11-07-2008, 12:17 PM | #1 |
Newbie Join Date: Jun 2006 Location: Lino-Lakes
Posts: 1
| Truck Pulling
Pulling and 1/18 th Monster Truck Racing Sunday Nov 9 1 pm The Mermaid in Mounds View Main Ball Room info call 651 786 1336 Jerry |
Sponsored Links | |
11-09-2008, 09:36 PM | #2 |
RCC Addict Join Date: Apr 2006 Location: Minnehopeless
Posts: 1,129
|
What a blast! I went out and checked the Pulls today and had a great time. They had a pretty good turnout for their first event. I counted 7 of our guys there, and a couple other guys I've met from other RC gatherings. The event as a whole ran very smoothly. They'd run the pullers for a couple rounds, then mix it up with some 18th scale monster truck racing. Thanks again to Junior for letting me run his little truck. Definitely a good time. Can't wait for the next meet. On to the pics. A nice welcome from your friends at Monster... I like it already. Some of the trucks that were there. The sled. Here are some of the runs. First up is Paul Songas; He's co-owner of the MN RC Drag Racing club. Paul experienced some carnage... 2 blown motors in 1 day. You guys may recognize these characters. The sled attaches to the tucks with a simple chain and hook. Say, if someone has a zip-tie, I could..... Oh yeah. You know I gotta try this. I maxed out at 30 lbs. And in between rounds there was the 18th scale monster trucks. Awesome. And if that wasn't enough, they even had the game on. Go Vikes! And I even caught a couple of the runs on film. Check 'em out. Paul Songas Jerry Junior If your interested in more pulling action, Jerry Sr. said to check out NRCTPA.org. |
11-09-2008, 10:03 PM | #3 |
ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana
Posts: 4,343
|
Cool pics Pimp. Last edited by chip cross; 11-17-2008 at 04:40 PM. |
11-10-2008, 06:54 AM | #4 |
RCC Addict Join Date: Apr 2006 Location: Minnehopeless
Posts: 1,129
| Last edited by chip cross; 11-17-2008 at 04:41 PM. |
11-10-2008, 06:50 PM | #5 |
Newbie Join Date: Nov 2008 Location: Stacy
Posts: 1
|
Hey Chip, come on up and try yourself, see where it gets you. Nice pics Kev. Last edited by Paul S; 11-10-2008 at 06:57 PM. |
11-10-2008, 11:26 PM | #6 |
RCC Addict Join Date: Apr 2006 Location: Minnehopeless
Posts: 1,129
| The case of mistaken identity...
Hey Paul, I think Chip has you mistaken for Paul Marcotte (Farakai here). He's asked me to deal with him before. It was good seeing you again Paul. Did you get that blazer from the guys in Hutchinson? Looks like they have a pretty slick design. |
11-11-2008, 06:55 AM | #7 |
Newbie Join Date: Nov 2008 Location: Stacy
Posts: 1
|
Good to see you too. Yeah, the Blazer chassis came from Hutch- Not a bad deal for the price, but needed some work after I got it. All you would need is a speed control and a 7 cell pack (if you don't already have them) and you are good to go. My extended truck came from Termyte Pulling Chassis. I ordered 2 new motors from Jerry yesterday, I am going to drop the pinions quite a bit so I don't lug the motors so bad and blow them up. Trial and error, mostly error the first week!! |
11-11-2008, 10:34 AM | #8 |
Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis
Posts: 4,660
|
Kevin and I have talked, I'm in. I will be looking for a chassis to run. I like the Hutch boys, but it is only a start... Only thing that sucks for me is the fact I have gotten rid of MOST of my Sub C cells. Oh well. Ryan |
11-11-2008, 12:07 PM | #9 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
|
There goes the neighborhood. |
11-11-2008, 04:04 PM | #10 |
Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis
Posts: 4,660
| |
11-11-2008, 06:47 PM | #11 |
Newbie Join Date: Jun 2006 Location: Lino-Lakes
Posts: 1
| Truck Pull
Nov 23 08 Next Truck Pull and Race same place same time. Come and join in the FUN Jerry. |
11-17-2008, 12:06 PM | #12 |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
|
I'm in I hope to have a truck to pull with by then This pull & race will take place after the MNRCRC Winter #1 meeting, at the same location at 10:00am. Hope to see a big turn-out for both |
11-17-2008, 12:42 PM | #13 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
| |
11-17-2008, 03:52 PM | #14 |
Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis
Posts: 4,660
| |
11-17-2008, 04:14 PM | #15 |
RCC Addict Join Date: Apr 2006 Location: Home of the ORIGINAL Terminator chassis
Posts: 1,252
|
The hotel let you guys run the pullers directly on their carpet? Anyone leave tire burn marks? Looks like a cool event. Were the 1/18th scale monsters run due to space constraints, or is there a club there for those in particular? You mostly see 1:10th scale monster racing. |
11-18-2008, 08:03 AM | #16 | |
RCC Addict Join Date: Apr 2006 Location: Minnehopeless
Posts: 1,129
| Quote:
There's not a club for the 1/18's that I know of. They mainly just ran them for fun. What's a tractor pull without a monster truck rally? | |
11-23-2008, 12:22 PM | #17 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
|
How about the rules NRCTPA? I hear they will be changing for 2009 |
11-24-2008, 05:54 PM | #18 |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
|
I just wanted to say thanks to Ken and crew and Jerry Sr and JR for putting on the event yetsterday, and hosting our MNRCRC club meeting See you in a couple weeks with a new motor in the puller! |
11-24-2008, 09:10 PM | #19 | |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
| Quote:
| |
11-24-2008, 09:40 PM | #20 |
Debunking old stereotypes Join Date: Feb 2006 Location: 1st and Amistad
Posts: 2,260
|
Give Jerry Sr a ring Storm, he'll be able to get you the rules. info call 651 786 1336 Jerry |
| |