the same class as the Puller 540. |
Re: HH Cobalt Puller- Reborn page 35! That's what I figured, thank you for the timely response even though your slammed "thumbsup" |
Re: HH Cobalt Puller- Reborn page 35! We just added ten pairs of 400s to the site Holmes Hobbies LLC My time for winding them is limited and we probably won't do another batch for 3 to 4 weeks, so if you want a set grab em. They typically sell quickly. |
Re: HH Cobalt Puller- Reborn page 35! order placed |
HH Cobalt Puller- Reborn page 35! Looking at 500 crawl 16 turn for a 9-10 pound 2.2 scaler. Would like a small esc and want to know if tekin fxr or hh br mini would work? Don't want to over heat Sent from my iPhone using Tapatalk 2 |
Re: HH Cobalt Puller- Reborn page 35! I know your a busy guy and all but I was wondering if you had got my email about the gearing with the OG 7T or 10T pullers? |
Re: HH Cobalt Puller- Reborn page 35! Where can I get one of your *Holmes 10t cobalt puller? If you can call or txt me at 559-363-2722 |
Re: HH Cobalt Puller- Reborn page 35! John I have a set of your 30t 500 motors. I am thinking about getting a set of the 30t 400 motors. What is going to difference in performance besides the weight. |
Re: HH Cobalt Puller- Reborn page 35! The smaller motors have less torque and power by about 25%. We are on hold for Puller 500s and 400s for a short period. We blew through the last 500 units faster than I could get more housings made. We are pursuing outside manufacturing along with in-house CNC production to avoid the issue from happening again. Thanks for loving these so much! |
Re: HH Cobalt Puller- Reborn page 35! Thanks. I'll stick with the 500's. |
| All times are GMT -6. The time now is 01:43 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com