RCCrawler Forums

yotachump · 04-01-2008, 08:38 PM

Since it seemed that everybody stopped making spools for the twin force/mad force I Had to do something about it.I will be offering CNC billet Spools.

Price and payment details are available in the vendors section.

Here is the vendor section Thread

http://www.rccrawler.com/forum/showt...17#post1157517

BlueMonster · 04-01-2008, 10:55 PM

Nice.

Reflection · 04-01-2008, 11:05 PM

Will they bolt up stock or will they require any special bearings or anything?

_BEN_ · 04-01-2008, 11:18 PM

Are these going to be inserts, will it replace the whole diffcasing and bolt to the ring gear, or is a 4/1 joke?

BlueMonster · 04-01-2008, 11:26 PM

Quote:

Originally Posted by _BEN_

or is a 4/1 joke?

Crap, forgot about that...

yotachump · 04-02-2008, 12:28 AM

Quote:

Originally Posted by raptorman57

Will they bolt up stock or will they require any special bearings or anything?

they will bolt up to stock. they will come with the bearing and o-ring required for installation.

Quote:

Originally Posted by _BEN_

Are these going to be inserts, will it replace the whole diffcasing and bolt to the ring gear, or is a 4/1 joke?

They will replace the whole diff casing. They are pretty much like the vertigo spools but you will use the stock drive cup pins, Unlike the vertigo spools. Also they are a little more beefy.

skid · 04-02-2008, 03:01 PM

Still a few manufactures making them. Nice to see a board member step up.

yotachump · 04-02-2008, 03:03 PM

Quote:

Originally Posted by skid

Still a few manufactures making them. Nice to see a board member step up.

Who? I haven't found one yet?
-Anthony

skid · 04-02-2008, 04:37 PM

Quote:

Originally Posted by yotachump

Who? I haven't found one yet?
-Anthony

Maximizer products. Local company here. Also sells through Tower, but it's only listed there for a Hellfire. Also fits the twin/mad force according to Max's site. Pretty sure it's the same one's I've been running for the past couple years.

Bart bender · 04-02-2008, 06:32 PM

They're actually mini spools. (from my sticky)

Chumps a vender too

. Hope to see the spools soon.

yotachump · 04-02-2008, 07:22 PM

Quote:

Originally Posted by Bart bender

They're actually mini spools. (from my sticky)

Chumps a vendor too

. Hope to see the spools soon.

Yea, I Saw the mini spools.I will be selling real spools

If we get a big enough list I will sell these, the more we get the cheaper they will be.

General Sherman · 04-02-2008, 11:12 PM

I'm in for a couple of spools depending on the cost
N.

mjderstine · 04-03-2008, 09:48 AM

im in too. i just blew my stock diff last ngiht! i need some beef in there now.

and i would order the gear case too!

Bart bender · 04-03-2008, 04:49 PM

Hook my up for a couple trucks, price pending. Any guesstimation on price?

yotachump · 04-03-2008, 07:15 PM

Quote:

Originally Posted by Bart bender

Hook my up for a couple trucks, price pending. Any guesstimation on price?

Tranny sections?

Bart bender · 04-04-2008, 04:55 PM

The whole shabang.

yotachump · 04-05-2008, 12:16 PM

Quote:

Originally Posted by Bart bender

The whole shabang.

See, I dont work or own a machine shop I just pay to get my parts made.The more we get made the cheaper each one will be. for 2 tranny sections (4pcs) it was $150,so I bet if i got 20 made We could get them down to $50 each section (2pcs). I guess I will start a list today.

Bart bender · 04-06-2008, 12:56 PM

Yah I thought that's what you did. Get a bunch of preorders or whatever and then have a batch made. Do you have a post in the Vender's section? You could go to Kyosho Monster and see if there would be any interest there too. Or Scale 4x4. Sorry if this is against the rules.

yotachump · 04-06-2008, 01:01 PM

Quote:

Originally Posted by Bart bender

Yah I thought that's what you did. Get a bunch of preorders or whatever and then have a batch made. Do you have a post in the Vender's section? You could go to Kyosho Monster and see if there would be any interest there too. Or Scale 4x4. Sorry if this is against the rules.

I will start one now in the vendors section.

I dont like to do preorders. I will just get a list of people, and then I will get a quote and have everybody pay me than I will get them made.

Edit, here is the link to the vendor section for the list, for the tranny section.

Twin Force Billet tranny sections

Bart Bender, if you have a scale 4x4 account could you please put this link on that site. I dont have an account on to that site. RCCrawler is my #1 and only rccrawling source

Bart bender · 04-12-2008, 02:40 PM

Totally missed this bud so sorry.

Kyosho Monster post

Scale 4x4 post

04-02-2008, 06:32 PM	#10
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	They're actually mini spools. (from my sticky) Chumps a vender too. Hope to see the spools soon.

04-12-2008, 02:40 PM	#20
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Totally missed this bud so sorry. Kyosho Monster post Scale 4x4 post Last edited by Bart bender; 04-12-2008 at 03:01 PM.

04-01-2008, 08:38 PM	#1
yotachump ghetto fabulous newbie Join Date: Sep 2007 Location: with your mom Posts: 2,526	Twin force/ Mad force spools are here Since it seemed that everybody stopped making spools for the twin force/mad force I Had to do something about it.I will be offering CNC billet Spools. Price and payment details are available in the vendors section. Here is the vendor section Thread http://www.rccrawler.com/forum/showt...17#post1157517 Last edited by yotachump; 04-24-2008 at 08:45 AM.

04-01-2008, 10:55 PM	#2
BlueMonster RCC Addict Join Date: Apr 2005 Location: Seattle Posts: 1,437	Nice.

04-01-2008, 11:05 PM	#3
Reflection TEAM MODERATOR Join Date: May 2004 Location: Tennessee Posts: 10,855	Will they bolt up stock or will they require any special bearings or anything?

04-01-2008, 11:18 PM	#4
_BEN_ Quarry Creeper Join Date: Jun 2007 Location: Torrance, CA. Posts: 282	Are these going to be inserts, will it replace the whole diffcasing and bolt to the ring gear, or is a 4/1 joke?

04-02-2008, 03:01 PM	#7
skid Rock Crawler Join Date: Nov 2004 Location: in a basement in Kalispell, MT Posts: 857	Still a few manufactures making them. Nice to see a board member step up.

04-02-2008, 11:12 PM	#12
General Sherman Newbie Join Date: Nov 2006 Location: Fairfield, CA Posts: 38	I'm in for a couple of spools depending on the cost N.

04-03-2008, 09:48 AM	#13
mjderstine SuperShafty.com Join Date: Jan 2008 Location: Visalia CA Posts: 2,902	im in too. i just blew my stock diff last ngiht! i need some beef in there now. and i would order the gear case too!

04-03-2008, 04:49 PM	#14
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Hook my up for a couple trucks, price pending. Any guesstimation on price?

04-04-2008, 04:55 PM	#16
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	The whole shabang.

04-06-2008, 12:56 PM	#18
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Yah I thought that's what you did. Get a bunch of preorders or whatever and then have a batch made. Do you have a post in the Vender's section? You could go to Kyosho Monster and see if there would be any interest there too. Or Scale 4x4. Sorry if this is against the rules.

Sponsored Links

RCCrawler Forums

Thread: **Twin force/ Mad force spools are here**

Thread: Twin force/ Mad force spools are here