Cross Mc6

[JN80]

Here is my latest acquisition, received yesterday in this condition

Today I spent the day remodeling it

[Szczerba]

Looks good. Like what you did with it!

I just had to replace the transmission with a stronger R2 one. See my build thread in this section.

[JN80]

hello thank also have an r2 already waiting in case the original does not handle cash, then put it in a way that I can disconnect or lock the front axle


Box for batteries

[Szczerba]

Cool boxes!

Here is what broke in my trans.
Szczerba's MC6 6x6

See this post for a possible fix, the main shaft likes to slide back and forth and causes the plastic piece to wear quickly.
See last two pictures that show washer.
Szczerba's MC6 6x6

[JN80]

Originally Posted by Szczerba

Cool boxes!

Here is what broke in my trans.
Szczerba's MC6 6x6

See this post for a possible fix, the main shaft likes to slide back and forth and causes the plastic piece to wear quickly.
See last two pictures that show washer.
Szczerba's MC6 6x6

Yes, when it came to my hand had the same problem the pin falls out but if insert a bit of pipe to make stop think it solves, I'll see when they start to ride it holds up

see if you can realize the design, I'm not very good at drawing

[JN80]

what you have to say of the axles, it hold up well?
I've thought in case not hang on put a t-rex 60

[Szczerba]

I see they sell a metal replacement.
CROSS-RC Alloy Planetary Gear Holder (1Pc.) for Cross-RC 1/12 Military Truck (92241242)

Originally Posted by JN80

what you have to say of the axles, it hold up well?
I've thought in case not hang on put a t-rex 60

The axles are holding up well but I try to not bind them up too hard.
I have TLT axles waiting to replace them if and when they do fail.

[meatmonkey]

What is is really saying when seemingly ancient TLT axles are the upgrade route?

[Szczerba]

Originally Posted by meatmonkey

What is is really saying when seemingly ancient TLT axles are the upgrade route?

It's saying TLTs are almost bullet proof, are easily setup for a 6x6 pass through and are the correct width for this truck.

[JN80]

box in place





and lot of running time

[Szczerba]

I was about to ask why such a big box but now I see, 10,000mah of powa!

I have a full spare bed, mostly unassembled if you ever need one.

[JN80]

Originally Posted by Szczerba

I was about to ask why such a big box but now I see, 10,000mah of powa!

I have a full spare bed, mostly unassembled if you ever need one.

Ok thanks , if I need tell something
yups 10 000 mah of power and the electronics will stay in the middle of batteries