03-24-2008, 08:37 AM | #1 |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
| Open shop night?
I'm just about finished with my new R/C shop located at 90th and France in Bloomington. Just wondering if there is any interest in an "open shop night"? If anyone is interested post up here. The shop has most everything needed for working on Rc's, brazing, welding, soldering, painting, cutting etc. If there is any interest? We can make the shop open just about any night of the week, it's located just a few minutes from my place, I can run over about any time. Yes Storm and Jack, it's fully wheelchair accessible I will also have a decent pile of rocks located just outside the shop for a test area, and I have plans for building an indoor test/crawling area as well. |
Sponsored Links | |
03-24-2008, 08:48 AM | #2 |
Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis
Posts: 4,660
|
Yes, I am in to point and laugh. I will definately be able to bring a few rigs and some portable crawling boards I made. Troy I got your number. With this new snow, I gotta run the Stampede again. Oh yeah the new Emaxx loves the snow too! Ryan |
03-24-2008, 10:20 AM | #3 | |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
| Quote:
That field by my place melted away, but is full of snow again, there's not even a track in it yet | |
03-24-2008, 11:36 AM | #4 |
Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis
Posts: 4,660
|
Troy I will call you after work. I got my stuff ready to rock out. Emaxx is charged and I think I got some new Pede Beadlocks from RC4wd here too! Oh, and tell your puppy to drink some extra water. Ryan |
03-24-2008, 01:09 PM | #5 |
RCC Addict Join Date: Apr 2006 Location: Minnehopeless
Posts: 1,129
| |
03-24-2008, 02:40 PM | #6 |
Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis
Posts: 4,660
|
Lol, yeah that pouch can haul. However I got a new spur (s) and some pinion (s) also...hee hee Ryan |
03-24-2008, 09:24 PM | #7 |
Rock Stacker Join Date: Apr 2006 Location: Cannon Falls
Posts: 74
| maddjack
Congrats on the new shop freetime. I'd love to come and have a look see.
|
03-25-2008, 02:39 AM | #8 |
Rock Crawler Join Date: Apr 2006 Location: Eau Claire
Posts: 776
|
Congrats Troy! Let me know when you get a lathe and a mill! If you're young enough to pull a all nighter here and there i'd be up for a road trip here and there I'd even supply the malted adult beverages Be good place to start #3 project But only if Kev keeps the French maid outfit put away! |
03-25-2008, 12:35 PM | #9 | |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
| Quote:
I have a crude mill, it's called a drill press Eventually I'd like to get some kind of lathe/milling machine, but for now, my sponsor Eritex has a CNC if I need things done, I'll go to Gerame As for all nighters, just about any Fri-Sat is fine for me. Anytime, anyone needs some space to work, extra tools, or some help, just post up here. The shop is always open to anyone/everyone. | |
03-25-2008, 03:05 PM | #10 |
Pebble Pounder Join Date: Nov 2006 Location: isanti, mn
Posts: 177
|
where is it?
|
03-25-2008, 04:01 PM | #11 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
|
Love the idea of open shop |
03-25-2008, 05:11 PM | #12 |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
| Unfortunately for you Joe, since you live "up North" its a ways, the shop is at 90th and France Ave So. in Bloomington. I'm open to most any night that works for others. People just need to post up. The shop is 3 miles from my place, literally less then 5 minutes for me. I'll probably be over there Fri night, and most of Sat this week, but can go over pretty much anytime. |
03-25-2008, 05:21 PM | #13 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
|
That's very cool Troy I'm going to check it out as soon as I'm over the flu. Yep that's part of my deal always sick WTF |
03-25-2008, 05:50 PM | #14 |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
| |
04-03-2008, 09:08 PM | #15 |
RCC Addict Join Date: Apr 2006 Location: Minnehopeless
Posts: 1,129
| I took a couple pics when a few of us got together at the shop the other day. And while there, I witnessed one of the rarest sightings ever... Baller wrenching. I think he actually changed a tire... all..by..himself. |
04-03-2008, 09:15 PM | #16 |
Rock Crawler Join Date: Apr 2006 Location: Eau Claire
Posts: 776
| |
04-03-2008, 09:22 PM | #17 |
Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis
Posts: 4,660
|
You guys are jerks.
|
04-04-2008, 09:00 PM | #18 |
Quarry Creeper Join Date: Feb 2008 Location: Oakdale, MN
Posts: 420
|
Hey, I work at the Bloomington Armory right on 98th. I'd like to try out the test area and get some tips on making my truck better... Jeff |
04-04-2008, 09:24 PM | #19 |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
| |
04-04-2008, 09:30 PM | #20 |
Quarry Creeper Join Date: Feb 2008 Location: Oakdale, MN
Posts: 420
|
Usually 6:00 to 3:00-3:30...
|
| |