RCCrawler Forums

rckcrawler · 03-07-2008, 07:52 AM

I just purchased the Copperhead chassis from RC4WD I just finished putting my Axial together last weekend and I ' am already buying aftermarket parts. I hope the wife does not find out

. I 'am also ordering my saddle pack and new springs. Can somebody point me in the right way on some beadlock wheels, I 'am not really liking the Axial beadlocks. So I may purchasing some new wheels also. Thanks for the help. I will post pics as soon as I get the chassis in.

12flex · 03-07-2008, 08:01 AM

Quote:

Originally Posted by rckcrawler

I just purchased the Copperhead chassis from RC4WD I just finished putting my Axial together last weekend and I ' am already buying aftermarket parts. I hope the wife does not find out

. I 'am also ordering my saddle pack and new springs. Can somebody point me in the right way on some beadlock wheels, I 'am not really liking the Axial beadlocks. So I may purchasing some new wheels also. Thanks for the help. I will post pics as soon as I get the chassis in.

just curious:
what specific problems are you having with the axial beadlocks. i see myself switching to some MSD's or something along those lines soon also.

yotachump · 03-07-2008, 08:20 AM

MSD beadlocks

rckcrawler · 03-07-2008, 08:23 AM

My screws keep backing out and the tire come unsealed. Also I cannot setup an account on tsccrawlers.com does anybody know the problem

PipeDreams · 03-07-2008, 08:26 AM

Proline's are pretty nice not near as beefy as MSD's though. Both would be bad a$$!

Question for ya... you runnin the copper head with ax-10 diffs? Wut tranny? I really wanna get a tuber and that was my first pic and still is just slowly finding more and more chassis that look good just not sure which one I should get.... I wanna run an ax tranny too with a vf dig... I've herd they are a little quiter? Got any pics?

Tanis · 03-07-2008, 08:27 AM

Quote:

Originally Posted by rckcrawler

My screws keep backing out and the tire come unsealed. Also I cannot setup an account on tsccrawlers.com does anybody know the problem

Use the "Contact us" at the bottom left of the main page. Kevin will try to help ya.

Flatcrawlr · 03-07-2008, 08:44 AM

These will be my next set:

http://www.rccrawler.com/forum/showthread.php?t=57769

NIK · 03-07-2008, 08:58 AM

mayhem engineering do some really nice wheels

this is my set i bought

rckcrawler · 03-07-2008, 09:05 AM

Quote:

Originally Posted by PipeDreams

Proline's are pretty nice not near as beefy as MSD's though. Both would be bad a$$!

Question for ya... you runnin the copper head with ax-10 diffs? Wut tranny? I really wanna get a tuber and that was my first pic and still is just slowly finding more and more chassis that look good just not sure which one I should get.... I wanna run an ax tranny too with a vf dig... I've herd they are a little quiter? Got any pics?

I will be running the Axial diff. and tranny, if I can on the 15th of this month I might order my dig. I haven't gotten the tuber in yet I just ordered it today. But as soon as I do I will post pics.

rckcrawler · 03-07-2008, 09:10 AM

Quote:

Originally Posted by Tanis

Use the "Contact us" at the bottom left of the main page. Kevin will try to help ya.

I tried to us the contact tab but it kept saying that I was putting in the wrong security numbers:-(. So I don't know what else to do. can you place an order over the phone?

rckcrawler · 03-07-2008, 09:17 AM

Sweet looking wheels Nik!!!!! I was thinking about getting the double whamy's or whatevre they was called. They have the ball bearings in the rims for added weight. But they never wrote me back to tell me if they could send it out before I went to Iraq.

PipeDreams · 03-07-2008, 09:58 AM

sounds good.... how did you get the chassis? isn't the chassis mounting for an r2d? did they just drill it for you to run the ax? or are you gonna do that? I REALLY wanna see this thing.... Sounds like your gonna do everything I want to do!

NIK · 03-07-2008, 12:20 PM

Quote:

Originally Posted by rckcrawler

Sweet looking wheels Nik!!!!! I was thinking about getting the double whamy's or whatevre they was called. They have the ball bearings in the rims for added weight. But they never wrote me back to tell me if they could send it out before I went to Iraq.

i bought them to lol but in black with silver rings

rckcrawler · 03-07-2008, 12:29 PM

Quote:

Originally Posted by PipeDreams

sounds good.... how did you get the chassis? isn't the chassis mounting for an r2d? did they just drill it for you to run the ax? or are you gonna do that? I REALLY wanna see this thing.... Sounds like your gonna do everything I want to do!

I don't know but on the website the tranny plate has multiple holes for transmissions so I will try that. If that doesn't work I will throw it away.j/k
Maybe I will just drill new holes in the skid plate for the tranny.But as soon as I get it I will take some detailed pics for you.

Mayhem Eng. · 03-07-2008, 12:31 PM

Your right we got your pm and failed to pm you back, Sorry about. If we can help get you a set of wheels let me know. Thanks Mayhem Eng.

Quote:

Originally Posted by rckcrawler

Sweet looking wheels Nik!!!!! I was thinking about getting the double whamy's or whatevre they was called. They have the ball bearings in the rims for added weight. But they never wrote me back to tell me if they could send it out before I went to Iraq.

EeePee · 03-07-2008, 12:34 PM

Quote:

Originally Posted by rckcrawler

I tried to us the contact tab but it kept saying that I was putting in the wrong security numbers:-(. So I don't know what else to do.

Email Kevin.

contact@thecrawlerstore

rckcrawler · 03-07-2008, 12:55 PM

Thanks Mayhem and Eeepee. Mayhem do you still have wheels for sale?

Mayhem Eng. · 03-08-2008, 01:19 AM

Yes, let me know. Thanks Mayhem Eng.

Quote:

Originally Posted by rckcrawler

Thanks Mayhem and Eeepee. Mayhem do you still have wheels for sale?

rckcrawler · 03-08-2008, 03:34 AM

I got my account setup on tcscrawlers.com so now I can order some more stuff.

rckcrawler · 03-08-2008, 11:19 AM

Well I ordered my saddle pack, internal springs, and new link plates. i will be so glad when everything gets here.

03-07-2008, 07:52 AM	#1
rckcrawler Quarry Creeper Join Date: Aug 2006 Location: Baumholder Posts: 477	Copperhead I just purchased the Copperhead chassis from RC4WD I just finished putting my Axial together last weekend and I ' am already buying aftermarket parts. I hope the wife does not find out. I 'am also ordering my saddle pack and new springs. Can somebody point me in the right way on some beadlock wheels, I 'am not really liking the Axial beadlocks. So I may purchasing some new wheels also. Thanks for the help. I will post pics as soon as I get the chassis in.

03-07-2008, 08:20 AM	#3
yotachump ghetto fabulous newbie Join Date: Sep 2007 Location: with your mom Posts: 2,526	MSD beadlocks

03-07-2008, 08:23 AM	#4
rckcrawler Quarry Creeper Join Date: Aug 2006 Location: Baumholder Posts: 477	My screws keep backing out and the tire come unsealed. Also I cannot setup an account on tsccrawlers.com does anybody know the problem

03-07-2008, 08:26 AM	#5
PipeDreams RCC Addict Join Date: Feb 2008 Location: Winnipeg Posts: 1,296	Proline's are pretty nice not near as beefy as MSD's though. Both would be bad a$$! Question for ya... you runnin the copper head with ax-10 diffs? Wut tranny? I really wanna get a tuber and that was my first pic and still is just slowly finding more and more chassis that look good just not sure which one I should get.... I wanna run an ax tranny too with a vf dig... I've herd they are a little quiter? Got any pics?

03-07-2008, 08:44 AM	#7
Flatcrawlr Quarry Creeper Join Date: Dec 2007 Location: OP KS Posts: 203	These will be my next set: http://www.rccrawler.com/forum/showthread.php?t=57769

03-07-2008, 08:58 AM	#8
NIK Pebble Pounder Join Date: Dec 2006 Location: uk Posts: 175	mayhem engineering do some really nice wheels this is my set i bought

03-07-2008, 09:17 AM	#11
rckcrawler Quarry Creeper Join Date: Aug 2006 Location: Baumholder Posts: 477	Sweet looking wheels Nik!!!!! I was thinking about getting the double whamy's or whatevre they was called. They have the ball bearings in the rims for added weight. But they never wrote me back to tell me if they could send it out before I went to Iraq.

03-07-2008, 09:58 AM	#12
PipeDreams RCC Addict Join Date: Feb 2008 Location: Winnipeg Posts: 1,296	sounds good.... how did you get the chassis? isn't the chassis mounting for an r2d? did they just drill it for you to run the ax? or are you gonna do that? I REALLY wanna see this thing.... Sounds like your gonna do everything I want to do!

03-07-2008, 12:55 PM	#17
rckcrawler Quarry Creeper Join Date: Aug 2006 Location: Baumholder Posts: 477	Thanks Mayhem and Eeepee. Mayhem do you still have wheels for sale?

03-08-2008, 03:34 AM	#19
rckcrawler Quarry Creeper Join Date: Aug 2006 Location: Baumholder Posts: 477	I got my account setup on tcscrawlers.com so now I can order some more stuff.

03-08-2008, 11:19 AM	#20
rckcrawler Quarry Creeper Join Date: Aug 2006 Location: Baumholder Posts: 477	Well I ordered my saddle pack, internal springs, and new link plates. i will be so glad when everything gets here.

Sponsored Links

RCCrawler Forums

Thread: Copperhead