03-31-2014, 09:06 AM | #1 |
Newbie Join Date: Mar 2013 Location: Mid coast
Posts: 16
| April 12th
any interest on a fun run on saturday the 12th? im off from work, any thoughts on where?
|
Sponsored Links | |
03-31-2014, 11:47 AM | #2 |
Pebble Pounder Join Date: May 2013 Location: Nobleboro
Posts: 158
| Re: April 12th
im game for anything. sold the Subaru so I should have the spyder done by then. I really like Reid, not sure what the tides are though.
|
03-31-2014, 12:05 PM | #3 |
Rock Crawler Join Date: Oct 2013 Location: Wiscasset, ME
Posts: 623
| Re: April 12th
If we can do afternoon I'll be up for that I think. Like I said my mornings are all filled up. But don't do it on my account. Only if it works for the group. I know there will be lots of opportunities.
|
03-31-2014, 02:10 PM | #4 |
Newbie Join Date: Mar 2013 Location: Mid coast
Posts: 16
| Re: April 12th
low tide that day is at 4:12. perfect for an afternoon crawl, say 1pm! have to switch some things on the wraith for rocks but thats easy
|
03-31-2014, 04:13 PM | #5 |
Pebble Pounder Join Date: May 2013 Location: Nobleboro
Posts: 158
| Re: April 12th
Sounds good to me, unless someone comes up with a better idea. Hope to have the poison spyder done by then. Just ordered $220 in parts to finish it. thank god I sold my Subaru or I would have never finished it.
|
03-31-2014, 04:35 PM | #6 |
Rock Crawler Join Date: Oct 2013 Location: Wiscasset, ME
Posts: 623
| Re: April 12th
What did you end up with for the ESC and motor?
|
03-31-2014, 05:06 PM | #7 |
Pebble Pounder Join Date: May 2013 Location: Nobleboro
Posts: 158
| Re: April 12th
I already had the Teken rs and 17.5t brushless for the spyder. Have to wait a couple of weeks before I order the brushless for my emaxx. Forgot today was the oscama care sign up deadline. So didn't have enough to get it this week. But my poison spyder will be finished and that's good enough for me. |
03-31-2014, 05:52 PM | #8 |
Rock Crawler Join Date: Oct 2013 Location: Wiscasset, ME
Posts: 623
| Re: April 12th
Right. I knew you had the tekin... Such a bad memory. Anyways, for the emaxx I'd go with either the waterproof hobbywing for sensor less or the 150amp sensored. Both less than $100. I'll post some motors when i get home from work. About $60 bucks for a huge motor though. Or less for the sensorless. You can search hobbyking. Thats just me though. |
03-31-2014, 08:39 PM | #9 | |
Pebble Pounder Join Date: May 2013 Location: Nobleboro
Posts: 158
| Re: April 12th
I do appreciated the input Robert . Im still a little green with the brushless. Ive used the brushed for so long. Really like the rc4wd motors as well as novak. Good torque with7.2 volts. hope to have something in the emaxx in a few weeks. I'll let you know what I went with. Quote:
| |
04-04-2014, 01:28 PM | #10 |
Newbie Join Date: Mar 2013 Location: Mid coast
Posts: 16
| Re: April 12th
i have to work:( there was no way my boss could give me the day off but i can get out early. wont get down till 2ish
|
04-04-2014, 05:22 PM | #11 |
Pebble Pounder Join Date: Nov 2013 Location: Bath,ME
Posts: 159
| Re: April 12th
I should be able to do reid at 2:00.
|
04-04-2014, 06:13 PM | #12 |
Rock Crawler Join Date: Oct 2013 Location: Wiscasset, ME
Posts: 623
| Re: April 12th
im game for that too
|
04-05-2014, 06:35 PM | #13 |
Newbie Join Date: Mar 2012 Location: Brunswick, Maine
Posts: 38
| Re: April 12th
Sorry, I'll be in the North Maine Woods camping and crawling places that have never seen a crawler before.
|
04-09-2014, 07:00 PM | #14 |
Pebble Pounder Join Date: May 2013 Location: Nobleboro
Posts: 158
| Re: April 12th
Are we still on for sat @2?
|
04-09-2014, 07:58 PM | #15 |
Pebble Pounder Join Date: Nov 2013 Location: Bath,ME
Posts: 159
| Re: April 12th
Ya I'm in.
|
04-09-2014, 08:05 PM | #16 |
Rock Crawler Join Date: Oct 2013 Location: Wiscasset, ME
Posts: 623
| Re: April 12th
I'm out boys. Sorry. Can't wait for may tho!
|
04-09-2014, 08:14 PM | #17 |
Newbie Join Date: Mar 2013 Location: Mid coast
Posts: 16
| Re: April 12th
im still in. mounted some pit bulls (thank you handy) and lowered it a little. the wraith is ready for rocks!
|
04-09-2014, 09:37 PM | #18 |
Pebble Pounder Join Date: May 2013 Location: Nobleboro
Posts: 158
| Re: April 12th
Sweet, I know our rigs are different but the same, really want to see the comparison between the Pit bulls and the BFG Krawlers. Did manage to get finished pics up in my build thread. Have to spend some time rewiring the whole truck and get the bec and radio changed out. My driver should be here Friday so Saturday will be the big test. |
04-10-2014, 04:26 PM | #19 |
Pebble Pounder Join Date: May 2013 Location: Nobleboro
Posts: 158
| Re: April 12th
What ever became of compassarms? Notice he hasn't been posting lately. see you all Saturday. going to be a really nice day for some havoc!!!
|
04-11-2014, 05:19 PM | #20 |
Newbie Join Date: Mar 2013 Location: Mid coast
Posts: 16
| Re: April 12th
im ready!!!
|
April 12th - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
November G6² ON the 12th | DwaneO | New Mexico | 18 | 11-12-2011 04:44 PM |
1.9 1/12th scale Hummer H1 | DwaneO | 1.9 Scale Rigs | 22 | 05-21-2010 10:29 AM |
KFC "Double Down" coming April 12th! Bacon Sandwich Killer! | STANG KILLA SS | Chit Chat | 10 | 04-10-2010 09:18 PM |
CMRCRC Comp. #3 May 12th | dezfan | Competitions | 24 | 05-12-2007 09:12 PM |
any one know anything about 1/12th onroad? | murdock | Chit Chat | 10 | 06-12-2006 09:07 PM |
| |