06-19-2015, 12:36 PM | #1 |
RCC Addict Join Date: Jun 2007 Location: Finland
Posts: 1,544
| Vätte Vätte Vätte - Nordic Champion 2016 Vätte - European Champion 2015 Technical stuff: Chassis: DravTech SuDu Zero Axles: DravTech Mini axles Links: Lower links DravTech TI, uppers DravTech AL/CF Transmission: Team Losi Mini Crawler ESC: Tekin B1R Motor: Extreme 380X heli motor Servo: Protek 160T Battery: Turningy Nano-Tech 2S 300mAh 45-90C LiPo Radios: Sanwa/Airtronics MT-4 Tires: Purpmart 4.25" Mini Voodoos Rims: DravTech 1.9 Shocks: Axial SCX10 Aluminium (shortened) Springs: Team Losi Mini-T (Pink in front and Red in the rear) Drive Shafts: SDI Propeller Shafts (Shortened) Skins: Krawler Konceptz Else: Over- and underdrive in axles. CF Motor plate in transmission. Aluminium gears in transmission. RCBros spring cups. Last edited by Zarizi Tech; 06-28-2016 at 03:58 AM. |
Sponsored Links | |
06-19-2015, 12:38 PM | #2 |
RCC Addict Join Date: Jan 2009 Location: Bend
Posts: 1,577
| Re: Vätte
Do it...you know you want to.
|
09-07-2015, 07:56 AM | #3 |
I wanna be Dave Join Date: Sep 2009 Location: Eastcoast CANADA
Posts: 4,395
| Re: Vätte
Needs its dress |
09-17-2015, 11:04 AM | #4 |
DravTech Join Date: Aug 2012 Location: Sweden
Posts: 643
| Re: Vätte
A thread with few pictures is a boring thread, so lets fix that a little bit... My plan was to keep my last pair of the stainless spools for a project, but hey what don't you do for your team drivers Exceed 1/16 ring gears on the DravTech stainless spools for both the front and rear. For the front there is a Exceed 1/16 pinion gear on a modified Losi pinion shaft. I have grinded down the flange on the shaft. The Exceed shaft is a little bit bigger than the Losi one so I added a drop of Loctite 648 so it will not have any play. For the rear there will be a modified Axial gear giving it some underdrive. The transmission contain the HR aluminum gears. To avoid that the output shafts beats up the pocket in the aluminum gear I have added some Loctite 648 so now those shafts are going nowhere. The transmission housing also got one of the DravTech CF motor plate prototypes. The function is good, but I am not happy how it lines up with the housing yet. I have to send Samu a proper one when I have them ready As I hate M2 thread in plastic I had to mount some aluminum inserts in the bottom holes of the transmission housing. Transmission mounted on the SuDuZero skid. Just a skid is boring so lets add a chassis around it Then I had time to assemble the knuckles. Then time ran out for today, but this is up next . |
09-17-2015, 11:15 AM | #5 |
RCC Addict Join Date: Jun 2007 Location: Finland
Posts: 1,544
| Re: Vätte
Your building is always epic to follow! Now when it's my rig, it's even more exciting! Looks fantastic so far! I can't wait to see them axles and skins mounted together. It'll be one hell of a package! |
09-17-2015, 12:08 PM | #6 |
I wanna be Dave Join Date: Sep 2009 Location: Eastcoast CANADA
Posts: 4,395
| Re: Vätte
FIXED IT Your building is always epic to follow! Now when it's my rig, it's even more exciting! Looks fantastic so far! I can't wait to see them axles and skins mounted together. It'll be one COOL of a package! |
10-06-2015, 01:32 PM | #7 |
DravTech Join Date: Aug 2012 Location: Sweden
Posts: 643
| Re: Vätte
A little more done. Axles are coming together and next up is shimming the ring and pinion gear so I can start shortening the axles. The wheels are also assembled to be ready when the tires are done. . |
10-06-2015, 01:39 PM | #8 |
Rock Crawler Join Date: Jul 2006 Location: The Netherlands
Posts: 911
| Re: Vätte
Don't ship it to Samu.. He already has so much nice stuff. You know my address Verstuurd vanaf mijn D6503 met Tapatalk |
10-06-2015, 02:36 PM | #9 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Vätte
I was just about to post before you posted that asking for updates but I remembered you're busy so I didn't ask... Looking awesome
|
10-06-2015, 03:25 PM | #10 |
I wanna be Dave Join Date: Sep 2009 Location: Eastcoast CANADA
Posts: 4,395
| Re: Vätte
Skins on their way!
|
10-06-2015, 07:08 PM | #11 |
RCC Addict Join Date: Jan 2011 Location: somewhere near Los Angeles...or a city looking thingy.
Posts: 1,122
| Re: Vätte |
10-06-2015, 07:34 PM | #12 | |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Vätte Quote:
They are M3 threaded on the outside of the inserts and M2 threaded on the inside so you just drill the hole out for self tapping M3 screw and then just screw the inserts into it | |
10-07-2015, 12:22 AM | #13 | |
DravTech Join Date: Aug 2012 Location: Sweden
Posts: 643
| Re: Vätte Quote:
| |
10-10-2015, 05:48 PM | #14 |
RCC Addict Join Date: Jan 2011 Location: somewhere near Los Angeles...or a city looking thingy.
Posts: 1,122
| Re: Vätte
Ah, makes sense. Now to find some inserts. I'm sure my local bolt shop will have them, or mcmaster carr.
|
10-26-2015, 08:00 AM | #15 |
RCC Addict Join Date: Jun 2007 Location: Finland
Posts: 1,544
| Re: Vätte
I have received the first parts for this project for me! COOOOOOOOL skins by Krawler Konceptz. And these must needed tires from PURPMART! Thank you guys. Now I'm just crossing my fingers, that Tobias can make the rig complete it time. Cause training is only for the weak! |
10-26-2015, 11:58 AM | #16 |
RCC Addict Join Date: Mar 2012 Location: Under a Rock in North Texas
Posts: 1,389
| Re: Vätte
Anxious to see this rig finished! Looking great so far.....
|
10-28-2015, 05:58 AM | #17 |
DravTech Join Date: Aug 2012 Location: Sweden
Posts: 643
| Re: Vätte |
10-28-2015, 07:47 AM | #18 |
RCC Addict Join Date: Jun 2007 Location: Finland
Posts: 1,544
| Re: Vätte |
10-28-2015, 08:53 AM | #19 |
DravTech Join Date: Aug 2012 Location: Sweden
Posts: 643
| Re: Vätte
Doh!!! I meant EuroCrawl of course |
11-04-2015, 08:39 AM | #20 |
RCC Addict Join Date: Jun 2007 Location: Finland
Posts: 1,544
| Re: Vätte
Received batteries today! HK Nano-Tech 300mAh 2S 45-90C Jeeeez, these are small. |
| |