|
| LinkBack | Thread Tools | Display Modes |
05-15-2011, 04:57 PM | #1 |
Quarry Creeper Join Date: May 2010 Location: trinity
Posts: 295
| hey guy's need some help hey guy's ive gotten myself a tundra highlift and am pretty much done buildign the kit itself now need some help on servo's what is a good servo for the steering and what kidn of servo will i need for the shifting i was thinkign of a 300 ozer but don't want to blow a hundred bucsk on the one servo cause i now have to watch what i spend again im on ssi so have limited income took me six months' to get hte cash for the kit itself and will i be okay running it off my dx3e radio system and what is a good cheap lipo capable speed controler thank's guy's zach. |
Sponsored Links | |
05-16-2011, 04:50 PM | #2 |
I wanna be Dave Join Date: Dec 2008 Location: Madrid, IA
Posts: 2,015
|
since you are on a budget, for steering i would get a hitec 645mg (my highlift had one and is still going after 2 years) and for shifting nothing special is needed, i used a standard servo without any issues till it went underwater multiple times. your dx3e will work just fine and for a good lipo capable esc i would llok for a used sidewinder which can be found for around $50 on here
|
| |