|
| LinkBack | Thread Tools | Display Modes |
05-05-2006, 09:39 PM | #1 |
Newbie Join Date: Apr 2006 Location: In the Woods
Posts: 19
| Need Help with assembling TLT axles
I started building the axles tonight for the TLT. I locked the diffs with JB weld, put the axle cases together, and everything turns nice and smooth. Now here's the problem. when I put the steering kunckles on, the axles become real tight to turn. I'm just using the plastic bushings that come with the kit. Think that might be the problem?? Nothing seems to be binding up...when I turn the knuckles left and right, they move freely. Any help will be greatly appreciated. Rich |
Sponsored Links | |
05-05-2006, 09:46 PM | #2 |
Quarry Creeper Join Date: Aug 2005 Location: Crawlorado
Posts: 333
|
switch the knuckles side to side
|
05-05-2006, 09:58 PM | #3 |
Newbie Join Date: Apr 2006 Location: In the Woods
Posts: 19
|
Thanks...I'll go and give it a shot now.
|
05-05-2006, 10:06 PM | #4 |
Newbie Join Date: Apr 2006 Location: In the Woods
Posts: 19
|
That was it!! thank so much!! I didn't realize they were different dimensions between the top and bottom.
|
05-05-2006, 10:25 PM | #5 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
lmao i think i will be building mine this time next week i should have most of my tlt built
|
| |