Got bit by a Tarantula

[Gramps]

After crawling with the Tarantula a couple of times I decided it need a better turning radius. When I built it I had to turn the endpoint down to keep the big tires from rubbing on the frame. I had 3mm hex extensions so I got some 6mm hex extensions. This allowed some more turing radius but at 100% the tires still rubbed on th frame real bad. Turned the endpoints down to around 83% and I think it will be ok. The turning radius sure seems better. I'll know for sure the next time I take it out.





Moved the 3mm hex extensions to the rear, it seems to handle pretty well with the front track a little wider than the rear

[Gramps]

Took some video of the Tarantula's 1st run if anyone is interested.

https://rumble.com/v4hvxi0-tarantula-1st-crawl.html

[JimrC]

Originally Posted by Gramps

Took some video of the Tarantula's 1st run if anyone is interested.

https://rumble.com/v4hvxi0-tarantula-1st-crawl.html

That's good looking capable rig there Gramps I tried to give a like and comment but no joy as I'm not signed up there

[Gramps]

Originally Posted by JimrC

That's good looking capable rig there Gramps I tried to give a like and comment but no joy as I'm not signed up there

Thanks JimrC I was very happy with the way it crawled. That was a new place I just found and it was also the 1st time I have crawled there. Need to take the Evo Pro there and see how it does.

[King Dork]

Originally Posted by Gramps

Took some video of the Tarantula's 1st run if anyone is interested.

https://rumble.com/v4hvxi0-tarantula-1st-crawl.html

Looks good!

[Gramps]

Took the Tarantula & the CR18 Evo Pro for a little crawl yesterday. Can't say that one did better than the other I thought both crawled pretty good.

https://youtu.be/DAe7GIIGh54