Maryland Old School style 2.2 Comp

[Bottoms Up]

A few of us, have decided to get together and hold an "Old School" style 2.2 Comp
Maybe sometime later this year. Maybe Mid September or after.

Get your stuff together now.

USRCCA rules for Class 4 seemed like a good place to start

With 2 Exceptions
DIG ALLOWED.
PIN STYLE TIRES NOT ALLOWED.


2.5- Class 4 – Class 2.2 Shafty:
▪ 2.5.1 - Vehicle wheelbase is limited to a maximum of 12.5 inches.
▪ 2.5.2 - Vehicle track width is limited to a maximum of 12.5 inches. This is determined by measuring
the bottom of the outermost edge of the front and rear tires while the vehicle is sitting on level ground.
▪ 2.5.3 - Wheel/ rim is limited to 2.2 inch or smaller at the bead surface.
Wheels may be modified, provided that the tire bead surface does not exceed 2.2 inches in diameter.
With a tire mounted, no exterior component of the wheel, including but not limited to, the bead lock ring shall exceed 2.55".
▪ 2.5.4 -Tires may be modified from other sized tires using only a pliable rubber, but must not exceed a total uncompressed outer diameter of 6 inches.
▪ 2.5.5 - Vehicles are limited to 2-wheel steering only.
▪ 2.5.6 - Bodied Vehicles only. (See Sec. 2.3.6) Bodiless vehicles are prohibited.
▪ 2.5.7 - INTENTIONALLY DELETED
▪ 2.5.7 - Vehicles are limited to 1 ESC, 1 Motor & 1 Servo + (DIG SERVO ALLOWED)
▪ 2.5.8 - Bodies must be 3” minimum height on sides. No less than 12.5”
total length and full original width, and no less than 5” in center.



WHO'S IN ?

[CronusTRD]

Count me in. I have enough space to host at my small farm. I have enough rock and materials for 3 to 4 courses.

sykesville area

[Bottoms Up]

Yep, I have tons of rock outcroppings on my lot.

or we can always do, Sugarloaf, or Doubs, or somewhere else public.

[BoilerUp]

New to the scene. Sounds like a lot of fun! Don't have a 2.2 rig but I'd be interested in spectating. I have a mildly modified scx10. I'm in the Frederick area.

-Evan

[Bottoms Up]

Evan, I'm in Frederick too, I have a nice little spot across the street for scalers to run.

[BoilerUp]

Looks like a real good time!! I haven't had my rig long but I've found a few good places to wheel up at Cunningham Falls. I really enjoy the technical rock sections. I'll stay tuned for more info; would enjoy watching a competition as I've never been to one.

[KBrog]

I got excited when I read the thread title. I thought it was going to be a 2.2pro style comp. Oh well.

[Bottoms Up]

We can do that too at the same time. A few of us still have Pro trucks too.
Infact, the first one might be open run what ya brung.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[youngblood]

Looking forward to friendly comp some time in September. I'm collecting parts for this!

[KBrog]

Originally Posted by Bottoms Up

We can do that too at the same time. A few of us still have Pro trucks too.
Infact, the first one might be open run what ya brung.

Sent from my SAMSUNG-SM-G900A using Tapatalk

I'd be up for that. I sold my scaler to build a short course truck.

[Creepy Inc.]

Saving up now, ECSC gets all of my attention at this time.

[Bottoms Up]

Who's building their trucks for this now?

Sent from my SAMSUNG-SM-G900A using Tapatalk

[stevem50]

any idea on a date and location?

[Bottoms Up]

Carderock Park, or Sugarloaf Mountain have been suggested.
We are going to vote on a date soon.
Sunday October 11th and Sunday October 18th have been suggested as to not interfere with Bobrocks the 1st weekend in October.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Bottoms Up]

Date has been set.

10:00am, Sunday OCTOBER 11th @ Carderock Park

Stay tuned for more details.

[rock addict]

SHit yeah... I will be there, watching you tools with your toys