Traxxas shocks on an AX10
 

I want to run a shorter shock on my AX10 and I want to run a traxxas set up. What series are you guys running out there?

i run the stock axial shocks setup in droop.... with springs under the piston.
then again, my ax10 is all on an xtrail chassis.
http://i38.tinypic.com/20rpr4i.jpg

Yeah. I have my stock Axials in droop with no internal springs, just oil. What are you using for internal springs?

I run the slash front big bores with rod end mod and losi springs. They come out under 4".
http://www.rcsuperstore.com/ProductD...A2660&CartID=1

Maxx shocks work well... and they are cheap.
Big bores are a higher end alternative
and For a short shock, rustler shocks seem to work well.

I had a friend run Jato 2.5" shocks and had good results. What I'm seeing here is that Traxxas shocks can work very well in this capacity. I appreciate all the posts. Off to ebay to see what's out there.

I picked up a set of Jato shocks (4) for $20.00. It's also a local pick up... NICE8)

The jato/revo shocks are really short!:shock: Especially for a stock axial chassis.:?

I may need to drill a new place to mount them is what you're saying?

What do you recommend?

I am running the maxx shocks on my comp rig. They are a great set-up.

I am running Traxxas bigbores and axial shafts I am also using a dubro rod end link. all in the droop setup w/ internal springs

running rustler fronts all around mine. been doing pretty well so far. leaked at first but a little lube on the o-rings took care of that

What about some E-Maxx Brushless 3908 Shocks?

good shocks. almost any of the traxxas shocks ide say its best to do the shock cap mod though

The what?

Does this need to be done or is it just better?

just better. allows for a much smoother operation. no binding

Does anyone have pics of some traxxas shock set up? These caps are freaking huge and rub against the chassis with those crazy grommet screws.