|
| LinkBack | Thread Tools | Display Modes |
10-23-2015, 03:21 PM | #1 |
SCALE PERFORMANCE PARTS Join Date: Oct 2007 Location: Cedar Park
Posts: 5,453
| NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings No available are our High Steer Zero Ackermann Knuckles, Clockable C Hubs and Oversize Bushing set, for SCX10/AX10s. Our knuckles help move your tie rod and drag link up closer to your chassis and out of the rocks. This give you a better approach which helps you to avoid more obstacles in most cases. They are also zero ackermann which means you will be able to dial in 100% steering throw to both sides. The Clockable C Hubs are, well, .... clockable to give you 12.5* of additional caster. The aluminum construction means they will out last your stock plastic parts and they are a great combination when used with the above knuckles. To go with our knuckles and c hubs, we are also offering oversize bushings. Your stock bushings will work just fine with our setup, but if you are looking for the usual, tight, LURC fit, these bushings will remove all of the play commonly found when using the stock flange pipe bushings. Here is everything shown together... Thanks for reading! Last edited by Locked Up; 11-18-2015 at 02:52 PM. |
Sponsored Links | |
10-23-2015, 04:34 PM | #2 |
Quarry Creeper Join Date: Mar 2009 Location: Central WA
Posts: 354
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings
Max steering angle?
|
10-23-2015, 07:09 PM | #3 |
I wanna be Dave Join Date: Jan 2005 Location: Raleigh-ish vicinity
Posts: 3,846
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings |
10-23-2015, 08:06 PM | #4 |
RCC Addict Join Date: Dec 2009 Location: Laceys Spring, Alabama
Posts: 1,067
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings
Nice. LURC continues to offer more awesome products. I'm getting my order in!
|
10-23-2015, 08:15 PM | #5 |
Quarry Creeper Join Date: Mar 2009 Location: Central WA
Posts: 354
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings |
10-23-2015, 08:53 PM | #6 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings |
10-23-2015, 09:21 PM | #7 |
Quarry Creeper Join Date: Mar 2009 Location: Central WA
Posts: 354
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings |
10-24-2015, 01:34 PM | #8 |
SCALE PERFORMANCE PARTS Join Date: Oct 2007 Location: Cedar Park
Posts: 5,453
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings |
10-24-2015, 06:36 PM | #9 |
I wanna be Dave Join Date: Dec 2006 Location: Where the sheep run scared.
Posts: 3,008
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings
Patrick.........You the man It's true I'm a dedicated LURC FanBoy (Man) for good reason. LURC produces my favorite scale products and have the best customer service in the industry. I don't need the new knuckles, C's, and bushing's currently but I will sale my vanquish setup so I will. |
11-04-2015, 11:56 AM | #10 |
SORRCA Committee Member Join Date: Dec 2008 Location: Parkston, SD
Posts: 4,523
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings
Got my C's and knuckles installed! Perfect fit! Quality is bar none, great job Patrick. Still need to put the brass bushing in. Also pictured is the panhard axle mount and three link truss from the LURC Pro CMS kit. Last edited by R2j; 11-05-2015 at 03:56 PM. |
11-08-2015, 01:52 PM | #11 |
I wanna be Dave Join Date: Dec 2006 Location: Where the sheep run scared.
Posts: 3,008
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings
I can't hold off any longer. I want the entire combo. Bushings,chub's,knuckles. Get ready to receive more of my money Patrick. Can I just start a running tab? |
11-17-2015, 05:17 PM | #12 |
SCALE PERFORMANCE PARTS Join Date: Oct 2007 Location: Cedar Park
Posts: 5,453
| Re: NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings
Couple of pics as requested of the fitment between the knuckle & a beadlock (Axial 1.9 with a LURC narrow hex & LURC inner ring): |
NEW - SCX10 Knuckles, Clockable C Hubs & Oversize Bushings - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SCX10 knuckles & C hubs | tokdl | Axial SCX-10 | 27 | 03-03-2014 09:40 AM |
| |