RCCrawler Forums

Chaotic Crawlers · 11-29-2011, 10:00 PM

1.9 Chaotic Pro Bodiless Chassis

The 1.9 Chaotic Pro Bodiless Chassis was designed with the Losi Pro link geometry in mind. This chassis works with all stock Losi links or our upgraded titanium links. The Losi Pro chassis has been proven to out perform any chassis on the market. Now you can take it to the next level and get it bodiless...

If you love your Losi Pro chassis but wish it was bodiless here is your chance....

Includes:
2 1/8" Delrin Sideplates
2 1/16" Delrin Cab Sideplates
35mm wide Skid - Drilled for trans
6 - 35mm Delrin Standoffs (Drilled and Tapped)
8 - Cab spacers (Drilled Thru)
Black Oxide Hardware
Transmission Screws Included

Chaotic Crawlers · 11-29-2011, 10:01 PM

Mini Pro Chassis now In Stock and shipping on
our website.... as of 11/29

www.chaoticcrawlers.com

xgerstandtx · 11-30-2011, 12:12 AM

Are you going to have the chassis topper seperatly? and will it bolt on to the stock carbon chassis?

ittybitty · 11-30-2011, 07:47 AM

Quote:

Originally Posted by xgerstandtx

Are you going to have the chassis topper seperatly? and will it bolt on to the stock carbon chassis?

Then you wouldn't have a "hood"

Chaotic Crawlers · 11-30-2011, 10:03 AM

The topper will not be available separately. It won't bolt up and it will not meet bodiless spec requirements without the lower section.

EverettY · 11-30-2011, 03:03 PM

Are there any build threads for these yet? Or do you now of any coming soon? Love Planning on Getting one when after I get my XR running

HARDKNOCKZ · 11-30-2011, 03:10 PM

I'll have my thread started soon. I can tell you...this chassis KILLS it!!! It has made me excited about the 1.9 class again. We have our 2nd season opener

this Saturday so after that...I'll get my build thread pics together.

Thanks for the hook up Marc.

J.D.

EverettY · 11-30-2011, 03:15 PM

Quote:

Originally Posted by HARDKNOCKZ

I'll have my thread started soon. I can tell you...this chassis KILLS it!!! It has made me excited about the 1.9 class again. We have our 2nd season opener

this Saturday so after that...I'll get my build thread pics together.

Thanks for the hook up Marc.

J.D.

Can't wait to see the build. You are so lucking I wish I were sponsored. But I don't go to any comps.

sledheadd · 11-30-2011, 07:03 PM

Got mine ordered yesterday !!! It shipped today thanks.

asw27x · 11-30-2011, 07:56 PM

does this chassis kind of have the same geometry as the gc-3 i love my gc but i want to go bodyless and i like the look of this chassis?
and do you think i could run the gc-3 skid with it as well?

Chaotic Crawlers · 11-30-2011, 10:13 PM

Quote:

Originally Posted by asw27x

does this chassis kind of have the same geometry as the gc-3 i love my gc but i want to go bodyless and i like the look of this chassis?
and do you think i could run the gc-3 skid with it as well?

I have never had a gc3 in hand nor never seen one in person so I'm not sure it's link geometry. I'm going to guess the skid won't work. Our chassis includes a skid though.

Illeagle · 11-30-2011, 10:28 PM

Looks killer guys. I know paystin built one of these up and will be running it at our WestCoast comp this weekend. Not sure if he did a build thread on it yet or not. Im sure he is going to be hard to beat.

Chaotic Crawlers · 12-01-2011, 12:26 PM

Quote:

Originally Posted by Illeagle

Looks killer guys. I know paystin built one of these up and will be running it at our WestCoast comp this weekend. Not sure if he did a build thread on it yet or not. Im sure he is going to be hard to beat.

Thanks for the kind words....I know there are quite a few of these minis out there so we should see some builds soon.

This chassis is designed to virtually use no brain power. Just unbolt your Losi Pro and bolt on the Chaotic Pro bodiless and you should be ready to compete.

douwe · 12-01-2011, 12:53 PM

Damn, i recently build my mini pro with een BJ mini.. If i knew this....
This is candy for my eyes...

Illeagle · 12-01-2011, 03:07 PM

Quote:

Originally Posted by Chaotic Crawlers

This chassis is designed to virtually use no brain power.

You hear that Hardknockz? Right up your alley!

paystin · 12-01-2011, 03:36 PM

Quote:

Originally Posted by Illeagle

Looks killer guys. I know paystin built one of these up and will be running it at our WestCoast comp this weekend. Not sure if he did a build thread on it yet or not. Im sure he is going to be hard to beat.

I do have mine built and for the limited (one battery pack) of time I have driven it, it is awesome.

Quote:

Originally Posted by Chaotic Crawlers

Thanks for the kind words....I know there are quite a few of these minis out there so we should see some builds soon.

This chassis is designed to virtually use no brain power. Just unbolt your Losi Pro and bolt on the Chaotic Pro bodiless and you should be ready to compete.

I will get my build thread going this weekend. Damn work is killing my fun time.

Quote:

Originally Posted by Illeagle

You hear that Hardknockz? Right up your alley!

asw27x · 12-01-2011, 04:03 PM

Quote:

Originally Posted by Chaotic Crawlers

I have never had a gc3 in hand nor never seen one in person so I'm not sure it's link geometry. I'm going to guess the skid won't work. Our chassis includes a skid though.

i know it will come with a skid but what i like about the gc-3 one is its slightly narrower and getts the links closer together

ween · 12-02-2011, 03:05 AM

Been running mine a bit and had a question.

I've got some binding on my springs at the front with full lock, have you been using any widening solution to add clearance? I'm using Losi aluminum hubs which look a mm or so thinner than standard.

Chaotic Crawlers · 12-02-2011, 11:43 AM

Quote:

Originally Posted by ween

Been running mine a bit and had a question.

I've got some binding on my springs at the front with full lock, have you been using any widening solution to add clearance? I'm using Losi aluminum hubs which look a mm or so thinner than standard.

Do you have a pic?
I'm sure we can figure it out once we can see your issue.

ween · 12-02-2011, 05:03 PM

PM sent, much appreciated!

11-29-2011, 10:00 PM	#1
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Chaotic Pro Bodiless Chassis...Proven Winner 1.9 Chaotic Pro Bodiless Chassis The 1.9 Chaotic Pro Bodiless Chassis was designed with the Losi Pro link geometry in mind. This chassis works with all stock Losi links or our upgraded titanium links. The Losi Pro chassis has been proven to out perform any chassis on the market. Now you can take it to the next level and get it bodiless... If you love your Losi Pro chassis but wish it was bodiless here is your chance.... Includes: 2 1/8" Delrin Sideplates 2 1/16" Delrin Cab Sideplates 35mm wide Skid - Drilled for trans 6 - 35mm Delrin Standoffs (Drilled and Tapped) 8 - Cab spacers (Drilled Thru) Black Oxide Hardware Transmission Screws Included Last edited by Chaotic Crawlers; 11-09-2012 at 12:30 AM.

11-30-2011, 07:56 PM	#10
asw27x RCC Addict Join Date: Apr 2010 Location: Ringwood Posts: 1,233	does this chassis kind of have the same geometry as the gc-3 i love my gc but i want to go bodyless and i like the look of this chassis? and do you think i could run the gc-3 skid with it as well? Last edited by asw27x; 11-30-2011 at 08:00 PM.

11-29-2011, 10:01 PM	#2
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Mini Pro Chassis now In Stock and shipping on our website.... as of 11/29 www.chaoticcrawlers.com

11-30-2011, 12:12 AM	#3
xgerstandtx RCC Addict Join Date: Aug 2007 Location: Marshalltown Posts: 1,003	Are you going to have the chassis topper seperatly? and will it bolt on to the stock carbon chassis?

11-30-2011, 10:03 AM	#5
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	The topper will not be available separately. It won't bolt up and it will not meet bodiless spec requirements without the lower section.

11-30-2011, 03:03 PM	#6
EverettY E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR Posts: 3,591	Are there any build threads for these yet? Or do you now of any coming soon? Love Planning on Getting one when after I get my XR running

11-30-2011, 03:10 PM	#7
HARDKNOCKZ Its a HARDKNOCKZ Life... Join Date: Feb 2011 Location: Southern Kali... Posts: 2,469	I'll have my thread started soon. I can tell you...this chassis KILLS it!!! It has made me excited about the 1.9 class again. We have our 2nd season opener this Saturday so after that...I'll get my build thread pics together. Thanks for the hook up Marc. J.D.

11-30-2011, 07:03 PM	#9
sledheadd Newbie Join Date: Nov 2011 Location: canada Posts: 10	Got mine ordered yesterday !!! It shipped today thanks.

11-30-2011, 10:28 PM	#12
Illeagle RCC Addict Join Date: Jan 2008 Location: Apple Valley,CA Posts: 1,172	Looks killer guys. I know paystin built one of these up and will be running it at our WestCoast comp this weekend. Not sure if he did a build thread on it yet or not. Im sure he is going to be hard to beat.

12-01-2011, 12:53 PM	#14
douwe Rock Crawler Join Date: Jul 2006 Location: The Netherlands Posts: 911	Damn, i recently build my mini pro with een BJ mini.. If i knew this.... This is candy for my eyes...

12-02-2011, 03:05 AM	#18
ween Newbie Join Date: Sep 2011 Location: Canberra, Australia Posts: 31	Been running mine a bit and had a question. I've got some binding on my springs at the front with full lock, have you been using any widening solution to add clearance? I'm using Losi aluminum hubs which look a mm or so thinner than standard.

12-02-2011, 05:03 PM	#20
ween Newbie Join Date: Sep 2011 Location: Canberra, Australia Posts: 31	PM sent, much appreciated!

Sponsored Links

RCCrawler Forums

Thread: Chaotic Pro Bodiless Chassis