03-25-2009, 02:37 PM | #1 |
Quarry Creeper Join Date: Jan 2009 Location: Hagerstown
Posts: 369
| I need a servo
Hey guys Sunday i burned up my HS7955 after about 5 mins of crawling on flat ground. I'm running 7.2 volts to it through my BEC. I need to send it back to Hitec but I don't think its going to be here in time to be ready for the next comp. Does anyone have a servo I could borrow for the next comp. That would be awesome if someone could do this. If I beat you with your own servo though you can't get mad but I doubt that will happen lol. So if someone could help me that would be awesome and if you don't want me running 7.2 volts through your servo I'll bump it down to 6. WHat really makes me mad is this servo is about 5 runs old and a ran it last thursday morning for like an hour and got it in binds and everything else so I dunno why it decided to crap out on me of flat ground. Ok thanks in adavance and if I could pick it up this weekend for some testing that would be awesome. |
Sponsored Links | |
03-25-2009, 07:00 PM | #2 |
Rock Crawler Join Date: Nov 2008 Location: SoCal
Posts: 861
|
I should have a spare in a few days if no one has one. It's a HSR-5995TG
|
03-25-2009, 08:03 PM | #3 |
RCC Addict Join Date: Nov 2008 Location: Frederick
Posts: 1,286
| The only non in use one I have is a stock Wk p.o.s. That dose blow but, dono't feel bad I was setting up my dig I bouth from Steve and that damm sevro went bad. I did not even have it in the not sure whats up with it. So I'll be mailing in to High-tec as well. Plus no dig again for this comp.:-( |
03-26-2009, 06:52 AM | #4 |
Quarry Creeper Join Date: Jun 2005 Location: Maryland
Posts: 319
|
Unfortunatly I think the fact that you are running 7.2v through it is maybe your problem. Some may run it without issue, but it is not rated at that. ???? The 5990 I run is rated at 7.2v Only one until the 7950 comes out. I have a few chessy servos, if all else fails. Not the best but they will work. |
03-26-2009, 04:27 PM | #5 |
Quarry Creeper Join Date: Jan 2009 Location: Hagerstown
Posts: 369
|
Thanks a lot guys. Yeah the 7955 is only rated at 7.2 but Zach has been running his at 9v forever and has never had an issue. I think when the 7950 comes out I'll pick it up and run my 7955 in my scaler if i ever get around to gettin one. If I could get a servo from one of you guys this weekend so I can practice Sunday that would be awesome I'm gonna turn my BEC back down to 6v.
|
03-26-2009, 06:19 PM | #6 |
Rock Crawler Join Date: Nov 2008 Location: SoCal
Posts: 861
|
The servo is in my 5T right now, but I bought a different servo for it, so when I receive it you can borrow it. I doubt it will be here by Sunday, but I will let you know. Thanks, Steve |
03-26-2009, 08:46 PM | #7 |
Quarry Creeper Join Date: Jun 2005 Location: Maryland
Posts: 319
|
it shows that it is actually only rated at 6.0v.
|
| |