New Locked Up RC Scale Hub options!

[Locked Up]

Originally Posted by extremerc1

Hi patrick

I got a some question.~

which use original scale hub or pro scale hub to

my rig in above picture??

rc4wd trex60 axle + vq slw hex hub 600+1.9 rock cutter SLW = ???

would you tell me ~~ please ^^

The standard and the Pro are both the same diameter, so as long as your shafts have enough sticking past the nut you could use either. I say that because the standard style use whatever sticks past your nut to thread on after the nut, whereas the Pro will replace the nut.


I recommended the Pro Hubs for Mayhem wheels because they would need to be turned down a hair and the standard hub cover style would get pretty thin doing that since the back is machined out to cover a nut.

[muddywaters]

Originally Posted by Locked Up

Our current hubs are a hair too large for the Mayhem stuff.

Based on their 2.2 I have here ... If you have some sand paper you could probably use the Pro Hubs and grind them down. Chuck up an axleshaft in your drill, screw the hub on and just hold the sand paper on the outside until it fits. My hand measurements say you would need to shave off about .4mm (from total diameter) to get them to fit. So it's not much.

We will have some narrower hubs coming out but I do not have an ETA on them right now.

Awesome Patrick and thanks for the info I'm going to do that and I'll hit you up on how they fit. Thanks again for the info and the idea.

[extremerc1]

Originally Posted by Locked Up

The standard and the Pro are both the same diameter, so as long as your shafts have enough sticking past the nut you could use either. I say that because the standard style use whatever sticks past your nut to thread on after the nut, whereas the Pro will replace the nut.


I recommended the Pro Hubs for Mayhem wheels because they would need to be turned down a hair and the standard hub cover style would get pretty thin doing that since the back is machined out to cover a nut.

Thanks for your guide.
So I odered to prohub.
Have nice day

[Locked Up]

Let me know how they work out!