| |
04-25-2012, 02:04 PM
| #1 |
| Quarry Creeper Join Date: Jul 2008 Location: Lawton
Posts: 441
|  lipo help
I got a few zippy 350mah 2s batterys and i must be doing something wrong charging because I'm only getting about 2 minutes of runtime. I put them on my thunder ac6 charger and put it on balance charge and it went to 7.4v everytime i tried. I tried disharging them first too. Is 6v as low as i should discharge them too?
|
|  |
| Sponsored Links | |
| | |
|
04-25-2012, 02:29 PM
| #2 |
| Newbie Join Date: Apr 2012 Location: Annapolis
Posts: 17
| Re: lipo help
A full charge for a 2S lipo is 8.4V, or 4.2V per cell. You should never discharge the battery below 3.2V per cell, or 6.4V total. 6V is too low and can damage the battery.
|
|
| |
|
04-25-2012, 03:06 PM
| #3 |
| Quarry Creeper Join Date: Jul 2008 Location: Lawton
Posts: 441
| Re: lipo help
Is 0.2a ok to charge at...i guess its amps but I'm not 100% lol
|
|
| |
|
04-25-2012, 05:36 PM
| #4 | |
| Newbie Join Date: Apr 2012 Location: Annapolis
Posts: 17
| Re: lipo help Quote:
Russ | |
|
| |
|
04-25-2012, 07:06 PM
| #5 |
| Quarry Creeper Join Date: Jul 2008 Location: Lawton
Posts: 441
| Re: lipo help
Thanks for the info man. I think my batterys are ok. they seem to be charging up ok now lol i dont know why i didnt just ask this before i tried doing it on my own. thanks again |
|
| |
|
04-25-2012, 08:05 PM
| #6 |
| I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: lipo help
to get a full charge I always charge at a few MAH less than the battery is rated.
|
|
| |
 |
| |
Linear Mode
