Forced Wraith Got a couple boxes of parts from Eddie at Crawler Innovations here is the result. Wraith chassis Aluminum front mad force axle, centered HPI CVDs Egressor Knuckles Underdrive/over drive gears with AL spools (not sure of maker). 10 tooth axle pinion gear up front and 13 tooth axle pinion gear out back. Both have 43tooth ring gears. Fully built axial transmission with Crawler Innovations outputs, metal gears and BWD motor plate. Etc, etc First up setup the rear plastic axle for steering. Couple Supershafty parts for the axle mount. Homemade servo plate. http://img.tapatalk.com/d/14/01/19/eby3e9eg.jpg http://img.tapatalk.com/d/14/01/19/e7uhure3.jpg http://img.tapatalk.com/d/14/01/19/5ubu8aje.jpg http://img.tapatalk.com/d/14/01/19/ure5y5an.jpg http://img.tapatalk.com/d/14/01/19/vu6e7u2e.jpg One modded universal on left, CVDs on right. http://img.tapatalk.com/d/14/01/19/vazy6e8e.jpg Rear axle tore down and rebuilt. Rear panel will need trimmed. http://img.tapatalk.com/d/14/01/19/vymyja4y.jpg |
Forced Wraith Front axle servo/4link mounting fab. Cast front axle with Egressor knuckles and Supershafty link mounts. http://img.tapatalk.com/d/14/01/19/tusu5y7u.jpg http://img.tapatalk.com/d/14/01/19/eruvanaq.jpg http://img.tapatalk.com/d/14/01/19/aze3ynan.jpg http://img.tapatalk.com/d/14/01/19/umy7uhar.jpg http://img.tapatalk.com/d/14/01/19/unybyda2.jpg |
Forced Wraith Cleaned up and painted front axle and new servo/4 link mount. http://img.tapatalk.com/d/14/01/19/sarety6u.jpg Picture of the rear axle housing showing that the correct shims are a must on the axle pinion . http://img.tapatalk.com/d/14/01/19/e8e3asud.jpg Ready for the chassis. http://img.tapatalk.com/d/14/01/19/5ejyqe3e.jpg http://img.tapatalk.com/d/14/01/19/8e8amu7y.jpg |
Always liked the look of these axles - Reminds me of the big boy unimog axles. |
Re: Forced Wraith Quote:
|
Bulletproof trans http://img.tapatalk.com/d/14/01/20/tamu8yru.jpg http://img.tapatalk.com/d/14/01/20/3etery4y.jpg More work. http://img.tapatalk.com/d/14/01/20/havu6uju.jpg http://img.tapatalk.com/d/14/01/20/yvu2ygyj.jpg http://img.tapatalk.com/d/14/01/20/y2esevag.jpg http://img.tapatalk.com/d/14/01/20/tupyseze.jpg 4" shocks up front 5" shocks out back. Will need a little more longer shocks. http://img.tapatalk.com/d/14/01/20/hagege3u.jpg http://img.tapatalk.com/d/14/01/20/5emabesu.jpg |
Re: Forced Wraith Thats badass. Keep up the good work. |
Thanks. The pictures don't show it but I have quite a bit of work done on this rig. A lot of little custom stuff to make everything work. This rig will be a fun bashing trail rig. I am pretty much done with it and there are some minor things left to do. Possible wheels. http://img.tapatalk.com/d/14/01/20/e7y2ajut.jpg Possible wheels and tires. http://img.tapatalk.com/d/14/01/20/tavabyde.jpg |
Re: Forced Wraith I wish Eddie would start producing and selling those tires Truck looks great I have one myself and love it It fly's and bashes like crazy cuz that chassis is so light Can wait to see some video Regards Rick |
Re: Forced Wraith Quote:
|
Quote:
He'll be bashing on it for sure. That front axle housing just may be Eddie-Bashing-proof. Im sure 4s will be used. Quote:
These axles are solid. rear gears are underdrive and fronts are over drive. The ring gears are both 43t but the front pinion is 9t and the rear is 10 (i think), i cant remember the tooth count. |
Re: Forced Wraith The housings look like old rc4wd. New Era is the only other company I no of that built housings. Rig looks good. |
Re: Forced Wraith Quote:
|
Re: Forced Wraith http://www.rccrawler.com/forum/kyosh...num-axles.html These are the New Era axles. |
Quote:
RC4WD it is then. |
Re: Forced Wraith pretty awesome dude. the front axle is awesome. always wish i would have jumped on them before they sold the last sets. this will be fun man. where did you find a 9t pinion? |
Forced Wraith Quote:
Eddie sent me a ton of HPI parts that work for these axles. Gears, CVDs, Universals, etc. I have another planned build with some force axles. One of a kind old school German torsion chassis. |
Re: Forced Wraith can't wait to see what that is! i dont have a stock twin force anywhere. closest is the BYB, but even that is heavily modded. to me a twin force axle does its best in custom builds. i love all the sets i have. |
Re: Forced Wraith Awesome work as usual Shane! None of these projects would be coming to fruition with out. Thank you. You are gaining a wealth of axle knowledge from several different manufactures, both large & small, as well as time periods. You are building an extensive and impressive list of rigs built by you on your resume :mrgreen: |
Re: Forced Wraith Quote:
Quote:
|
All times are GMT -6. The time now is 07:07 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com