08-05-2009, 08:43 PM | #1 |
Rock Stacker Join Date: May 2009 Location: Desert
Posts: 89
| mamba 25
Is a mamba 25 and a 6800kv motor two much for a mrc.. Are any of you running this setup if so what did you have to do anything to your mrc to let it handle it?? Thanks |
Sponsored Links | |
08-05-2009, 08:56 PM | #2 |
Rock Crawler Join Date: Oct 2004 Location: The thumb
Posts: 788
|
I've got the 5400kv motor bolted up to the trans right now. Waiting for the L-trail chassis to put together. I'll be running 3 cell lipo so I'm curious also to this post. Either way we'll see how it goes.
|
08-06-2009, 04:25 AM | #3 |
Rock Crawler Join Date: Mar 2009 Location: Cottontown
Posts: 880
|
there is no such thing as too much. No seriously, if your gonna run that much then here are a few things I would suggest. Metal locker all around (front/center/rear) nut and bolt your axle halves together (it has become apparent that the axle halves seperate under pressure) buy an extra set of drive-shafts (some have trouble with the stockers twisting in half) you could also just upgrade to the mip or punisher driveshafts aluminum hexes. Other than those few things, all i would reccommend is making sure you have your slipper set correctly. |
08-08-2009, 02:27 AM | #4 |
Rock Stacker Join Date: Aug 2009 Location: Hawaii
Posts: 59
|
My friend is running the Mamba 25 w/ 6800 motor. It's definitely not too much power. If anything a good amount of power. The only downside is the drag brake at maximum on the Mamba 25 is extremely weak so using a brushed motor and another ESC might be better for crawling.
|
| |