|
| LinkBack | Thread Tools | Display Modes |
11-20-2008, 12:15 AM | #1 |
Sr. Product Developer Join Date: May 2005 Location: Fontana
Posts: 786
| Some Aluminum goodies and other stuff for your Losi MRC
Hey guys more pimping of the Losi parts. All the aluminum parts are very close to production and should be shipping to dealers by the 2nd week of Dec....yes I've hurt myself with some dates in the past, but feeling really good about these. Batteries are not my project so i can't be positive on the ship date. All the Aluminum parts are anodized a dark gun metal gray color. LOSB1423 Aluminum 1 Pc Rear Lock out hubs. Note that the lower mounting screw holes are counter sunk for better clearance. LOSB1416 30 Degree High Clearance Lower Links LOSB1411 Aluminum Spindle Set (yes they fit either plastic or Aluminum Carriers ;) ) LOSB1412 Aluminum Front Carrier Set (These also fit correctly) Note that the lower holes will have countersunk screws for better ground clearance. LOSB1402 Lower Skid Plate LOSB1424 Axle, Stainless Steel (1pc Hub set). These are the exact and direct replacement axles for the 1pc lock outs. LOSB9831 7.4V 600mAh 2S2P 20C Lipo This works with the LOSB1420 Graphite Servo/Battery Tray. LOSB9631 7.4V 600mAh Lipo/Charger Combo (Again designed to work with the LOSB1420) Thanks again all for the support, Rich |
Sponsored Links | |
11-20-2008, 01:00 AM | #2 |
Rock Crawler Join Date: Apr 2008 Location: On the Snap on truck
Posts: 736
|
Nice , but the skid should have been made out of delrin,any word about the shocks release date?
|
11-20-2008, 06:47 AM | #3 |
TN State Champ 11,12,13 Join Date: Oct 2008 Location: KTM Talk.com
Posts: 1,796
|
Great to see Losi making their own aluminum parts. I have read posts from others who had ordered aluminum c's and knuckles from other companies only to find out that they had to be "modified" to work correctly. I want those bent links. I will be adding those to my Christmas list |
11-20-2008, 07:25 AM | #4 |
Pebble Pounder Join Date: Oct 2004 Location: Southern Wisconsin
Posts: 187
|
Are the bent links going to be sold as a set of 2 or 4 under that part number?
|
11-20-2008, 08:47 AM | #5 |
Sr. Product Developer Join Date: May 2005 Location: Fontana
Posts: 786
| |
11-20-2008, 08:53 AM | #6 |
Rock Crawler Join Date: Apr 2008 Location: On the Snap on truck
Posts: 736
| |
11-20-2008, 09:26 AM | #7 |
Pebble Pounder Join Date: Sep 2005 Location: So Cal
Posts: 121
|
very nice!! |
11-20-2008, 10:18 AM | #8 |
'08 2.2 National Champ Join Date: Nov 2006 Location: UTRCRC
Posts: 5,585
|
Do you have a release date for this stuff. Tons of great stuff coming out and I would rather stick with the real Losi upgrades.
|
11-20-2008, 10:22 AM | #9 |
RCC Addict Join Date: Dec 2004 Location: Behind the wheel of an Axial R/C
Posts: 1,921
|
Nice!!! This is exactly what I've been waiting for, some good genuine Losi upgrades. Got the wheels and lockers this week and they look sick!!! I didn't think being broke would be this much fun. Thanks Losi Last edited by NaZ-T; 11-20-2008 at 10:25 AM. |
11-20-2008, 10:32 AM | #10 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
|
Haha being an engineer I am very used to giving due dates against my will. The counterbored holes on the rear axle locksout is a great idea. The bent links are cool too. I just wish they were offered in other colors. Is that in the future? I just might have to try Lipo for the first time with the crawler. I don't have a charger, though and I'm not willing to wait as long as a wall charger takes. Any chance Losi is going to offer a 4-link setup to get rid of the upper plastic link? |
11-20-2008, 03:15 PM | #11 |
SCALE PERFORMANCE PARTS Join Date: Oct 2007 Location: Cedar Park
Posts: 5,453
|
Those are all great parts and I'm sure I'll be ordering a few of them. What size is the Lipo? More importantly ... Do you intend to make some CVDs for the front? Seeing as how I can't run a dig for competitions I'd really love to have a better turing radius. |
11-20-2008, 06:40 PM | #12 |
RCC Addict Join Date: May 2005 Location: Auburn, WA
Posts: 1,191
| I don't even run comps (not that a certain local group feels recognizing the 1.9 class is necessary anyway :-( ) and I'd like the thing to turn tighter. I don't want to go 4ws just because I might someday get a wild hair and want to compete.
|
11-20-2008, 11:11 PM | #13 |
RCC Addict Join Date: Nov 2008 Location: never been
Posts: 1,317
|
the spindle and carrier set are nice, cant wait for these to come out.
|
11-21-2008, 12:38 PM | #14 |
Pebble Pounder Join Date: Oct 2007 Location: on top of a rock
Posts: 135
|
Rich, Looks like nice stuff, but do you know if anyone is working on CV joint front axles to help out in the turning Last edited by MrH; 11-21-2008 at 12:40 PM. |
11-21-2008, 02:58 PM | #15 |
Sr. Product Developer Join Date: May 2005 Location: Fontana
Posts: 786
|
CV's are on the way, we should have info on line in the next week. Otherwise i don't have a part number or price that I can post. If you're a dealer, don't bother calling HH, they do not have the info just yet. Thanks again, Rich |
11-21-2008, 05:27 PM | #16 | |
SCALE PERFORMANCE PARTS Join Date: Oct 2007 Location: Cedar Park
Posts: 5,453
| Quote:
I guess I can stop trying to figure out how to modify some other ones to wedge in there. | |
12-02-2008, 02:59 PM | #17 |
RCC Addict Join Date: Dec 2004 Location: Behind the wheel of an Axial R/C
Posts: 1,921
|
Rich, Do the Straight Axles (Losb1424) work with the stock plastic rear hubs? Do you guys have a part # on the CV's yet? Thanks |
12-02-2008, 04:45 PM | #18 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
|
These parts are awesome and I want them all, but I wish they'd come in different colors. Offering blue, red, and black would be nice. That way they'd match the stock wheels and bodies.
|
12-02-2008, 09:57 PM | #19 |
RCC Addict Join Date: Nov 2008 Location: never been
Posts: 1,317
|
will the losi lipo battery be enough to power a hitec 645 servo thru a tekin FXR and a JRH MTM ?
|
12-03-2008, 01:07 AM | #20 |
Newbie Join Date: Mar 2004 Location: Bend
Posts: 26
|
Are there any plans for an upgrade for the driveshaft/u-joint? Seems to be the next weak link.
|
| |