RCCrawler Forums

Deezul · 10-07-2009, 01:15 PM

New shop just opened up in my area(Framingham). Wickedrc. Looks like they are going to be building a crawler course and stock crawler parts. Stopped there today its a cool place. Thanks HotrodCJ for the heads up. Its on RT 9 in Framingham by Walter Dyer leather.

HotRodCJ · 10-07-2009, 10:30 PM

he said they would have a section done this week, gonna stop by fri nite and check it out, mabey try out the bully on it.

Ipe · 10-08-2009, 10:49 AM

Good to know! My work is only about 2.5 miles from there so I'll have to stop by soon.

Ipe · 10-09-2009, 11:55 AM

Went to Wicked RC today at lunch. I was met by Gus (I'm assuming he's the owner). Gus told me that they had been open for just about a week now. They are in the process of getting lots of crawler specific parts and Gus said that they are going to be an authorized dealer for CKRC products.

They had a small crawling wall set up near the entrance. Gus showed me plans for a much larger crawling section that he said would be in place in about three weeks.

I happily made a small purchase of some Deans connectors and look forward to going back again. Having a crawler wall just a few miles from work is going to be huge this winter in helping to cure the wintertime blahs. Wifey's not going to be too pleased with having a shop so close by, but what can you do

Deezul · 10-09-2009, 03:42 PM

i gotta run out there tonight for paint. def hope they last

Rjohn929 · 10-15-2009, 03:05 PM

Stopped by there today and checked it out, nice big shop, lots of parts. Gus is a nice guy and is seems pretty excited to start getting into crawling. He said he should be getting some berg axles in this week and is trying to get them to let him sell the kits. He also said they are going to double the size of the little carpet track they have by the spring. I really hope he makes it.

Ipe · 10-22-2009, 09:32 AM

I was in again on Tuesday to pick up a new servo after the stock one on my AX10 RTC failed. I'm hooked up with a JR 8711 now. Way more better-er!

When I was there I was able to see that the crawler course is definitely taking shape, or at least the framing of it is. Oh, and more news, if you care about these things, is that Gus told me that Axial will be sponsoring crawling comps there. Thats pretty cool. I've never competed in crawling before but it could be fun, especially if a sportsman class is run (no budget = no 3rd channel = no dig = sportsman I guess :-P)

steve03609 · 10-23-2009, 07:16 AM

Not sure if pic will show up, but it looks like it will be a good winter spot

"N8" · 10-26-2009, 01:33 PM

Ya Gus is the man. Super nice dude, and seems like if he can make it, the store is gonna be fkn awesome! All who can should check it out.

c0astie31 · 10-26-2009, 03:04 PM

Anyone going there this week pm me I would love to go. Also I am in Weymouth, so anyone want to crawl let me know

tac9227 · 11-02-2009, 05:47 PM

I am interested.. Is the crawler course scale to ? Where is he located

Deezul · 11-08-2009, 07:52 PM

foam is in and being shaped..........gonna be a nice place for the cold weather! They are going to run the inner part as a "scale " course most likely. Stop in and check it out.

for the addy: 280 Worcester Rd. (RT 9E) 107 - Framingham MA 01702 - (50

405 2244

DRock9 · 11-16-2009, 06:54 AM

Does it look like its going to be good for the little MRC's?

Wicked is only about 20 minutes from my school in Boston and my house so if I can get in some solid crawling there I will be very happy. I am hoping it is actually a good comp course, and not one of those indoor tracks with only one challenging line and the rest you can just mob over.

Deezul · 11-16-2009, 09:20 PM

course had ALOT of work done to it over the last week......it's going to be sick. I dont see why you couldnt run an mrc if you wanted to, I am currently rebuilding my AX10 for comps(dig etc)

Deezul · 11-16-2009, 09:21 PM

Quote:

Originally Posted by DRock9

.one of those indoor tracks with only one challenging line and the rest you can just mob over.

def not........

WickedRC · 11-17-2009, 10:22 AM

Here are some pictures of the progress we've made so far, I think MRC's may have a bit of a hard time getting trough some of the stuff, especially the off camber sections. Let me know what you think.

Rjohn929 · 11-17-2009, 07:13 PM

No pics

Deezul · 11-18-2009, 09:20 PM

i see a pic......

DRock9 · 11-23-2009, 08:09 PM

I see an AMAZING picture! I am going to visit you guys real soon, maybe this upcoming thanksgiving break. I need a small ball end for my Losi Mini-T that you guys might have there but I am mostly going to check the place out.

You saying the MRC's will have a tough time through some parts is going to make me have to build a better comp rig to hopefully tackle everything the course has to offer...not much more to do except move to a brushless system.

Rjohn929 · 11-25-2009, 10:30 AM

I see it now! Looks great!

10-07-2009, 01:15 PM	#1
Deezul RCC Addict Join Date: Feb 2006 Location: ccxc Posts: 1,176	New Crawler spot New shop just opened up in my area(Framingham). Wickedrc. Looks like they are going to be building a crawler course and stock crawler parts. Stopped there today its a cool place. Thanks HotrodCJ for the heads up. Its on RT 9 in Framingham by Walter Dyer leather.

11-02-2009, 05:47 PM	#11
tac9227 Newbie Join Date: Aug 2008 Location: Middleboro Posts: 13	crawling I am interested.. Is the crawler course scale to ? Where is he located

11-17-2009, 10:22 AM	#16
WickedRC Rock Stacker Join Date: Oct 2009 Location: Boston Posts: 53	Here are some pictures of the progress we've made so far, I think MRC's may have a bit of a hard time getting trough some of the stuff, especially the off camber sections. Let me know what you think. Attached Images Last edited by WickedRC; 11-18-2009 at 07:12 AM.

10-07-2009, 10:30 PM	#2
HotRodCJ Pebble Pounder Join Date: Jun 2005 Location: boston Posts: 138	he said they would have a section done this week, gonna stop by fri nite and check it out, mabey try out the bully on it.

10-08-2009, 10:49 AM	#3
Ipe Newbie Join Date: Dec 2008 Location: Boston Posts: 36	Good to know! My work is only about 2.5 miles from there so I'll have to stop by soon.

10-09-2009, 11:55 AM	#4
Ipe Newbie Join Date: Dec 2008 Location: Boston Posts: 36	Went to Wicked RC today at lunch. I was met by Gus (I'm assuming he's the owner). Gus told me that they had been open for just about a week now. They are in the process of getting lots of crawler specific parts and Gus said that they are going to be an authorized dealer for CKRC products. They had a small crawling wall set up near the entrance. Gus showed me plans for a much larger crawling section that he said would be in place in about three weeks. I happily made a small purchase of some Deans connectors and look forward to going back again. Having a crawler wall just a few miles from work is going to be huge this winter in helping to cure the wintertime blahs. Wifey's not going to be too pleased with having a shop so close by, but what can you do

10-09-2009, 03:42 PM	#5
Deezul RCC Addict Join Date: Feb 2006 Location: ccxc Posts: 1,176	i gotta run out there tonight for paint. def hope they last

10-15-2009, 03:05 PM	#6
Rjohn929 RCC Addict Join Date: May 2009 Location: Weston Posts: 1,319	Stopped by there today and checked it out, nice big shop, lots of parts. Gus is a nice guy and is seems pretty excited to start getting into crawling. He said he should be getting some berg axles in this week and is trying to get them to let him sell the kits. He also said they are going to double the size of the little carpet track they have by the spring. I really hope he makes it.

10-22-2009, 09:32 AM	#7
Ipe Newbie Join Date: Dec 2008 Location: Boston Posts: 36	I was in again on Tuesday to pick up a new servo after the stock one on my AX10 RTC failed. I'm hooked up with a JR 8711 now. Way more better-er! When I was there I was able to see that the crawler course is definitely taking shape, or at least the framing of it is. Oh, and more news, if you care about these things, is that Gus told me that Axial will be sponsoring crawling comps there. Thats pretty cool. I've never competed in crawling before but it could be fun, especially if a sportsman class is run (no budget = no 3rd channel = no dig = sportsman I guess :-P)

10-23-2009, 07:16 AM	#8
steve03609 Newbie Join Date: Apr 2009 Location: New Bedford Posts: 3	Not sure if pic will show up, but it looks like it will be a good winter spot

10-26-2009, 01:33 PM	#9
"N8" Rock Stacker Join Date: Oct 2009 Location: Arlington Posts: 77	Ya Gus is the man. Super nice dude, and seems like if he can make it, the store is gonna be fkn awesome! All who can should check it out.

10-26-2009, 03:04 PM	#10
c0astie31 Pebble Pounder Join Date: Jan 2007 Location: WEYMOUTH Posts: 114	Anyone going there this week pm me I would love to go. Also I am in Weymouth, so anyone want to crawl let me know

11-08-2009, 07:52 PM	#12
Deezul RCC Addict Join Date: Feb 2006 Location: ccxc Posts: 1,176	foam is in and being shaped..........gonna be a nice place for the cold weather! They are going to run the inner part as a "scale " course most likely. Stop in and check it out. for the addy: 280 Worcester Rd. (RT 9E) 107 - Framingham MA 01702 - (50 405 2244

Sponsored Links

11-16-2009, 06:54 AM	#13
DRock9 Rock Stacker Join Date: Jun 2009 Location: USA Posts: 74	Does it look like its going to be good for the little MRC's? Wicked is only about 20 minutes from my school in Boston and my house so if I can get in some solid crawling there I will be very happy. I am hoping it is actually a good comp course, and not one of those indoor tracks with only one challenging line and the rest you can just mob over.

11-16-2009, 09:20 PM	#14
Deezul RCC Addict Join Date: Feb 2006 Location: ccxc Posts: 1,176	course had ALOT of work done to it over the last week......it's going to be sick. I dont see why you couldnt run an mrc if you wanted to, I am currently rebuilding my AX10 for comps(dig etc)

11-17-2009, 07:13 PM	#17
Rjohn929 RCC Addict Join Date: May 2009 Location: Weston Posts: 1,319	No pics

11-18-2009, 09:20 PM	#18
Deezul RCC Addict Join Date: Feb 2006 Location: ccxc Posts: 1,176	i see a pic......

11-23-2009, 08:09 PM	#19
DRock9 Rock Stacker Join Date: Jun 2009 Location: USA Posts: 74	I see an AMAZING picture! I am going to visit you guys real soon, maybe this upcoming thanksgiving break. I need a small ball end for my Losi Mini-T that you guys might have there but I am mostly going to check the place out. You saying the MRC's will have a tough time through some parts is going to make me have to build a better comp rig to hopefully tackle everything the course has to offer...not much more to do except move to a brushless system.

11-25-2009, 10:30 AM	#20
Rjohn929 RCC Addict Join Date: May 2009 Location: Weston Posts: 1,319	I see it now! Looks great!

RCCrawler Forums

Thread: New Crawler spot