RCCrawler Forums

WesTX · 02-22-2016, 05:47 PM

What shafts are those? and yeti XL knuckles?

Wes

twissted · 02-22-2016, 06:19 PM

Modified losi drivline axles and yes Yeti XL knuckles.

vwmopar · 02-22-2016, 10:53 PM

Looks like there is built in camber?

twissted · 02-22-2016, 10:53 PM

Yup there is.

twissted · 02-23-2016, 06:54 AM

I slapped on

WesTX · 02-23-2016, 07:37 AM

Quote:

Originally Posted by twissted

I slapped on the 23mm hubs and the 1/5 wheels to show how much throw was possible. The offset of these wheels is wrong for this set up. I will be using 17mm hubs with a wide stance so the offset wheels will be much different.

Here are the ones that I will be using for this build.

got a shot from the front on how bad the camber looks?

Wes

twissted · 02-23-2016, 10:33 PM

I'll get the lower

twissted · 02-25-2016, 03:34 PM

So I have some

WesTX · 02-25-2016, 06:25 PM

I have a ton of different axles coming in to try as well. Will report back.

Wes

twissted · 02-25-2016, 11:16 PM

Quote:

Originally Posted by WesTX

I have a ton of different axles coming in to try as well. Will report back.

Wes

Sweet

twissted · 02-26-2016, 09:54 AM

Kyoshos are cool

twissted · 02-26-2016, 04:02 PM

I need to have my head checked.
The rear got a new face-lift!

twissted · 02-26-2016, 04:38 PM

The sleeve

twissted · 02-26-2016, 04:40 PM

All I have left

twissted · 02-26-2016, 06:19 PM

So after cutting

twissted · 02-26-2016, 08:48 PM

Welding starts tomorrow.

twissted · 02-27-2016, 03:28 PM

I had to run and do a a plumbing job today but I was able to the welding when I got home.

twissted · 02-27-2016, 09:38 PM

Freestyle rc

WesTX · 02-29-2016, 07:52 AM

https://www.dollarhobbyz.com/product...iversal-shafts

Those are just about 5mm too long for a short side, but could be easily cut and welded for either side or custom width. Just ordered some, the stub works perfect with the stock knuckle.

Wes

twissted · 02-29-2016, 09:56 AM

So The axle shafts

02-22-2016, 05:47 PM	#61
WesTX Rock Crawler Join Date: Jul 2008 Location: Pearland, TX Posts: 595	Re: How to: Building custom width Twin/Mad Force axle What shafts are those? and yeti XL knuckles? Wes

02-22-2016, 06:19 PM	#62
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle Modified losi drivline axles and yes Yeti XL knuckles.

02-22-2016, 10:53 PM	#63
vwmopar Gold Star Baby! Join Date: Jul 2011 Location: Warren, MI Posts: 269	Re: How to: Building custom width Twin/Mad Force axle Looks like there is built in camber?

02-22-2016, 10:53 PM	#64
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle Yup there is.

02-23-2016, 06:54 AM	#65
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle I slapped on Last edited by twissted; 11-05-2016 at 02:49 PM.

02-23-2016, 10:33 PM	#67
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle I'll get the lower Last edited by twissted; 11-05-2016 at 02:49 PM.

02-25-2016, 03:34 PM	#68
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle So I have some Last edited by twissted; 11-05-2016 at 02:50 PM.

02-25-2016, 06:25 PM	#69
WesTX Rock Crawler Join Date: Jul 2008 Location: Pearland, TX Posts: 595	Re: How to: Building custom width Twin/Mad Force axle I have a ton of different axles coming in to try as well. Will report back. Wes

02-26-2016, 09:54 AM	#71
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle Kyoshos are cool Last edited by twissted; 11-05-2016 at 02:51 PM.

02-26-2016, 04:02 PM	#72
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle I need to have my head checked. The rear got a new face-lift! Last edited by twissted; 11-05-2016 at 02:51 PM.

02-26-2016, 04:38 PM	#73
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle The sleeve Last edited by twissted; 11-05-2016 at 02:52 PM.

02-26-2016, 04:40 PM	#74
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle All I have left Last edited by twissted; 11-05-2016 at 02:52 PM.

02-26-2016, 06:19 PM	#75
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle So after cutting Last edited by twissted; 11-05-2016 at 02:52 PM.

02-26-2016, 08:48 PM	#76
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle Welding starts tomorrow. Last edited by twissted; 11-05-2016 at 02:52 PM.

02-27-2016, 03:28 PM	#77
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle I had to run and do a a plumbing job today but I was able to the welding when I got home.

Sponsored Links

02-27-2016, 09:38 PM	#78
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle Freestyle rc Last edited by twissted; 11-05-2016 at 02:53 PM.

02-29-2016, 07:52 AM	#79
WesTX Rock Crawler Join Date: Jul 2008 Location: Pearland, TX Posts: 595	Re: How to: Building custom width Twin/Mad Force axle https://www.dollarhobbyz.com/product...iversal-shafts Those are just about 5mm too long for a short side, but could be easily cut and welded for either side or custom width. Just ordered some, the stub works perfect with the stock knuckle. Wes

02-29-2016, 09:56 AM	#80
twissted I joined the Band! Join Date: May 2006 Location: Between a rock and a hard spot! Posts: 1,786	Re: How to: Building custom width Twin/Mad Force axle So The axle shafts Last edited by twissted; 11-05-2016 at 02:53 PM.

RCCrawler Forums

Thread: How to: Building custom width Twin/Mad Force axle